On Fri, Oct 24, 2014 at 03:33:14AM +0100, Robert Bragg wrote:
> On Thu, Oct 23, 2014 at 8:47 AM, Chris Wilson
> wrote:
> > On Wed, Oct 22, 2014 at 04:28:51PM +0100, Robert Bragg wrote:
> >> + /* XXX: Not sure that this is really acceptable...
> >> + *
> >> + * i915_gem_context.c cur
Amend the i2c at91 pin controller to optionally take a pin control
handle and set the state of the pins to:
- "default" on boot, resume and before performing an transfer
- "sleep" on suspend()
This should make it possible to optimize energy usage for the pins
both for the suspend/resume cycle
Si
Signed-off-by: Wenyou Yang
---
drivers/i2c/busses/i2c-at91.c | 26 ++
1 file changed, 26 insertions(+)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index a25fb5e..6a84a2a 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i
Drivers should put the device into low power states proactively whenever the
device is not in use. Thus implement support for runtime PM and use the
autosuspend feature to make sure that we can still perform well in case we see
lots of i2c traffic within short period of time.
Signed-off-by: Wenyou
Hi Wolfram,
The patches is to add the PM functions support for the at91 i2c controller.
It is based on the i2c/for-next branch of
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git.
Best Regards,
Wenyou Yang
--
Change log:
v2.0
According to the advice from Kevin Hilman,
1./ Wrap
Sorry, I missed Marc's patch while working on this version and that did
address something I missed in my version. I'd like to replace 4/7 with
this one.
Joe.C
==
Add support to use gic as a parent for stacked irq domain.
Signed-off-by: Yingjoe Chen
---
This patch shrink page-pool by page unit.
Signed-off-by: Gioh Kim
---
drivers/staging/android/ion/ion_page_pool.c |5 +++--
drivers/staging/android/ion/ion_system_heap.c |7 +--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/android/ion/ion_page_pool
page unit.
2. Patch 2/3: enable debugfs to shrink page directly
This patch enables debugfs to specify shrink amount.
3. Patch 3/3: limit pool size
This patch specifies pool size limit.
This patchset is based on linux-next-20141023.
Gioh Kim (3):
staging: ion: shrink page-pool by page unit
This patch limits pool size by page unit.
Signed-off-by: Gioh Kim
---
drivers/staging/android/ion/Kconfig |4
drivers/staging/android/ion/ion_page_pool.c | 26 --
2 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/android/i
This patch creates debugfs files, /sys/kernel/debug/ion/heaps/system_shrink,
to shrink pool or get pool size.
Reading the file returns pool size and writing occurs to shrink pool.
Signed-off-by: Gioh Kim
---
drivers/staging/android/ion/ion.c | 31 ---
1 file changed
Looks good Russ, just a minor fix:
- /* Attempt to set Vendor ID to 0 */
- eeprom_data[1] = 0;
-
- /* Calculate new checksum to avoid bricking devices */
- checksum = ftdi_checksum(eeprom_data, eeprom_size);
-
- /* Verify EEPROM programming behavior/nonbehavior */
-
From: "Kweh, Hock Leong"
Introducing a kernel module to expose user helper interface for
user to upload capsule binaries. This module leverage the
request_firmware_nowait() to expose an interface to user.
Example steps to load the capsule binary:
1.) echo 1 > /sys/class/firmware/efi-capsule-file
From: "Kweh, Hock Leong"
When using request_firmware_nowait() with FW_ACTION_NOHOTPLUG param to
expose user helper interface, if the user do not react immediately, after
120 seconds there will be a hung task warning message dumped as below:
[ 3000.784235] INFO: task kworker/0:0:8259 blocked for
From: "Kweh, Hock Leong"
Besides aborting through user helper interface, a new API
request_firmware_abort() allows kernel driver module to abort the
request_firmware() / request_firmware_nowait() when they are no
longer needed. It is useful for cancelling an outstanding firmware
load if initiated
From: "Kweh, Hock Leong"
Hi Guys,
This patchset is created on top of "efi: Capsule update support" patch:
http://permalink.gmane.org/gmane.linux.kernel.efi/4837
It leverages the request_firmware_nowait() to expose the user helper
interface for user to upload the capsule binary and calling the
e
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
From: Guenter Roeck
Date: Thu, 23 Oct 2014 22:40:59 -0700
> I see two options for that:
>
> - Add
> select HWMON
> to the NET_DSA Kconfig entry.
