ull RMS mails the day they were
published and was disgusted what media did with this conversation. In this
case I do not agree with the Guix statement
joint-statement-on-the-gnu-project...
Adam Pribyl
Shepherd is more like (sysv)init system, what's different is it is in
guile, ie. you may easily extended or script it like you did with init via
bash and like you can not with systemd because systemd only allows
ComplicatedSetOfPredefinedCrypticWordsToDoAnything.
To my experience systemd is go
fig
would be fine too inside the distro.
Just my 42 cent
--
Regards
Hartmut Goebel
Adam Pribyl
The GuixSD package page
https://www.gnu.org/software/guix/packages/
is getting somewhat large to load. It is also bit short sighted to list
all packages on one html page. Any plans what to with this?
Adam Pribyl
n in words (is it not there?), then it would be definitely
good.
Adam Pribyl
ed with
a ordinary word and I personaly always struggle with spelling.
Ludo’.
I hope, besides the name change, there is going to be some more
development on Shepherd then...
Adam Pribyl
. After some more package installation, that brought in the
glibc or something and reboot it started to work OK?! (Related to 3?)
Thanks! :-)
I am very impressed with the GuixSD advancement. Thanks to all.
Ludo’.
Adam Pribyl
simplify things a bit.
Nice! I'll test that when release comes...
Ludo’.
Adam Pribyl
eir names are only hashes. Does any
documentation/source
of information about what all those are exist? I couldn't find anything.
The .links directory takes
over 2GiB on my machine and I wonder why.
No idea. :)
Cheers,
--
Jan Synáček
Adam Pribyl
e/user")
in users list for some time. This works OK. Home dirs are not created by
default and this sets password to empty.
Adam Pribyl
ls and boots ok
Thats it.
Ludo’.
Adam Pribyl
mailing list archives; I don't know if perhaps my communication skills
were too bad.
Do not bother people with that - let them use what they want. To
understand this, people have to have some level of insight and will. They
may grow to that or not.
Taylan
Adam Pribyl
ought. I even used 1GB swap
and still no go.
The question is something I am interest in too - what is the minimum to
compile the guix(SD)? Does anybody know?
~~ Ricardo
Adam Pribyl
Luis,
your work on the website is very appreciated, just check result with
e.g.
https://validator.w3.org/
for syntax and other errors. Then it would be perfect.
Regards
Adam Pribyl
(d4n1)
Adam Pribyl
...
P.S.: With old kernel (Linux-Libre 3.18.4) it's work.
Thanks,
--
Daniel Pimentel (d4n1)
Adam Pribyl
show the state of the
distro you may expect. Adding info picture like diagrams is a good idea
too.
~~ Ricardo
Adam Pribyl
On Tue, 17 Feb 2015, Luis Felipe López Acevedo wrote:
El mar, 17-02-2015 a las 17:54 +0100, Adam Pribyl escribió:
The design is of course nice, but looks quite out of GNU style. No problem
with that, just it is bit surprising.
With GNU style you mean the colours used in gnu.org?
Just
...
Adam Pribyl
Attach it as a new SATA storage to new VB machine, enable PAE in
System/Processor tab, otherwise it may crash. Add another disk image to
install to and after a boot continue with install.
Adam Pribyl
GuixSD, though. I just wanted to share anyways.
Very nice. Just I am not sure why to change the existing Guix logo.
IMHO Guix and GSD need a symbols/icon - it is good for orientation.
And here is and asciiart version :)
(_ _)
\/
GuixSD
--
Luis Felipe López Acevedo
Adam Pribyl
On Fri, 30 Jan 2015, John Darrington wrote:
I kindof presumed it was the bandwidth to hydra which was the problem. Not the
machine itself.
Are you sure which problem needs to be solved before we spend $$$ on it?
Most of the time I was seeing that hydra is unresponsive and guix will
fetch th
ng the (use-package-modules).
Thanks a lot.
(of course the (emacs) was wrong too..)
Good luck!
p.
On 2015-01-30 at 13:06, quoth Adam Pribyl:
I've missed the testing! OK, installation went fine.
How can one add packages installed by default to config.scm?
I thought
(packages (cons* (em
I've missed the testing! OK, installation went fine.
How can one add packages installed by default to config.scm?
I thought
(packages (cons* (emacs) (xterm) (mc) %base-packages))
would do, but it did not.
Thanks
Adam Pribyl
ion
to install, but if there was some metapackage, like buildessential (I come
from Debian).
That last peeve is really just a missing feature, I do understand that it
will take some time to implement and I'm not really demanding it, just
extremely recommending it. But the first 2 are definitely pro
”, which someone proposed on IRC, but
it lacks those traits.)
