On 6/16/24 23:04, Christoph Hellwig wrote:
> Fold blk_flush_policy into the only caller to prepare for pending changes
> to it.
>
> Signed-off-by: Christoph Hellwig
> Reviewed-by: Bart Van Assche
> Reviewed-by: Damien Le Moal
> Reviewed-by: Hannes Reinecke
> ---
>
Looks good.
Reviewed-by:
On 6/16/24 23:04, Christoph Hellwig wrote:
> queue_attr_store updates attributes used to control generating I/O, and
> can cause malformed bios if changed with I/O in flight. Freeze the queue
> in common code instead of adding it to almost every attribute.
>
> Signed-off-by: Christoph Hellwig
> Re
On 6/16/24 23:04, Christoph Hellwig wrote:
> virtblk_update_cache_mode boils down to a single call to
> blk_queue_write_cache. Remove it in preparation for moving the cache
> control flags into the queue_limits.
>
> Signed-off-by: Christoph Hellwig
> Reviewed-by: Bart Van Assche
> Reviewed-by: Ste
On 6/16/24 23:04, Christoph Hellwig wrote:
> Since commit 7437bb73f087 ("block: remove support for the host aware zone
> model"), only ZBC devices expose a zoned access model. sd_is_zoned is
> used to check for that and thus return false for host aware devices.
>
> Replace the helper with the simp
Hello Chenyu,
On 6/14/2024 10:01 PM, Chen Yu wrote:
On 2024-06-14 at 12:48:37 +0200, Vincent Guittot wrote:
On Fri, 14 Jun 2024 at 11:28, Peter Zijlstra wrote:
On Thu, Jun 13, 2024 at 06:15:59PM +, K Prateek Nayak wrote:
Effects of call_function_single_prep_ipi()
===
Hello Vincent, Peter,
On 6/16/2024 8:27 PM, Vincent Guittot wrote:
On Sat, 15 Jun 2024 at 03:28, Peter Zijlstra wrote:
On Fri, Jun 14, 2024 at 12:48:37PM +0200, Vincent Guittot wrote:
On Fri, 14 Jun 2024 at 11:28, Peter Zijlstra wrote:
Vincent [5] pointed out a case where the idle load k
Hello Russell,
On 6/15/2024 7:56 PM, Russell King (Oracle) wrote:
On Thu, Jun 13, 2024 at 06:15:59PM +, K Prateek Nayak wrote:
o Dropping the ARM results since I never got my hands on the ARM64
system I used in my last testing. If I do manage to get my hands on it
again, I'll rerun th
On Tue, Jun 11, 2024 at 10:49:36AM +0200, Krzysztof Kozlowski wrote:
> On 04/06/2024 16:22, Michael Walle wrote:
> > Li Yang's mail address is bouncing, replace it with Shawn Guo's one.
> >
> > Signed-off-by: Michael Walle
> > ---
> > This is marked as an RFC because it is more of a question for
On Sat, 15 Jun 2024 at 03:28, Peter Zijlstra wrote:
>
> On Fri, Jun 14, 2024 at 12:48:37PM +0200, Vincent Guittot wrote:
> > On Fri, 14 Jun 2024 at 11:28, Peter Zijlstra wrote:
>
> > > > Vincent [5] pointed out a case where the idle load kick will fail to
> > > > run on an idle CPU since the IPI
On Tue, Jun 04, 2024 at 04:22:48PM +0200, Michael Walle wrote:
> Remove Li Yang from all device tree bindings because mails to this
> address are bouncing.
>
> Commit fbdd90334a62 ("MAINTAINERS: Drop Li Yang as their email address
> stopped working") already removed the entry from the MAINTAINERS
Thomas Huth writes:
> The "topology_updates" switch has been removed four years ago in commit
> c30f931e891e ("powerpc/numa: remove ability to enable topology updates"),
> so let's remove this from the documentation, too.
>
> Signed-off-by: Thomas Huth
> ---
> Documentation/admin-guide/kernel-p
On Mon, 17 Jun 2024 18:28:07 +0530
Naveen N Rao wrote:
> Hi Abhishek,
>
> On Mon, Jun 10, 2024 at 11:45:09AM GMT, Abhishek Dubey wrote:
> > This is an adaptation of commit f3a112c0c40d ("x86,rethook,kprobes:
> > Replace kretprobe with rethook on x86") to PowerPC.
> >
> > Replaces the kretprobe
On 6/17/24 8:54 PM, Paul E. McKenney wrote:
> On Mon, Jun 17, 2024 at 07:23:36PM +0200, Vlastimil Babka wrote:
>> On 6/17/24 6:12 PM, Paul E. McKenney wrote:
>>> On Mon, Jun 17, 2024 at 05:10:50PM +0200, Vlastimil Babka wrote:
On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
> On Wed, Jun 12,
On 6/17/24 7:04 PM, Jason A. Donenfeld wrote:
>>> Vlastimil, this is just checking a boolean (which could be
>>> unlikely()'d), which should have pretty minimal overhead. Is that
>>> alright with you?