> Example is Broadcom TIGON3 driver.
>
> - Add a DSA_HWMON Kconfig entry to define the dependencies and
> to let the user select if the fu
On 10/24/2014 05:52 AM, Florian Fainelli wrote:
Le 23/10/2014 22:40, Guenter Roeck a écrit :
On 10/23/2014 10:03 PM, David Miller wrote:
From: Guenter Roeck
Date: Wed, 22 Oct 2014 22:06:41 -0700
On 10/22/2014 09:37 PM, Florian Fainelli wrote:
2014-10-22 21:03 GMT-07:00 Guenter Roeck :
Some
On 10/23/2014 06:29 PM, Soren Brinkmann wrote:
> Signed-off-by: Soren Brinkmann
> ---
> v2:
> - I removed the additional 'F' entries
>
> MAINTAINERS | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0484f2c526f0..8b495a27 100644
> --- a/MAINTAINERS
On Thu, 23 Oct 2014 13:45:13 +0300, Adrian Hunter wrote:
> This patch introduces an abstraction for exporting sample
> data in a database-friendly way. The abstraction does not
> implement the actual output. A subsequent patch takes this
> facility into use for extending the script interface.
>
>
Hi, Wanpeng,
the commit commentary confuses, I'm agree. Really it's just a cleanup.
On Пт, 2014-10-24 at 07:27 +0800, Wanpeng Li wrote:
> Hi Kirill,
> 8/6/14, 4:06 PM, Kirill Tkhai:
> > (sched_entity::on_rq == 1) does not guarantee the task is pickable;
> > changes on throttled cfs_rq must not le
Le 23/10/2014 22:40, Guenter Roeck a écrit :
On 10/23/2014 10:03 PM, David Miller wrote:
From: Guenter Roeck
Date: Wed, 22 Oct 2014 22:06:41 -0700
On 10/22/2014 09:37 PM, Florian Fainelli wrote:
2014-10-22 21:03 GMT-07:00 Guenter Roeck :
Some Marvell switches provide chip temperature data.
On 10/23/2014 10:03 PM, David Miller wrote:
From: Guenter Roeck
Date: Wed, 22 Oct 2014 22:06:41 -0700
On 10/22/2014 09:37 PM, Florian Fainelli wrote:
2014-10-22 21:03 GMT-07:00 Guenter Roeck :
Some Marvell switches provide chip temperature data.
Add support for reporting it to the dsa infras
On Thu, 23 Oct 2014 13:45:12 +0300, Adrian Hunter wrote:
> +static void thread_stack__pop(struct thread_stack *ts, u64 ret_addr)
> +{
> + if (!ts->cnt)
> + return;
> +
> + if (ts->stack[ts->cnt - 1].ret_addr == ret_addr) {
> + ts->cnt -= 1;
> + } else {
> +
From: "Joe.C"
We support more MediaTek SoCs now, update the description.
Signed-off-by: Joe.C
---
arch/arm/mach-mediatek/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mediatek/Kconfig
b/arch/arm/mach-mediatek/Kconfig
index 2c043a2..f73f588 100644
When big files (over 64kbytes) are sent with sendfile(), they are sent by blocks
of 64kbytes. In that case, the target must be informed that the current block is
not the last one, otherwise it might take wrong actions.
The issue was observed while sending a file to an AF_ALG socket for hashing. The
On Fri, Oct 24, 2014 at 11:27:49AM +0900, Minchan Kim wrote:
> Hi Joonsoo,
>
> I know you spend much effort for investigate/fix this subtle problem.
> So, you should be hero.
>
> Thanks for really nice work!
