remove cburst 1
thanks!
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit
ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0
Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0)
rate 608617bps 548pps backlog 40p
lended: 42098 borrowed: 0 giants: 0
Martin Devera ([EMAIL PROTECTED]) wrote:
remove cburst 1
thanks!
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit
ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0
Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0)
rate 608617bps 548pps
Hello again all,
Question:
I have a number of users, who need to be shaped at different rates. My
question is this:
Is there a way that I can shape both *inbound* and *outbound* traffic to
not exceed a single threshold, ie. they can get x kbps traffic in or x
kbps out, but no more than x kbps
Udp forwarding mostly cannnot be controled.
you can drop udp packets but server will not stop sending then to you
anyway.
(of course this depends on server software)
tcp can be controled so do not have this problem
- Original Message -
From: Ibrahim Cherri [EMAIL PROTECTED]
To: [EMAIL
I dont know any complete failower sript suitable
for all situations
I was making one , but since my setup became to
complex it is not possible to reconfigure everything so easily.
if you need only what you said then it should be
possible to use this scrip for you.
- Original Message
Hi folks,
So, I have a pretty simple setup - a linux router machine running as a
firewall/router for a small neighborhood LAN (approx 20 machines). I also
have squid running on the box in non-transparent mode, and also I have set
up NAT for TCP/UDP ports above 1024 for all clients and
