Hello, I follow a cool project, PrivacyBrowser, by Soren Stoutner.
I have been eagerly awaiting its inclusion in Guix, but for some reason
it has stalled, and no response has been given to the developer. See
chain here:
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=64408
Can an
store item -
because their outputs need to be installed with special ownership / file
permissions, as they will contain passwords / keys required by the daemons to
run.
But since there will be multiple instances of that record, I'd get some
function returning a list of G-Exp's. To s
Am 3. Mai 2023 17:31:40 MESZ schrieb Olivier Dion via :
>On Wed, 03 May 2023, Gottfried wrote:
>
>> /gnu/store/5h2w4qi9hk1qzzgi1w83220ydslinr4s-glibc-2.33/lib/libpthread.so.0:
>> undefined symbol: __libc_pthread_init, version GLIBC_PRIVATE
>
>Looks like something similar that I had with gnome-twe
Am 29. April 2023 18:18:26 MESZ schrieb Skyler :
>In order to avoid manually updating the alias each time the package is
>upgraded, you can use a declaration in guix home:
>
>(home-environemnt
> (services (list
>(service home-bash-service-type
> (home-bash-configuration (guix-defaults? #
Am 28.04.23 um 17:07 schrieb Gottfried:
Hi,
I have 2 profiles, one with Musescore 3.6.2, the other with Musescore
4.02 (the last version, ongoing).
When I enter "mscore" in the terminal it opens the version 3.6.2, which
I want.
But what do I have to enter in the terminal to get the new ve
Am 28.04.23 um 17:15 schrieb Gottfried:
Hi,
1.
I have the old version of Musescore 3.6.2 which I want in one profile.
When I update all profiles at once through a script, it also builds
locally the old version of Musescore, which needs 1 hour on my laptop.
Firstly, why it always builds it o
Am 23.04.23 um 15:12 schrieb Gottfried:
Hi,
thanks very much for your help.
I did it, and when I use:
Alt + F2 and enter "icecat" it opens
or in the terminal I enter: "icecat" it opens.
Good.
But in the application menu there are no icon for "icecat"
So basically I get the packages thr
y in one
of your custom profiles, it means they must have been actived by the
login shell you started. So your .bash_profile seems to work.
Martin Castillo
Small correction to the mail I just sent:
Instead of
env - bash -l
you might need to use
env - $(which bash) -l
rofile.
To test 2) start a login shell with a clean environment
env - bash -l
and check whether that shell has all the profiles activated. If not,
there is something wrong with your .bash_profile. You should post that then.
Martin
]: Somewhat helpful archwiki entry:
https://wiki.archlinux.org/title/environment_variables#Graphical_environment
Martin
therefore it influenced the environment
variables of all applications started the graphical environment.
Gottfried, what display-manager do you use?
Maybe this command can tell you:
$ ps $(ps -p $(pidof Xorg) -o ppid=)
Martin
startup be‐
havior of historical versions of sh as closely as possible, while con‐
forming to the POSIX standard as well.
Martin
ore it logs you in.
In that case, you don't need to launch bash as login shell in your
terminal, because all the profiles are activated when you login.
Martin
==
Does anyone know if there's a more accurate way of finding out this
information? I'm asking because my method also counts build systems
that are mentioned in comments. For example, if a file contains
comments that mention build systems, they are also counted.
,--
Hi,
Am 01.04.23 um 13:42 schrieb Gottfried:
Hallo,
im Handbuch, Kapitel 14 Dokumentation
gibt es ganz unten (vor den Fußnoten)
Siehe "Einstieg in Guix" in Info
After comparing this with the english version it seems the two words "in
Guix" are wrong and it should have been "Einstieg in Inf
;t know, whether one can enable it on the fly, after you already
invoked the guix command without -v3.
Martin
Hi,
Am 27.03.23 um 12:21 schrieb SeerLite:
Hi! Is it maybe Polkit? Polkit was stopping me from suspending my laptop via
SSH. The exact same behavior as you: no output and error code 1.
Since the only `loginctl` command I cared about was `suspend`, I added my user
to the `power` group, added t
Hi,
Am 26.03.23 um 15:07 schrieb Gottfried:
Hi,
thank you very much for your help.