Hello,
Thanks. :)
> >
> > Joonsoo Kim (4):
> > mm/page_alloc: fix incorrect isolatio
On Thu, Oct 23, 2014 at 8:23 PM, Josh Triplett wrote:
> On Thu, Oct 23, 2014 at 06:41:08PM -0700, Alexei Starovoitov wrote:
>> introduce two configs:
>> - hidden CONFIG_BPF to select eBPF interpreter that classic socket filters
>> depend on
>> - visible CONFIG_BPF_SYSCALL (default off) that trac
On Thu, Oct 16, 2014 at 11:35:51AM +0800, Hui Zhu wrote:
> If page alloc function __rmqueue try to get pages from MIGRATE_MOVABLE and
> conditions (cma_alloc_counter, cma_aggressive_free_min, cma_alloc_counter)
> allow, MIGRATE_CMA will be allocated as MIGRATE_MOVABLE first.
>
> Signed-off-by: Hui
(CCs more eyeballs)
On Thu, 2014-10-23 at 15:28 -0400, Brian Silverman wrote:
> Here's the test code:
Which took a 2 socket 28 core box (NOPREEMPT) out in short order. With
patchlet applied, looks like it'll stay up (37 minutes and counting),
I'll squeak if it explodes.
Tested-by: Mike Galbrai
On Thu, Oct 16, 2014 at 11:35:47AM +0800, Hui Zhu wrote:
> In fallbacks of page_alloc.c, MIGRATE_CMA is the fallback of
> MIGRATE_MOVABLE.
> MIGRATE_MOVABLE will use MIGRATE_CMA when it doesn't have a page in
> order that Linux kernel want.
>
> If a system that has a lot of user space program is r
On Thu, 23 Oct 2014 13:45:11 +0300, Adrian Hunter wrote:
> Add a function to deliver synthesized events from
> within a session.
>
> Signed-off-by: Adrian Hunter
> ---
> tools/perf/util/session.c | 14 ++
> tools/perf/util/session.h | 5 +
> 2 files changed, 19 insertions(+)
>
>
On Thu, 23 Oct 2014 13:45:10 +0300, Adrian Hunter wrote:
> perf list only lists PMUs with events. Add a
> flag to cause a PMU to be also listed separately.
>
> Signed-off-by: Adrian Hunter
> ---
> tools/perf/util/pmu.c | 13 +++--
> tools/perf/util/pmu.h | 1 +
> 2 files changed, 12 ins
On Thu, 23 Oct 2014 18:08:17 -0300, Arnaldo Carvalho de Melo wrote:
> Em Thu, Oct 23, 2014 at 01:45:09PM +0300, Adrian Hunter escreveu:
>> Add an index of the event identifiers.
>>
>> This is needed to queue Instruction
>> Trace samples according to the mmap
>> buffer from which they were recorded
this change add CONFIG_HAVE_ARCH_BITREVERSE config option,
so that we can use arm/arm64 rbit instruction to do bitrev operation
by hardware.
Signed-off-by: Yalin Wang
---
arch/arm/Kconfig| 1 +
arch/arm/include/asm/bitrev.h | 21 +
arch/arm64/Kconfig
From: Guenter Roeck
Date: Wed, 22 Oct 2014 22:06:41 -0700
> On 10/22/2014 09:37 PM, Florian Fainelli wrote:
>> 2014-10-22 21:03 GMT-07:00 Guenter Roeck :
>>> Some Marvell switches provide chip temperature data.
>>> Add support for reporting it to the dsa infrastructure.
>>>
>>> Signed-off-by: Gue
On Tue, Oct 21, 2014 at 08:10:32PM -0700, Rom Lemarchand wrote:
> We would also like to make kernel-t...@android.com the maintainer of
> the whole android directory.
Mailing lists can't be a maintainer, but you could add it as a private
list in the MAINTAINERS file.
regards,
dan carpenter
--
To
On Thu, Oct 23, 2014 at 09:18:29AM -0500, Christoph Lameter wrote:
> On Thu, 23 Oct 2014, Joonsoo Kim wrote:
>
> > Preemption disable during very short code would cause large problem for RT?
>
> This is the hotpath and preempt enable/disable adds a significant number
> of cycles.
>
> > And, if p
A minor detail.
> [PATCH] sparc64: Fix register corruption in top-most kernel stack frame
> during boot.
>
> - callstart_kernel
> + call start_early_boot
Maybe add a comment about stack use - as per your nice patch description.