Well well, ok. I think this is good, as it caused a lot of confusion.
Ludo’.
Adam Pribyl
not able to get that far...
Thanks anyway.
Adam Pribyl
ERROR: no code for module (json)
Backtrace:
In ice-9/boot-9.scm:
157: 12 [catch #t # ...]
In unknown file:
?: 11 [apply-smob/1 #]
In ice-9/boot-9.scm:
63: 10 [call-with-prompt prompt0 ...]
In ice-9/eval.scm:
432: 9 [eval # #]
In i
2a65yhh2ildqllyx9alg1zd-guix-latest.drv' failed
Regards
Adam Pribyl
I am not sure how big problem this could be, but I found today that guix
name is probably trademarked http://rtos.com/products/guix/
ure
would help), as useradd makes the usuall unix user, but is missing some
other things like a build directory...
Regards
Adam Pribyl
On Tue, 25 Nov 2014, Ludovic Courtès wrote:
Eric Bavier skribis:
Adam Pribyl writes:
On Tue, 25 Nov 2014, Ludovic Courtès wrote:
FYI, if you installed a system from 0.8, chances are that your root file
system is not cleanly unmounted (from what ext4 recovers without any
problems, but
axmn7ixgm3bbygba-guix-latest.drv'
failed with exit code 1
killing process 1095
guix pull: error: build failed: build of
`/gnu/store/haam2bdcnzqmbyscaxmn7ixgm3bbygba-guix-latest.drv' failed
Thanks,
Ludo’.
Adam Pribyl
like
Xorg -modulepath /root/.guix-profile/lib/xorg/modules/
not sure if there is some more elegant way, but this worked.
Adam Pribyl
On Sun, 23 Nov 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Great, this is it! I had
(services (cons (dhcp-client-service)
%base-services))
(services (cons (lsh-service #:port-number 22 #:root-login? #t)
%base-services))
Oh, OK. Ideally an
On Sat, 22 Nov 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Could you post your configuration?
I have something like this:
--8<---cut here---start->8---
(services (cons* (slim-service)
(avahi-service)
at all providing networking.
I totally understand if you do not want to take up time trying to
solve newbie errors. However, my hope is that these problems provide
useful information for guix development.
It’s definitely useful!
Thanks,
Ludo’.
Adam Pribyl
On Sat, 22 Nov 2014, Alex Kost wrote:
Adam Pribyl (2014-11-22 01:28 +0300) wrote:
I have folloed the instruction in
http://www.gnu.org/software/guix/manual/guix.html#Emacs-Interface
to get the emacs interface for guix, but there is something missing
probably.
Installation of emacs and geiser
installation, I had to find guix.el in
the /gnu/store), after that I can start emacs and "M-x guix-..." but every
action says "Cannot open load file: no such file or directory
geiser-mode".
There should probably be also the geiser path in the emacs init file or
something?
Adam Pribyl
On Fri, 21 Nov 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
On Fri, 21 Nov 2014, Adam Pribyl wrote:
I am not sure if the doc is wrong or it has changed in the guix but
the definition of lsh service as it is at
http://www.gnu.org/software/guix/manual/html_node/Using-the-Configuration
On Fri, 21 Nov 2014, Adam Pribyl wrote:
I am not sure if the doc is wrong or it has changed in the guix but the
definition of lsh service as it is at
http://www.gnu.org/software/guix/manual/html_node/Using-the-Configuration-System.html#Using-the-Configuration-System
(services (cons (lsh
#Networking-Services
regards
Adam Pribyl
On Tue, 18 Nov 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
I am testing the 0.8 Guix release as announced. Installation went
pretty smooth from USB. Noticed network devices are now renamed to
"unique" names. Fine, but one should be careful when starting
networking and "e
Without substitutes this fails after long build at dependency
"perl after 3600 seconds of silent". There is plenty of disk space this
time (200GB) but I am probably still missing something essential to use
guix as source based distro.
From substitutes "mc" installs OK.
Regards
Adam Pribyl
I am trying to find a way to update the existing installation of guix I
did from gnu-usb-install-0.7 image to latest state of art, but guix pull
fails... could someone point me how to do this, or is it not possible ATM?
Thanks
Adam Pribyl
ore/-guix-0./share/guix/hydra.gnu.org.pub
2014-09-07 19:47 GMT+02:00 Manolis Ragkousis :
The builds take place in the /tmp folder ,so try increasing the size of
that folder.
Adam Pribyl
Thanks for the release. It works very good.
Few questions:
- Why "guix package -I" shows me for newly installed system nothing - no
packages installed? It shows just additionally installed ones.