I am learning day by day how to use Guix.
1.
I understood till now that creating manifests mean several packages in
one manifest, like in my music profile: ardour, audacity, audacious,
musescore.
You mean `i
Hi,
Am 26.03.23 um 10:16 schrieb Gottfried:
please send the command you used to update the profile and the
manifest file inside the profile, i.e.
home/gfp/Projekte/Musik/guix-profil/manifest.scm
Martin
This was the command I used to upgrade the profile
(because I deleted one package
Hi,
please send the command you used to update the profile and the manifest file
inside the profile, i.e. home/gfp/Projekte/Musik/guix-profil/manifest.scm
Martin
Hi,
Could it be that something is holding an inhibit lock on shutdown? I
think ssh can do that. It might even be automatic??
Try running elogind-inhibit with no arguments.
$ elogind-inhibit
WHOUID USER PID COMMWHAT
WHY
t should. My (approximate) configuration.scm is attached.
Martin;; This is an operating system configuration generated
;; by the graphical installer and adapted manually.
(use-modules (gnu))
(use-package-modules ssh)
(use-service-modules desktop networking ssh xorg)
(operating-system
(locale
ories even exist. If one of
those doesn't, cd will print an Error:
bash: cd: Musik/Noten: Datei oder Verzeichnis nicht gefunden
)
Example 2: If THE_FILENAME.pdf was for example on your desktop, you could do
cp ~/Desktop/THE_FILENAME.pdf ~/Dokumente/songbook-v0.1.pdf
to copy it to Dokumente and give it a different name at once.
Martin
ome, which should be
what you are looking for.
I haven't used it, so I can't give you anymore hints than
`info guix home`
Martin
6: In procedure raise-exception:
>substitute: In procedure write_wait_fd: unimplemented
>guix time-machine: Fehler:
>`/gnu/store/nn61n9c91vvxf95fs5n3ldxqf3klnsgf-guix-1.4.0-4.01fd830/bin/guix
>substitute' died unexpectedly
>
610c84c381f7 --
shell musescore
The first time time-machine failed to build the older version of guix.
It used up to much ram and was killed by the OOM-killer. (I'm using it
inside a vm.) Otherwise it should work.
A downside of this approach is that you cannot mix the older musescore
.6.2.
9f93bcd1862c76d7ff30da6f712c9bd2912b8346 switched to 4.0. So it's parent
commit should have the newest dependencies which might work with current
guix.
I don't have time right now, but you might want to copy such an older
package definition into your manifest.scm
Martin
Hi,
Am 18.03.23 um 11:50 schrieb Gottfried:
> Hi,
>
> I wanted to create a manifest for music,
>
.
> my "musik.scm":
>
> ;; Manifest Musik Programme
> (use-modules (gnu packages version-control))If this is t
/.config/ibus/rime
> | /home/rdrg/.config/ibus/rime/default.custom.yaml
> `----
>
>
>4 The question
>==
>
> How to define a package that install files to any directory under
> `~/.config/'?
Hi,
I think packages cannot install files outside the store.
Maybe you could try and see, whether ibus looks at a special environment
variable to find configs in another directory, too. Then you could define that
environment variable in your package and it will be added to your guix profile.
I dont know ibus, but:
Otherwise you may need to adjust the system-wide installed ibus package and add
that configuration that you want to it.
Martin
Am 13.03.23 um 01:26 schrieb Martin Castillo> Now the build fails trying
to download dependencies:
Ok, naturally, we don't want go to access the internet to get the
dependencies.
I tried adding (inputs (list go-github-com-minio-sha256-simd))
to the package, but go still tries to get
Hi,
Am 07.03.23 um 16:50 schrieb Ludovic Courtès:
Hi Martin,
Sorry for the late reply.
Martin Castillo skribis:
[...]
/mnt/root/man.config.scm:35:14: warning: the 'target' field is
deprecated, please use 'targets' instead
guix system: warning: Consider running
c/resolv.conf says
nameserver 10.0.2.3
I don't have a nameserver running on ::1. And this inside qemu, where I
didn't set up anything specifically for ipv6. I have only site and link
local ipv6 addresses. Why does go-build-system try to resolve the host
names at [::1]:53?
