Brian Kraut wrote:
> Can anyone tell me if a Corvair fits in the normal
> Rand cowl or should I sell the cowl and start from scratch?
There might be something helpful at
http://home.hiwaay.net/~langford/corvair/mount_fit.html or
http://home.hiwaay.net/~langford/cowling.html .
Mark Langford, Hun
, 2004 9:24 PM
To: KRnet
Subject: Re: KR> Engine and cowling
Brian Kraut wrote:
> Can anyone tell me if a Corvair fits in the normal
> Rand cowl or should I sell the cowl and start from scratch?
There might be something helpful at
http://home.hiwaay.net/~langford/corvair/mount_fit.htm
Brian Kraut wrote:
> Did you come up with some clever way of getting a bent spar into
> the spar holes with the plywood already installed or would you put in the
> spar and then ply the sides?
I never thought of that, but that wouldn't stop me from doing it. I'd
probably cut a big enough slot ou
Can anyone tell me if a Corvair fits in the
> normal
> Rand cowl or should I sell the cowl and start from scratch?
>
> Brian Kraut
Brian- I have mine just about finished fitting. The corvair fits in the
cowl fine. I did not mill the intakes off so I will have the bumps on
top. I also used Mark
[mailto:krnet-bounces+brian.kraut=engalt@mylist.net]On Behalf Of
Joseph H Horton
Sent: Friday, May 14, 2004 8:31 PM
To: kr...@mylist.net
Subject: Re: KR> Engine and cowling
Can anyone tell me if a Corvair fits in the
> normal
> Rand cowl or should I sell the cowl and start from scratch?
>
&
sure was easy!
John Bouyea
KR2 - hanging the engine accessories
KR2S - boat hanging from the rafters
john_0...@bouyea.net
www.bouyea.net
From: "Brian Kraut"
Subject: RE: KR> Engine and cowling
I was thinking that I could put the two cowl halves together, coat the
inside with mold r
ssage-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of John Bouyea
Sent: Saturday, May 15, 2004 12:28 AM
To: KRNet
Subject: RE: KR> Engine and cowling
Hi Brian,
I laid-up glass over the outside of an assembled cowl and made a female
mold. The resulting parts l
Just went to see William Wynn today and flew back with a Corvair core in the
back of a Warrior. I guess my engine choice is made!
I have a Rand 2S cowling, but the engine is a little too much disassembled
to see if it will fit. Can anyone tell me if a Corvair fits in the normal
Rand cowl or shou
8 matches
Mail list logo