The function poseidon_fe_release is redundent in fact, I will remove it
in future.
But now I still acked this patch. thanks a lot.
Acked-by: Huang Shijie
From: Márton Németh
When power management is not configured (CONFIG_PM) then some code is no longer
necessary.
This patch will remove the
On Friday 26 February 2010 20:43:19 Hans de Goede wrote:
> Hi,
>
> I'm happy to announce the first (test / beta) release of v4l-utils,
> v4l-utils is the combination of various v4l and dvb utilities which
> used to be part of the v4l-dvb mercurial kernel tree and libv4l.
Is it correct that I only
thanks.
Acked-by: Huang Shijie
From: Márton Németh
Make the local variables and functions static. Some of them are not exported by
their
symbol name but used trough other means. For example a pointer of the operation
structure is passed through a function call.
This will remove the followin
From: Márton Németh
The condition (msg[i].addr == 0xd0) is checked twice the second one
is not necessary.
This will remove the following compiler warning:
az6027.c: In function 'az6027_i2c_xfer':
az6027.c:942: warning: 'index' may be used uninitialized in this function
az6027.c:943: war
Hi Adams,
Hans Verkuil wrote:
> This message is generated daily by a cron job that builds v4l-dvb for
> the kernels and architectures in the list below.
> [...]
>
> Detailed results are available here:
>
> http://www.xs4all.nl/~hverkuil/logs/Sunday.log
> linux-2.6.29.1-i686: WARNINGS
>
> /home/
On Sun, 28 Feb 2010 21:19:25 +0100
Olivier Lorin wrote:
> - General changes for all drivers because of new MI2020 sensor
> driver :
> - add the light source control
> - control value changes only applied after an end of image
> - replace msleep with duration less than 5 ms by a busy loop
>
Hi,
Huang Shijie wrote:
> hi Marton, thanks a lot.
>
>> From: Márton Németh
>>
>> When power management is not configured (CONFIG_PM) then some code is no
>> longer
>> necessary.
>>
>> This patch will remove the following compiler warnings:
>> * pd-dvb.c: In function 'poseidon_fe_release':
>>
Hi All
After rework of the IR subsystem, IR RC no more work in our TV cards.
As I see
call saa7134_probe_i2c_ir,
configure i2c
call i2c_new_device
New i2c device not registred.
The module kbd-i2c-ir loaded after i2c_new_device.
I try to found what happens.
With my best regards, Dmitry.
--
From: Márton Németh
Make the local variables and functions static. Some of them are not exported by
their
symbol name but used trough other means. For example a pointer of the operation
structure is passed through a function call.
This will remove the following sparse warnings (see "make C=1"):
Hi Avl,
Am Samstag, den 20.02.2010, 11:49 + schrieb Avl Jawrowski:
> Hi, sorry for the late.
>
> hermann pitton arcor.de> writes:
>
> > > But I can't see any video.
> > > With Kaffeine I can see the same channels as well.
> >
> > My guess is, kaffeine has a bit more trust in error correcti
hi Marton, thanks a lot.
From: Márton Németh
When power management is not configured (CONFIG_PM) then some code is no longer
necessary.
This patch will remove the following compiler warnings:
* pd-dvb.c: In function 'poseidon_fe_release':
* pd-dvb.c:101: warning: unused variable 'pd'
* p
From: Márton Németh
Make the local variables and functions static. Some of them are not exported by
their
symbol name but used trough other means. For example a pointer of the operation
structure is passed through a function call.
This will remove the following sparse warnings (see "make C=1"
This might seem like a bit of a silly question, but I've been banging
my head on the wall for a while on this.
I need to add a single private control to the saa7115 driver.
However, it's not clear to me exactly how this is supposed to work.
The v4l2-ctl program will always use the extended contro
On Mon, Mar 1, 2010 at 4:58 AM, Andy Walls wrote:
> On Mon, 2010-03-01 at 00:07 +0100, Helmut Auer wrote:
>> Hello,
>>
>> The mantis module is build and working fine with the Skystar2 HD, but it I
>> cannot autodetect it,
>> because modules.pcimap is not filled with the vendor id of the card usin
On Mon, 2010-03-01 at 00:07 +0100, Helmut Auer wrote:
> Hello,
>
> The mantis module is build and working fine with the Skystar2 HD, but it I
> cannot autodetect it,
> because modules.pcimap is not filled with the vendor id of the card using
> this module.
> What's to do to get these ID's ?
> I
On Mon, Mar 1, 2010 at 3:07 AM, Helmut Auer wrote:
> Hello,
>
> The mantis module is build and working fine with the Skystar2 HD, but it I
> cannot autodetect it,
> because modules.pcimap is not filled with the vendor id of the card using
> this module.
> What's to do to get these ID's ?
> In m
Hello,
The mantis module is build and working fine with the Skystar2 HD, but it I
cannot autodetect it,
because modules.pcimap is not filled with the vendor id of the card using this
module.
What's to do to get these ID's ?
In my case its a:
01:08.0 0480: 1822:4e35 (rev 01)
Subsystem:
gspca - gl860: new driver for MI2020 sensor
From: Olivier Lorin
- new MI2020 driver version made from a webcam given to me
- remove all previous flavors of this driver
Priority: normal
Signed-off-by: Olivier Lorin
diff
-rupN ../i/linux/drivers/media/video/gspca/gl860/gl860.c
./linux/drivers
gspca - gl860: updates to prepare the new driver for MI2020 sensor
From: Olivier Lorin
- General changes for all drivers because of new MI2020 sensor driver :
- add the light source control
- control value changes only applied after an end of image
- replace msleep with duration less than
On Sun, 28 Feb 2010 20:18:50 +0100
Antonio Ospite wrote:
> Maybe we could just use
> V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0,
> V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1,
>
> It looks like the code matches the DISABLED state (writing 0 to the
> register). Mosalam?