Martin
ition in 'file-systems'. Why is that not sufficient?
If I remove the dependency in swap-devices, it builds, though the system
gets stuck on boot shortly after generating ssh keys. Picture is
attached. Any hints for that problem?
Martin
(use-modules (gnu))
(use-service-modules desktop net
't know, why/how this works. I do have a 1M grub partition,
though I believe I just followed a bad guide and it is only used on
bios+gpt systems.
Is there something wrong with my config.scm, or is this a guix bug?
Martin Castillo;; This is an operating system configuration generated
;;
stop-signal: #f>
phase `build' failed after 16.0 seconds
command "./build.sh" failed with status 1
```
What to do in such cases? Any help is welcome!
Thanks in advance & kind regards,
Martin
7; not found in profile
```
Thanks in advance for your hints!
Kind regards,
Martin
Hi,
Am 25.02.22 um 19:49 schrieb Gottfried:
My answer is under your email:
Am 25.02.22 um 16:40 schrieb Martin Castillo:
Am 25.02.22 um 15:06 schrieb Gottfried:
Sorry, I don't know any further.
Try executing
/gnu/store/hchyj7faw7f98njsja27i89v3jk7bbqm-icecat-91.6.0-guix0-preview
Am 25.02.22 um 15:06 schrieb Gottfried:
Hi,
Last idea:
check that the output of
realpath /home/gfp/.guix-profile/bin/icecat
is /gnu/store/hchyj7faw7f98njsja27i89v3jk7bbqm- icecat-
91.6.0- guix0-preview1/bin/icecat
and that icecat --version is something lik
rofile/sbin?
What's the output of type -a icecat?
If I run in root:
root@Tuxedo ~# guix package --list-installed
nothing comes up
gottfried
Am 22.02.22 um 23:20 schrieb Martin Castillo:
Hi,
Am 22.02.22 um 19:33 schrieb Gottfried:
Hi,
I upgraded my system and IceCat updated to 91.6
Even AltGr+SysRq+REISUB does not work.
I know you cannot recommend unfree software, but I'd like to use that
machine instead of throwing it away, even if I need some binary blobs.
How can I install the necessary firmware?
TIA,
Martin
[1]: https://seafile.zfn.uni-bremen.de/d/08f98eca117f41ebaea4/
is best practice.
Someone else might know more.
Martin
I'm back.
On 17.02.22 01:40, Martin Castillo wrote:
But here I did not know how to proceed? There is no grub-install in this
chrooted /gnu/store(, which is weird, because a complete system should
contain all files to update itself, right?).
What am I missing?
Or can you only create a
ich is weird, because a complete system should
contain all files to update itself, right?).
What am I missing?
Or can you only create an EFI system installation when you're already
running on one?
Thanks,
Martin Castillo
;; This is an operating system configuration generated
;; by the
he graphical installer.
(use-modules (gnu))
(use-service-modules desktop networking ssh xorg)
(operating-system
(locale "de_DE.utf8")
(timezone "Europe/Berlin")
(keyboard-layout (keyboard-layout "de" "neo"))
(host-name "geex")
(users (cons
o you have an idea how to fix this?
Thanks in advance,
Martin
Hi Paul,
thank you, using TEXINPUTS solved it for me!
−Martin
any thanks in advance!
—Martin
I would also be willing to tip for this! Someone do let us know if that's
possible.
Martin
On Thu, Dec 24, 2020 at 3:44 PM sullentrapdoor
wrote:
> Thank you Joshua!
>
> I appreciate you tracking down the commit (and committer). Searching
> Mikhail Tsykalov I did not find any
,
Martin
: (0444/-r--r--r--) Uid: (0/root) Gid: (0/root)
Access: 2020-10-21 16:55:28.815206042 +0200
Modify: 1970-01-01 01:00:01.0 +0100
Change: 2020-10-18 17:54:21.263040662 +0200
Birth: 2020-10-18 17:54:21.263040662 +0200
Thanks in advance,
-- Martin
try "http://…"; for all the
environment variables http_proxy, https_proxy, ftp_proxy. And in
config.scm, there is only one field "http-proxy" which can be specified.
