KR> test new list

Yep On Feb 24, 2013 4:07 PM, "Larry&Sallie Flesner" wrote: > > > checking to see if I'm hooked up. > > > __**_ > Search the KRnet Archives at > http://tugantek.com/**archmailv2-kr/search > . > To UNsubscribe fr

KR> Pre-Flight Preparations

So far have 2.8 hours on the Hobbs for ground runs. Fixed the alternator: loose spade lug on the regulator field spade; squeezed the lug just a little tighter and re-installed. Fixed the connector on #4 spark plug wire: Poor crimp from the factory did not grip the outer insulation at the spark p

KR> brake cylinder manufacturer?

OZ wrote: > By the way, Mark, by using the wrong parts on the brakes on my Piet, I > found that some O-ring materials aren't happy with brake fluid. I realize > that aviation (red) brake fluid isn't the same as DOT automotive fluid, > but here's a reference that might help in general... Yep,

KR> KR2 Project

At 01:26 PM 2/24/2013, you wrote: >Just making sure no one in the group is interested in my project >14 inch longer KR2 Boat ,tail feathers,turtle back, front cowl >Wing attach fittings , Canopy and frame,Dans wing skins untouched in the >crate. >Asking 3200. ++

KR> new member

Test

KR> test new list

checking to see if I'm hooked up.

KR> brake cylinder manufacturer, Enginetics brake

Three Cheers for the ability of the new list's to include pictures (less than 100kb). Well done Mark Langford, Thank You! Mike Carter Freeland, Mi -Original Message- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Mark Langford Sent: Sunday, February 24, 2013 12:14 PM

KR> KR2 Project

Just making sure no one in the group is interested in my project 14 inch longer KR2 Boat ,tail feathers,turtle back, front cowl Wing attach fittings , Canopr and frame,Dans wing skins untouched in the crate. Asking 3200. margiandrick at gmail.com thanks Rick Armstrong PH 513-258-1730 Lv Messag

KR> post

KR> brake cylinder manufacturer?

Oscar is right. Be careful about what you put in your brake systems. Locally, we're lucky to have a local supplier of hydraulic fittings who is also a pilot. He is very careful about what he sells, and is very knowledgeable. His O rings meet aviation specs for brakes. Many pilots go to him

KR> brake cylinder manufacturer?

By the way, Mark, by using the wrong parts on the brakes on my Piet, I found that some O-ring materials aren't happy with brake fluid. I realize that aviation (red) brake fluid isn't the same as DOT automotive fluid, but here's a reference that might help in general: http://www.efunda.com/glo

KR> brake cylinder manufacturer, Enginetics brake

n out stuff like new again. I highly recommend it... Mark Langford ML at N56ML.com website at http://www.N56ML.com -- next part -- A non-text attachment was scrubbed... Name: brake_caliper.jpg Type: image/jpeg Size: 71043 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20130224/9cf5575e/attachment.jpg>

KR> post

test Eric Pitts Terre Haute, Ind. "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, body thoroughly used up, totally worn out and screaming "WOO HOO what a

KR> test

KR> test no message

KR> workshop #2

All I am looking for dates in April to hold another wing building workshop.? If your interested please email me and give me you preference for dates. Thanks Craig