Hi Chris, Luca, David (Posted a reply off list),
Im running Junos 10.1R1.8.
The current configuration im using is shown below.
The configuration is accepted, and I see some flow exports to my collector.
But the traffic received at the collector is arriving at an interval og about
60 seconds,
Peter,
the config provided is working fine on 10.2R1.8
Sampling must indeed be enabled at logical interface level with
something like this:
ge-3/0/7 {
link-mode full-duplex;
unit 0 {
family inet {
sampling {
input;
}
address
Stefan Schlesinger s...@ono.at wrote:
I'm trying to get RANCID to work with jlogin on my SRX100. I
configured my router.db and .cloginrc. The following command
can login to the router, but it doesn't backup anything.
$ bin/jlogin -f .cloginrc 192.168.0.13
Check what's in rancid's
-Original Message-
From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
boun...@puck.nether.net] On Behalf Of David DeSimone
Sent: Friday, July 16, 2010 3:40 AM
To: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] Juniper RANCID
99% of rancid's problems stem from failing
Hi Peter,
On Fri, Jul 16, 2010 at 08:01:34AM +0200, Peter Krupl wrote:
2.
As my box is running as PE, I think the mpls-ipv4 template is the one to use,
am I correct ?
It depends what you are trying to do with the NetFlow export; if
you are a SP and are sampling public internet traffic
On Jul 16, 2010, at 03:11 , ck wrote:
your output is expected behavior. jlogin is just an expect script that logs
into the devices.
if you're configuration is complete (with cron job/etc and you just want to
test you can run the following /blah/blah/rancid/bin/rancid-run to run rancid
Hi folks,
I faced that SRX CPU utilization reaches to 100% suddenly after configuring
three policies with address groups of 90 addresses. And then the telnet
session was also broken for 2 mins approx but resume after that time.
has any body experienced this? I am using junos 10.0R3.10
Two weeks ago we fired up two new mx240's running 10.1R1.8 and shortly after I
noticed a large (and growing!) log file:
file list /var/log/pfed_event_trace.log
Well it seems to be a bug in EX series with backup RE. However it must be more
widespread because we have MX with no backup RE!
Yes, it came back to normal with in this time and this is SRX3600 in chassis
cluster.
regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fa...@pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://www.linkedin.com/in/muhammadfahadkhan
On Fri, Jul 16,
I've got what I think should be a fairly vanilla hub-and-spoke
VPN configuration. The hub is a Cisco ASA (really, it eventually
should be dual hub, but wait until I get one working before I
worry about that) and one of the spokes is a SRX (10.1).
I can get a single tunnel up between the SRX and
10 matches
Mail list logo