I don't know
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sun Feb 28 19:00:21 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14319:37581bb7e6f1
gcc version: i686-
On Sun, 28 Feb 2010 19:54:25 +0100
Antonio Ospite wrote:
> JF, the intent here is to cover all the range of values available in
> Auto Exposure mode too, doesn't this make sense to you?
>
> I could set .maximum to 253 to limit the "UI" control precision but
> then I should use 2*value when setti
Jean-Francois Moine wrote:
> On Sun, 28 Feb 2010 08:55:04 +0100
> Németh Márton wrote:
>
>> On some webcams a feedback LED can be found. This LED usually shows
>> the state of streaming mode: this is the "Auto" mode. The LED can
>> be programmed to constantly switched off state (e.g. for power sa
On Sun, 28 Feb 2010 08:55:04 +0100
Németh Márton wrote:
> On some webcams a feedback LED can be found. This LED usually shows
> the state of streaming mode: this is the "Auto" mode. The LED can
> be programmed to constantly switched off state (e.g. for power saving
> reasons, preview mode) or on
On Sun, 28 Feb 2010 19:49:51 +0100
Jean-Francois Moine wrote:
> On Sat, 27 Feb 2010 21:20:27 +0100
> Antonio Ospite wrote:
>
> > +static int sd_querymenu(struct gspca_dev *gspca_dev,
> > + struct v4l2_querymenu *menu)
> > +{
> > + switch (menu->id) {
> > + case V4L2_CID_POWER_LINE
On Sun, 28 Feb 2010 19:46:36 +0100
Jean-Francois Moine wrote:
> On Sat, 27 Feb 2010 21:20:26 +0100
> Antonio Ospite wrote:
>
> > * Indent with tabs, not with spaces.
> > * Less indentation for controls index comments.
> [snip]
> > -},
> > +},
> > };
>
> I had preferred one more
On Sun, 28 Feb 2010 19:38:14 +0100
Jean-Francois Moine wrote:
> On Sat, 27 Feb 2010 21:20:22 +0100
> Antonio Ospite wrote:
>
> > Exposure is now a u16 value, both MSB and LSB are set, but values in
> > the v4l2 control are limited to the interval [0,506] as 0x01fa (506)
> > is the maximum obser
On Sat, 27 Feb 2010 21:20:27 +0100
Antonio Ospite wrote:
> +static int sd_querymenu(struct gspca_dev *gspca_dev,
> + struct v4l2_querymenu *menu)
> +{
> + switch (menu->id) {
> + case V4L2_CID_POWER_LINE_FREQUENCY:
> + switch (menu->index) {
> + case 0:
On Sat, 27 Feb 2010 21:20:26 +0100
Antonio Ospite wrote:
> * Indent with tabs, not with spaces.
> * Less indentation for controls index comments.
[snip]
> -},
> +},
> };
I had preferred one more TAB for all controls.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
On Sat, 27 Feb 2010 21:20:22 +0100
Antonio Ospite wrote:
> Exposure is now a u16 value, both MSB and LSB are set, but values in
> the v4l2 control are limited to the interval [0,506] as 0x01fa (506)
> is the maximum observed value with AEC enabled.
[snip]
> .type= V4L2_CTRL_
From: Márton Németh
Make the local variables and functions static. Some of them are not exported by
their
symbol name but used trough other means. For example a pointer of the operation
structure is passed through a function call.
This will remove the following sparse warnings (see "make C=1"):
Hi to all,
I've tried my Empire Dual TV usb device which is supported and correctly
recognized by the kernel.
Digital TV works, but analogue tv is slow and with no audio.
I suppose that there is something wrong in the GPIO analogue setting.
I would like to know what I can do to solve the issue.
From: Márton Németh
Use NULL when calling a function with pointer parameter, initializing a
pointer and returning a pointer. This will remove the following sparse
warning at different locations (see "make C=1"):
* warning: Using plain integer as NULL pointer
Signed-off-by: Márton Németh
---
di
From: Márton Németh
When power management is not configured (CONFIG_PM) then some code is no longer
necessary.
This patch will remove the following compiler warnings:
* pd-dvb.c: In function 'poseidon_fe_release':
* pd-dvb.c:101: warning: unused variable 'pd'
* pd-video.c:14: warning: 'pm_vid
On Fri, 2010-02-26 at 17:23 +0100, Lars Hanisch wrote:
> Hi,
>
> while working on a small test app which repacks the ivtv-PS into a TS, I
> received a sample from a cx18-based card. The
> TS contains the video PID 301, audio PID 300 and PCR pid 101.
>
> Where do these PIDs come from, are th
Dmitry Torokhov wrote:
> On Sun, Feb 28, 2010 at 07:44:32AM +0100, Németh Márton wrote:
>> Hi,
>> Dmitry Torokhov wrote:
>>> The HID layer has some scan codes of the form 0xffbc for logitech
>>> devices which do not work if scancode is typed as signed int, so we need
>>> to switch to unsigned i
36 matches
Mail list logo