> +void __init start_early_boot(void)
This will likel
First of all this patch does too many things at once. Collapsing files
and deleting them needs to be done in separate patches from adding them.
There is the "one thing per patch" and each one of those is a separate
thing.
On Thu, Oct 23, 2014 at 05:12:10PM -0500, Eric Rost wrote:
> +int skein256_
Paul E. McKenney wrote:
>On Fri, Oct 24, 2014 at 12:45:40AM +0300, Yanko Kaneti wrote:
>>
>> On Thu, 2014-10-23 at 13:05 -0700, Paul E. McKenney wrote:
>> > On Thu, Oct 23, 2014 at 10:51:59PM +0300, Yanko Kaneti wrote:
>> > > On Thu-10/23/14-2014 08:33, Paul E. McKenney wrote:
>> > > > On Thu, O
Chris,
On Tue, Oct 21, 2014 at 4:25 PM, Chris Zhong wrote:
> +static inline void rk3288_copy_data_to_sram(void)
> +{
> + u32 resume_code_size = (u32)&rkpm_bootdata_cpu_code -
> + (u32)rockchip_slp_cpu_resume + 4;
> +
> + /* save root sram data in ddr mem *
From: Geert Uytterhoeven
Date: Tue, 21 Oct 2014 19:53:11 +0200
> As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in
> hwreg_present()/hwreg_write()"), this is no longer needed.
>
> Signed-off-by: Geert Uytterhoeven
Applied.
--
To unsubscribe from this list: send the line "unsu
From: Geert Uytterhoeven
Date: Tue, 21 Oct 2014 19:53:57 +0200
> As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in
> hwreg_present()/hwreg_write()"), this is no longer needed.
>
> Signed-off-by: Geert Uytterhoeven
Applied.
--
To unsubscribe from this list: send the line "unsu
From: Rasmus Villemoes
Date: Tue, 21 Oct 2014 16:51:43 +0200
> Both image_data and typhoon_fw->data are const u8*, so the cast to u8*
> is unnecessary and confusing.
>
> Signed-off-by: Rasmus Villemoes
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the b
I, Liliane authenticate this email to you. You can read about me on:
fr.wikipedia.org/wiki/Liliane_Bettencourt I intend to give to you a portion of
my Net-worth which I have been banking. Click reply for confirmation and more
details.
---
This email is free from viruses and malware because avas
On Thu, Oct 9, 2014 at 12:04 AM, pang.xunlei wrote:
> The clocksource mult-adjustment threshold is [mult-maxadj, mult+maxadj],
> timekeeping_adjust() only deals with the upper threshold, but misses the
> lower threshold.
>
> This patch adds the lower threshold judging condition.
>
> Signed-off-by:
On Wed, Oct 22, 2014 at 5:37 AM, Xunlei Pang wrote:
> The mult memember of struct clocksource should always be a large u32 number
> when calculated through
> __clocksource_updatefreq_scale(). The value of (cs->mult+cs->maxadj) may
> have a chance to reach very
> near 0x, so it may overflow
From: Viet Nga Dao
Additional code to m88e1145_config_init function to allow the driver to
support SGMII mode.
Signed-off-by: Viet Nga Dao
---
drivers/net/phy/marvell.c | 19 +++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drive
From: Kenjiro Nakayama
Date: Mon, 20 Oct 2014 18:15:50 +0900
> Remove trailing whitespace in tcp.h icmp.c syncookies.c
>
> Signed-off-by: Kenjiro Nakayama
Applied
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
Mo
Ping?
On 10/20/2014 05:59 AM, Juergen Gross wrote:
Hi x86 maintainers,
any reason you seem to ignore this patch series? I think I've replied
to all open issues and sent the patches more than one month ago. Each
patch has a "Reviewed-by". Is there something else missing?
Juergen
On 10/13/2014
On Wed, Oct 22, 2014 at 07:01:27PM +0200, Nicolas Ferre wrote:
> Arnd, Olof, Kevin,
>
> This is my first batch of fixes for 3.18.
> The power/reset driver part is there because it was introduced through arm-soc
> and it seems that it's better to continue like that.
> The MAINTAINERS entry is bette
Hi all:
In function nf_nat_setup_info, we need to get the current tuple
which is supposed to send to destination.
