All,
Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is
booting of an IDE hard drive? It is booting in a DOS partition and runs in
RAM
Thanks in advance for any help
Peter
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://list
> Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is
> booting of an IDE hard drive? It is booting in a DOS partition and runs in
> RAM
Yes. The /linuxrc script will look for the pkgpath.cfg and lrpkg.cfg files
on your boot= device (probably your HDD).
Charles Steinkuehler
h
--- Original Message -
From: "Charles Steinkuehler" <[EMAIL PROTECTED]>
To: "Peter Kanatselis" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Friday, March 08, 2002 11:21 AM
Subject: Re: [Leaf-user] Dachstein LRP
> > Can I use the pkgpath.cfg and lrp
> Thanks Charles, I tried it but it failed. What if anything remains in the
> syslinux.cfg file? Do you include the "LRP=" and "PKGPATH=" in the new
file?
> Do you leave them blank in the old one?
You might want to see the CD-ROM readme file...it goes over the use of these
settings in a bit more
I am trying to make the Dachstein LRP to work as a firewall at home.
The problem is that it does not use my ISP gateway, i.e. I am not possiblet
o reach anything beyond the gateway.
However, if I use the Eigerstein Static LRP, which have the same setup it
works fine.
Netstat shows 3 entry in the
> I am trying to make the Dachstein LRP to work as a firewall at home.
> The problem is that it does not use my ISP gateway, i.e. I am not
possiblet
> o reach anything beyond the gateway.
> However, if I use the Eigerstein Static LRP, which have the same setup it
> works fine.
>
> Netstat shows 3
Greetings all!
I'm trying to set up LRP using the dachstein image on a 486 with a serial
port modem and diald. I have almost everything configured and apparently
working except the modem. I try to communicate with it through /dev/ttyS0
(it is COM1), but all that I get is the following error:
c
Mark Lubratt wrote:
Greetings all!
I'm trying to set up LRP using the dachstein image on a 486 with a serial
port modem and diald. I have almost everything configured and
apparently
working except the modem. I try to communicate with it through
/dev/ttyS0
(it is COM1), but all that I get is t