- How should I add may own services, or add something like sshd? I've read
the doc so far, I may
On Thu, 24 Jul 2014, David Thompson wrote:
Adam Pribyl writes:
I can not boot installed system, boot looks for /dev/sda1 which is not
present. It smells to me like the same problem with devtmpfs previously in
live USB... I found in grub the reference to /dev/sda1 (as LiveUSB now
with udev in
mewhat long due to missing firmware for a Radeon graphics
card and "fatal error during GPU init". This is probably due to
linux-libre kernel. I am not sure if this could be mitigated somehow,
generally is not a problem.
Thanks,
Ludo’.
Adam Pribyl
On Mon, 21 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Kernel in dmesg identifies the device like /dev/sdf, doing
mknod /dev/sdf b 8 80; mknod /dev/sdf1 b 8 81; mount /dev/sdf1 /mnt
solves the problem. So definitely the drive is at sdf. It looks to me
like there is some built in
On Mon, 21 Jul 2014, Adam Pribyl wrote:
this involved
mount /dev/sdf1 /mnt/
cp -a /gnu /mnt/
mount -o bind /mnt/gnu /gnu
from now on, the target /mnt/gnu is filling up during guix system init.
it ends up with
initializing operating system under "/mnt"
copying '/gnu..gli
On Mon, 21 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Kernel in dmesg identifies the device like /dev/sdf, doing
mknod /dev/sdf b 8 80; mknod /dev/sdf1 b 8 81; mount /dev/sdf1 /mnt
solves the problem. So definitely the drive is at sdf. It looks to me
like there is some built in
On Sun, 20 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Sorry, I was completely wrong, the new liveUSB has e2fsprogs,
however I probably do have the problem with ahci module too, and I
confused the old /dev/sda
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
Sorry, I was completely wrong, the new liveUSB has e2fsprogs,
however I probably do have the problem with ahci module too, and I
confused the old /dev/sda harddrive which is now missing, and
/dev/sda USB. So this is it. My HDD
On Sat, 19 Jul 2014, Adam Pribyl wrote:
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
[...]
The installation image’s root is mounted by label. So if you happen to
have a different partition with the label ‘gnu-disk-image
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
[...]
The installation image’s root is mounted by label. So if you happen to
have a different partition with the label ‘gnu-disk-image’, then it may
end up mounting the wrong
On Sat, 19 Jul 2014, Ludovic Courtès wrote:
Adam Pribyl skribis:
On Fri, 18 Jul 2014, Ludovic Courtès wrote:
I’ve uploaded a new USB installation image for x86_64 for testing:
http://www.fdn.fr/~lcourtes/software/guix/gnu-usb-install-20140718.x86_64.xz
SHA1
On Fri, 18 Jul 2014, David Thompson wrote:
Adam Pribyl writes:
Booted fine, but mounted my HDD install root /dev/sda1 as /real-root and I
can not unmount it or
find /real-root...
Try `mkdir /real-root` first?
Making this directory on USB flash with guix root did not change anything.
IMHO
welcome!
I did not get too far.
Booted fine, but mounted my HDD install root /dev/sda1 as /real-root and I
can not unmount it or find /real-root...
Ludo’.
Adam Pribyl
welcome!
I did not get too far.
Booted fine, but mounted my HDD install root /dev/sda1 as /real-root and I
can not unmount it or
find /real-root...
Ludo’.
Adam Pribyl
image was built with
guix system disk-image gnu/system/install.scm --image-size=800MiB
as of commit 1ddbd9f.
Ludo’.
Otherwise thanks for this achievemnt, the installation is really
strightforward.
Regards
Adam Pribyl
part of it? Or is it that Guix
itself is the GNU system...?
"Marketing" only a "GNU system" name is going to be bit hard, if I would
be asked I would vote for some more unique name like GuixOS.. whatever. Or
do I miss the point completely?
Adam Pribyl
ed it up.. right? but no clue what gets wrong this time.
However I am probably doomed to not get this rolling.
But I’m sure you’ll find other things that are under-documented or
undocumented. Don’t hesitate to report them.
Of course, as soon I am not drowning myself.
Thanks,
Ludo’.
Thank you anyway.
Adam Pribyl
On Thu, 12 Jun 2014, Ludovic Courtès wrote:
Hi,
Adam Pribyl skribis:
As there is no user list, let me use this one.
I am trying the GNU Guix 0.6 as published in
https://savannah.gnu.org/forum/forum.php?forum_id=7939
I suppose you’re referring to the VM image, right?
Yes..
however
r disable anything as I do not know what is
available.
Documentation for both is not very helpful ATM... :(
Thanx for hints
Adam Pribyl
64 matches
Mail list logo