If we haven't done any NAT (SNAT or DNAT) for the tuple, then the
current tuple is equal to original tuple,
otherwise, we should get current tuple by invoking
nf_ct_inv
On 10/23/2014 07:03 PM, Peter Zijlstra wrote:
> On Thu, Oct 23, 2014 at 06:14:45PM +0800, Lai Jiangshan wrote:
>>
>>>
>>> +struct vm_area_struct *find_vma_srcu(struct mm_struct *mm, unsigned long
>>> addr)
>>> +{
>>> + struct vm_area_struct *vma;
>>> + unsigned int seq;
>>> +
>>> + WARN_ON
On 10/23/2014 11:55 AM, Florian Fainelli wrote:
On 10/23/2014 11:41 AM, Chris Healy wrote:
Hi Guenter,
I do not believe it is possible to know if an EEPROM is attached or not.
If we cannot do this, how about a DT/platform data set of properties
that describes the EEPROM when present?
Yes, I
From: Benjamin Herrenschmidt
Date: Fri, 24 Oct 2014 10:40:35 +1100
> Another option would be to make the generic code use something defined
> by the arch to decide whether to use speculative get or
> not. I like the idea of keeping the bulk of that code generic...
Me too. We could have inlines
On Fri, 2014-10-24 at 13:55 +1100, James Morris wrote:
> On Thu, 23 Oct 2014, Dmitry Kasatkin wrote:
>
> > ima_inode_setxattr() can be called with no value. Function does not
> > check the length so that following command can be used to produce
> > kernel oops: setfattr -n security.ima FOO. This
On 2014/10/24 11:33, hujianyang wrote:
>
>> @@ -1798,15 +1803,18 @@ int ubi_thread(void *u)
>> int failures = 0;
>> struct ubi_device *ubi = u;
>>
>> -ubi_msg("background thread \"%s\" started, PID %d",
>> +ubi_msg(ubi, "background thread \"%s\" started, PID %d",
>>
Hi Tanya,
When I was trying to push this patch to my product, I reviewed this patch
and found some small problems. I wish it's not too late to report these.
The patch I get from linux-ubifs.git is amended a bit by Artem. I'd like to
quote your V5 patch for simplification. Some line numbers may mi
From: Davidlohr Bueso
Update our documentation as of fix 76835b0ebf8 (futex: Ensure
get_futex_key_refs() always implies a barrier). Explicitly
state that we don't do key referencing for private futexes.
Signed-off-by: Davidlohr Bueso
---
kernel/futex.c | 14 ++
1 file changed, 10 i
On Thu, Oct 23, 2014 at 06:41:08PM -0700, Alexei Starovoitov wrote:
> introduce two configs:
> - hidden CONFIG_BPF to select eBPF interpreter that classic socket filters
> depend on
> - visible CONFIG_BPF_SYSCALL (default off) that tracing and sockets can use
>
> that solves several problems:
>
On Fri, Oct 24, 2014 at 03:20:55AM +0100, Al Viro wrote:
> Why the hell do you hold ->i_mutex across the entire opening of underlying
> directory? All you need is to serialize one assignment; the side that loses
> the race will simply fput() what it opened...
>
> Oh, well - that goes under "weird
Dmitry,
在 2014/10/24 10:32, Dmitry Torokhov 写道:
On Fri, Oct 24, 2014 at 10:06:43AM +0800, Caesar Wang wrote:
在 2014/10/24 9:37, Dmitry Torokhov 写道:
On October 23, 2014 6:08:52 PM PDT, Caesar Wang
wrote:
Dmitry,
在 2014/10/24 8:46, Dmitry Torokhov 写道:
Hi Caesar,
On Thu, Oct 23, 2014 at 05:
Hi Peter,
Thanks for your patch.
Btw, do you use "git send-email" command to send the patch?
On 10/22/2014 11:13 PM, Peter Rosin wrote:
From 86be84c4de4e7b21cfda9656a02a902c543210af Mon Sep 17 00:00:00 2001
From: Peter Rosin
Date: Wed, 22 Oct 2014 16:45:29 +0200
Subject: [PATCH v2] ASoC:
From: Viet Nga Dao
Additional code to m88e1145_config_init function to allow the driver to
support SGMII mode.