So unfortunately, this does not help. The strange thing is that during
`guix install` it also downloads from https without problems.
−Martin
oxy "http://:")
Thanks for any ideas,
Martin
On 11.04.2018 11:40, Pierre Neidhardt wrote:
>
> Sorry if I was confusing: the output remains the same after upgrade.
>
> I can repeat the command indefinitely, it keep "upgrading" the same set
> of packages as per the output (but it does not actually do anything).
>
I see the same on 792ddfdc761
I think he means that you need to add libass to the inputs of the vlc
package. look a few lines under where $ guix edit vlc; takes you. try
adding it there.
On 13.03.2018 03:01, Dang Duong wrote:
> My video.scm already has libass. I tried removing and reinstalling VLC
> but it doesn't work.
> Am
other post
in guix-devel or help-guix.
Martin
[0]: https://lists.gnu.org/archive/html/guix-devel/2017-12/msg00134.html
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
signature.asc
Description: OpenPGP digital signature
xpect everyone who wants to configure something, that is
not yet configurable, to patch guix themself or ask the others to do it?
What about adding a field 'extraOptions' which is a simple string that
is appended to the configuration file?
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13
On 06.02.2018 21:01, Leo Famulari wrote:
> On Sat, Jan 27, 2018 at 11:08:23PM +0100, Martin Castillo wrote:
>> my configuration is (similar to) desk,nossh.scm.
>
> Can you share the QEMU command line you use to run desk,nossh.scm?
>
qemu-system-x86_64 -m 2048
On 29.01.2018 18:00, Ludovic Courtès wrote:
> Hi Martin,
>
> Martin Castillo skribis:
>
>> i have a problem with the ssh-service. I want it to autostart on system
>> boot.
>>
>> my configuration is (similar to) desk,nossh.scm.
>
> I tried t
aemon could not be started'. Thank you
shepherd, very helpful!
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
;; Running in Qemu.
;; This config has no gui. ssh-daemon starts and is reachable from outside
(use-modules (gnu) (gnu system nss))
(use-service-modules ssh)
hi
On 22.01.2018 07:30, Chris Marusich wrote:
> Martin Castillo writes:
>
>> hi,
>>
>> I want to add one file to xorg.conf.d, but can't find the right way to
>> do so. my current solution just appends my xsettings to xorg.conf:
>>
>> (define cybor
evaluates to a file or so. Is my
observation correct? If yes, is this wanted?
Martin
here?
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
iate. Thank you.
I think guile can critisize syntax errors, too.
try `guix system build config.scm`
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
browser
> other than GNU IceCat).
>
> I don't know if help-guix mailing list will be able to answer as
> precisely as the original projects.
>
> 2017-12-14T00:06:56+0100 Martin Castillo wrote:
>> I have problems with librejs on android. Even if I deactivate it, some
I have a graphical system running and wanted to man xorg.conf.
But that failed. I have to install xorg-server to get the manuals.
Why is that so? the system wide manpath was included in my
environment(as is default on guixsd).
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
this page".
>
> Of course, this may quite likely be an upstream problem.
>
> —Marco
>
I have problems with librejs on android. Even if I deactivate it, some
sites don't work. They work in firefox, though. This might be (part of)
the problem.
Martin
--
GPG: 7FDE 7190 2F73 2C50 236E 403D CC13 48F1 E644 08EC
g the first solution, use bios and not uefi, there are 2 ways to
format a disk. Gpt and msdos/mbr. If you choose gpt, you'll need a second 1mb
partition for grub.
HTH.
Martin
I currently have no access to a system with guix installed, but did you try
$ guix package install lilypond@2.18.2
?
Martin
tem guix instance with my
own, modified checkout somehow?
3) I need to develop a few new packages for my needs. Is there a way to
add additional package sources so I can conveniently use my own packages
alongside the ones provides in the official Guix repo?
Thanks for listening ;)
Best
Martin
70 matches
Mail list logo