Hello Donald,
On 11 mai, 23:15, Donald Johnston wrote:
> Matthieu … I just tested this level and it works well for me except for the
> following two points.
>
> 1. when I start Hugin there is a whitish-grey rectangular box sitting in
> front of the "Tip of the Day" window. I can just see the t
Matthieu … I just tested this level and it works well for me except for the
following two points.
1. when I start Hugin there is a whitish-grey rectangular box sitting in front
of the "Tip of the Day" window. I can just see the top of that window enough
that I can drag it out from under the re
Hi,
> The only problems I see are :
> - on 10.6, you have an error if you try to run hugin_python from the
> command line and import hsi; you can nevertheless import wx (but it's a
> small consolation)
This one I resolved : you can now use hugin_python from the command
line and import wx and hs
Hello,
I have built a new version based on the 2013.0 branch that now has Python
support for 10.6 and with wxPython embedded, which means that the plugin
"Crop Control Points" works.
It is here :
http://matthieu.desile.free.fr/hugin/Hugin-Release-2013.0.0.6316-68a477c87b0a-10.6.dmg
It is a 64
Hello,
I said in my last email that the python scripting part did work, but not
always. I now better understand how python works (mostly) and I embedded it
more completely than before, so that it should work.
Here is a build that should work on 10.6 (thanks Harry and Carl), with the
"Actions"
Hi,
It seems building for OSX 10.6 on a 10.8 mac can be difficult.
I checked the libpano13 building process and the macosx-min-version=10.6
was set as it should be, I was using ./configure, not cmake as I thought.
So, long story short, I got a 10.6 sdk and I built libpano and wxWidgets
using t
Hi,
I am away until monday, so I can not say for sure, but I think I used cmake to
build libpano. I will try with configure and post an update as soon as possible.
Cheers,
Matthieu
--
--
You received this message because you are subscribed to the Google Groups
"Hugin and other free panorami
2013/4/12 Carl von Einem
> Salut Matthieu,
>
> furai schrieb am 11.04.13 09:57:
>
>
>> Just a quick update : I have finally built the hsi part and it seems
>> to work fine (here).
>> So here is a new archive, with the latest revision, compatible with
>> MacOSX 10.6 to 10.8, 32 and 64 bits.
>> htt
Salut Matthieu,
furai schrieb am 11.04.13 09:57:
Just a quick update : I have finally built the hsi part and it seems
to work fine (here).
So here is a new archive, with the latest revision, compatible with
MacOSX 10.6 to 10.8, 32 and 64 bits.
http://matthieu.desile.free.fr/hugin/Hugin-Release-
Hello,
Just a quick update : I have finally built the hsi part and it seems
to work fine (here).
So here is a new archive, with the latest revision, compatible with
MacOSX 10.6 to 10.8, 32 and 64 bits.
http://matthieu.desile.free.fr/hugin/Hugin-Release-2013.0.0.6286-fdd381ca1714-10.6.dmg
Chee
10 matches
Mail list logo