Signed-off-by: Viet Nga Dao
---
drivers/net/phy/marvell.c | 19 +++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drive
On Thu, Oct 23, 2014 at 10:39:45AM +0200, Vlastimil Babka wrote:
> On 10/23/2014 10:15 AM, Joonsoo Kim wrote:
> > On Tue, Oct 14, 2014 at 01:53:44PM -0700, a...@linux-foundation.org wrote:
> >>
> >> The patch titled
> >> Subject: mm/compaction.c: avoid premature range skip in
> >> isolate_mig
Yes, I will look at this tomorrow.
For the record, the calling convention is that eax, edx, ecx are clobbered, and
used for the three first arguments in that order. eax, edx are used for the
return value(s).
The exception is for __asmlinkage functions where all arguments are passed on
the stac
On Thu, 23 Oct 2014, Dmitry Kasatkin wrote:
> ima_inode_setxattr() can be called with no value. Function does not
> check the length so that following command can be used to produce
> kernel oops: setfattr -n security.ima FOO. This patch fixes it.
I'd like to see more review/acks on this before s
On Thu, Oct 23, 2014 at 05:33:47PM +0300, Laurent Pinchart wrote:
> Commit 95b0e655f914 ("ARM: mm: don't limit default CMA region only to
> low memory") extended CMA memory reservation to allow usage of high
> memory. It relied on commit f7426b983a6a ("mm: cma: adjust address limit
> to avoid hitti
On Fri, Oct 24, 2014 at 10:02:49AM +0800, Weijie Yang wrote:
> On Fri, Oct 24, 2014 at 7:42 AM, Laurent Pinchart
> wrote:
> > Hi Michal,
> >
> > On Thursday 23 October 2014 18:53:36 Michal Nazarewicz wrote:
> >> On Thu, Oct 23 2014, Laurent Pinchart wrote:
> >> > If activation of the CMA area fail
On Wed, Oct 22, 2014 at 05:17:06PM +0200, Geert Uytterhoeven wrote:
> On Wed, Oct 22, 2014 at 4:58 PM, Laurent Pinchart
> wrote:
> > On Wednesday 22 October 2014 11:38:29 Geert Uytterhoeven wrote:
> >> ch0 will be used for clock events and for periodic clock events,
> >> ch1 will be used as clock
On Fri, Oct 24, 2014 at 10:56 AM, Arnaldo Carvalho de Melo
wrote:
> Em Fri, Oct 24, 2014 at 09:44:17AM +0900, Namhyung Kim escreveu:
>> On Thu, 23 Oct 2014 20:35:42 -0300, Arnaldo Carvalho de Melo wrote:
>> > I'll push later and will drop you a note, so that you can, please, check
>> > if the end
On Wed, Oct 22, 2014 at 05:59:25PM +0300, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Wednesday 22 October 2014 11:38:27 Geert Uytterhoeven wrote:
> > Compared to the r8a7779, the r8a7740 lacks the input capture register,
> > which is not used by the driver (the curren
On Thu, Oct 23, 2014 at 8:47 AM, Chris Wilson wrote:
> On Wed, Oct 22, 2014 at 04:28:51PM +0100, Robert Bragg wrote:
>> + /* XXX: Not sure that this is really acceptable...
>> + *
>> + * i915_gem_context.c currently owns pinning/unpinning legacy
>> + * context buffers and althou
On Fri, Oct 24, 2014 at 10:06:43AM +0800, Caesar Wang wrote:
>
> 在 2014/10/24 9:37, Dmitry Torokhov 写道:
> >On October 23, 2014 6:08:52 PM PDT, Caesar Wang
> >wrote:
> >>Dmitry,
> >>
> >>在 2014/10/24 8:46, Dmitry Torokhov 写道:
> >>>Hi Caesar,
> >>>
> >>>On Thu, Oct 23, 2014 at 05:40:06PM +0800, Ca
Hi Joonsoo,
I know you spend much effort for investigate/fix this subtle problem.
So, you should be hero.
Thanks for really nice work!
On Thu, Oct 23, 2014 at 05:10:17PM +0900, Joonsoo Kim wrote:
> Changes from v3 to v4
> * Patch 1: Add code comment on nr_isolate_pageblock on struct zone (Naoya)
On Fri, Oct 24, 2014 at 01:25:39AM +0200, Miklos Szeredi wrote:
> Linus,
>
> Please pull
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git overlayfs.v25
>
> Plenty of bugs fixed relative to the previous version, thanks to Al Viro's
> review and is now officially be BugFree(TM)
Dmitry,
在 2014/10/24 8:48, Dmitry Torokhov 写道:
Hi Caesar,
On Thu, Oct 23, 2014 at 05:40:05PM +0800, Caesar Wang wrote:
This patch changes a dtsi file to contain the thermal data
on RK3288 and later SoCs. This data will
enable a thermal shutdown over 125C.
Signed-off-by: Caesar Wang
---
arc
On Wed, Oct 22, 2014 at 06:00:19PM +0300, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Wednesday 22 October 2014 11:26:18 Geert Uytterhoeven wrote:
> > r7s72100 is a member of the RZ family, not of the R-Car family
> >
> > Signed-off-by: Geert Uytterhoeven
>
> Acked-
Inlines the macro definition rotl_64 to avoid bugs.
Signed-off-by: Eric Rost
---
drivers/staging/skein/skein_base.h | 9 +
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/skein/skein_base.h
b/drivers/staging/skein/skein_base.h
index 9f10af9..769bcb4 100644
On Fri, Oct 24, 2014 at 12:12 AM, Michael S. Tsirkin wrote:
> If a device appears while module is being removed,
> driver will get a callback after we've given up
> on the major number.
>
> In theory this means this major number can get reused
> by something else, resulting in a conflict.
Yes, th
Adds loadable module support for the Skein Hashing Algorithm.
Signed-off-by: Eric Rost
---
drivers/staging/skein/Kconfig | 2 +-
drivers/staging/skein/skein_generic.c | 19 ++-
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/skein/Kconfig
On Thu, Oct 23, 2014 at 6:39 PM, PERIER Romain wrote:
> Hi Peter,
>
> 2014-10-23 10:12 GMT+02:00 Peter De Schrijver :
>> This breaks DT ABI stability right? An existing device tree using
>> ti,system-power-controller won't work anymore after this patch right? I
>> don't think that's acceptable.
Adds CryptoAPI support for skein256, skein512, and skein1024
algorithms. Also collapses threefish algorithm into skein.o and removes
Kconfig option for Threefish.
Signed-off-by: Eric Rost
---
drivers/staging/skein/Kconfig | 22 +-
drivers/staging/skein/Makefile| 13 +-
drivers/
Adds CryptoAPI and Loadable Module support to the Skein Hash Algorithm.
Also inlines the rotl_64 macro.
Eric Rost (3):
staging: skein: Adds CryptoAPI Support
staging: skein: Adds Loadable Module Support
staging: skein: Inlines rotl_64
drivers/staging/skein/Kconfig | 24 +-
drivers
在 2014/10/24 9:37, Dmitry Torokhov 写道:
On October 23, 2014 6:08:52 PM PDT, Caesar Wang
wrote:
Dmitry,
在 2014/10/24 8:46, Dmitry Torokhov 写道:
Hi Caesar,
On Thu, Oct 23, 2014 at 05:40:06PM +0800, Caesar Wang wrote:
This patch is depend on rk3288-thermal.dtsi,or
it will compile error.
If th
On Fri, Oct 24, 2014 at 7:42 AM, Laurent Pinchart
wrote:
> Hi Michal,
>
> On Thursday 23 October 2014 18:53:36 Michal Nazarewicz wrote:
>> On Thu, Oct 23 2014, Laurent Pinchart wrote:
>> > If activation of the CMA area fails its mutex won't be initialized,
>> > leading to an oops at allocation tim
Hi Arnaldo,
A have posted a v3 patch based on your git repository. Please refer to:
https://lkml.org/lkml/2014/10/23/711 .
Thanks.
On 2014/10/24 7:53, Arnaldo Carvalho de Melo wrote:
> Em Fri, Oct 24, 2014 at 08:26:13AM +0900, Namhyung Kim escreveu:
>> On Wed, 22 Oct 2014 15:40:14 +0800, Wang
Em Fri, Oct 24, 2014 at 09:44:17AM +0900, Namhyung Kim escreveu:
> On Thu, 23 Oct 2014 20:35:42 -0300, Arnaldo Carvalho de Melo wrote:
> > I'll push later and will drop you a note, so that you can, please, check
> > if the end result is sane.
>
> Thank you!
It should be on my perf/core branch by
Em Fri, Oct 24, 2014 at 09:45:26AM +0800, Wang Nan escreveu:
> After kernel 3.7 (commit b4b8f770eb10a1bccaf8aa0ec1956e2dd7ed1e0a),
> /proc/cpuinfo replaces 'Processor' to 'model name'. This patch makes
> CPUINFO_PROC to an array and provides two choices for ARM, makes it
> compatible for different
After kernel 3.7 (commit b4b8f770eb10a1bccaf8aa0ec1956e2dd7ed1e0a),
/proc/cpuinfo replaces 'Processor' to 'model name'. This patch makes
CPUINFO_PROC to an array and provides two choices for ARM, makes it
compatible for different kernel version.
v1 -> v2: minor changes as suggested by Namhyung Kim
introduce two configs:
- hidden CONFIG_BPF to select eBPF interpreter that classic socket filters
depend on
- visible CONFIG_BPF_SYSCALL (default off) that tracing and sockets can use
that solves several problems:
- tracing and others that wish to use eBPF don't need to depend on NET.
They can
On October 23, 2014 6:08:52 PM PDT, Caesar Wang
wrote:
>Dmitry,
>
>在 2014/10/24 8:46, Dmitry Torokhov 写道:
>> Hi Caesar,
>>
>> On Thu, Oct 23, 2014 at 05:40:06PM +0800, Caesar Wang wrote:
>>> This patch is depend on rk3288-thermal.dtsi,or
>>> it will compile error.
>>>
>>> If the temperature over
Add X-Gene platform reboot driver dts node.
Signed-off-by: Feng Kan
---
arch/arm64/boot/dts/apm-storm.dtsi | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi
b/arch/arm64/boot/dts/apm-storm.dtsi
index a80f2fa..9532aa3 100644
--- a/arch/arm64/boo
Sorry, messed up the title will resend
On Thu, Oct 23, 2014 at 6:24 PM, Feng Kan wrote:
> This parch adds the device tree nodes for APM X-Gnene USB host controller.
> Since X-Gene SOC supports maximum 2 USB ports, 2 dts node are added.
>
> Signed-off-by: Bao Truong
> Signed-off-by: Feng Kan
> -
Add the flash controller muxed gpio dts node for APM X-Gene SoC platform.
Signed-off-by: Feng Kan
---
arch/arm64/boot/dts/apm-storm.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi
b/arch/arm64/boot/dts/apm-storm.dtsi
index d84cf33..b2e6068 1006
Add Designware GPIO dts binding to APM X-Gene platform
Signed-off-by: Feng Kan
---
arch/arm64/boot/dts/apm-storm.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi
b/arch/arm64/boot/dts/apm-storm.dtsi
index 9532aa3..d84cf33 100644
--- a/
This patch documents the compatible string for APM X-Gene Potenza CPU's PMU.
Signed-off-by: Vinayak Kale
Signed-off-by: Feng Kan
---
Documentation/devicetree/bindings/arm/pmu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt
b/Documentation/d
This patch adds the PMU device tree node for APM X-Gene Storm SOC.
Signed-off-by: Vinayak Kale
Signed-off-by: Feng Kan
---
arch/arm64/boot/dts/apm-storm.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi
b/arch/arm64/boot/dts/apm-storm.dtsi
index b
This parch adds the device tree nodes for APM X-Gnene USB host controller.
Since X-Gene SOC supports maximum 2 USB ports, 2 dts node are added.
Signed-off-by: Bao Truong
Signed-off-by: Feng Kan
---
arch/arm64/boot/dts/apm-storm.dtsi | 14 ++
1 file changed, 14 insertions(+)
diff --
1 - 100 of 729 matches
Mail list logo