>>
>> Well I doubt we can just set and check it without any barriers? The
>> completion of the las
On 6/17/24 8:42 PM, Uladzislau Rezki wrote:
>> +
>> +s = container_of(work, struct kmem_cache, async_destroy_work);
>> +
>> +// XXX use the real kmem_cache_free_barrier() or similar thing here
> It implies that we need to introduce kfree_rcu_barrier(), a new API, which i
> wanted to avoid i
On 6/17/24 16:05, James Bottomley wrote:
On Mon, 2024-06-17 at 15:56 -0400, Stefan Berger wrote:
On 6/17/24 15:42, James Bottomley wrote:
On Mon, 2024-06-17 at 15:34 -0400, Stefan Berger wrote:
Fix the following type of error message caused by a missing call
to
tpm2_sessions_init() in the
On Mon, 2024-06-17 at 15:56 -0400, Stefan Berger wrote:
>
>
> On 6/17/24 15:42, James Bottomley wrote:
> > On Mon, 2024-06-17 at 15:34 -0400, Stefan Berger wrote:
> > > Fix the following type of error message caused by a missing call
> > > to
> > > tpm2_sessions_init() in the IBM vTPM driver:
> >
On 6/17/24 15:42, James Bottomley wrote:
On Mon, 2024-06-17 at 15:34 -0400, Stefan Berger wrote:
Fix the following type of error message caused by a missing call to
tpm2_sessions_init() in the IBM vTPM driver:
[ 2.987131] tpm tpm0: tpm2_load_context: failed with a TPM error
0x01C4
[ 2.
On Mon, 2024-06-17 at 15:34 -0400, Stefan Berger wrote:
> Fix the following type of error message caused by a missing call to
> tpm2_sessions_init() in the IBM vTPM driver:
>
> [ 2.987131] tpm tpm0: tpm2_load_context: failed with a TPM error
> 0x01C4
> [ 2.987140] ima: Error Communicating to
I suggest to specify email addresses for message recipients not only
in the header field “Cc”.
…
> +++ b/sound/soc/fsl/lpc3xxx-i2s.c
> @@ -0,0 +1,393 @@
…
> +static int lpc3xxx_i2s_startup(struct snd_pcm_substream *substream, struct
> snd_soc_dai *cpu_dai)
> +{
…
> + int ret = 0;
> +
> +
Fix the following type of error message caused by a missing call to
tpm2_sessions_init() in the IBM vTPM driver:
[2.987131] tpm tpm0: tpm2_load_context: failed with a TPM error 0x01C4
[2.987140] ima: Error Communicating to TPM chip, result: -14
Fixes: d2add27cf2b8 ("tpm: Add NULL primary
On Mon, Jun 17, 2024 at 07:23:36PM +0200, Vlastimil Babka wrote:
> On 6/17/24 6:12 PM, Paul E. McKenney wrote:
> > On Mon, Jun 17, 2024 at 05:10:50PM +0200, Vlastimil Babka wrote:
> >> On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
> >> > On Wed, Jun 12, 2024 at 08:38:02PM -0700, Paul E. McKenney wr
On Mon, Jun 17, 2024 at 07:23:36PM +0200, Vlastimil Babka wrote:
> On 6/17/24 6:12 PM, Paul E. McKenney wrote:
> > On Mon, Jun 17, 2024 at 05:10:50PM +0200, Vlastimil Babka wrote:
> >> On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
> >> > On Wed, Jun 12, 2024 at 08:38:02PM -0700, Paul E. McKenney wr
On Fri, Jun 14, 2024 at 11:08:44PM +0530, Anjali K wrote:
> Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-*
> results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as
> shown below.
>
> kernel BUG at mm/usercopy.c:102!
> Oops: Exception in kernel mo
On Sun, 16 Jun 2024 20:52:26 -0700, Jeff Johnson wrote:
> With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
> WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-fiq.o
>
> Add the missing invocation of the MODULE_DESCRIPTION() macro.
>
>
Applied to
https://git.ke
On 6/17/24 6:12 PM, Paul E. McKenney wrote:
> On Mon, Jun 17, 2024 at 05:10:50PM +0200, Vlastimil Babka wrote:
>> On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
>> > On Wed, Jun 12, 2024 at 08:38:02PM -0700, Paul E. McKenney wrote:
>> >> o Make the current kmem_cache_destroy() asynchronously wait fo
On Mon, Jun 17, 2024 at 06:57:45PM +0200, Jason A. Donenfeld wrote:
> On Mon, Jun 17, 2024 at 06:42:23PM +0200, Uladzislau Rezki wrote:
> > On Mon, Jun 17, 2024 at 06:33:23PM +0200, Jason A. Donenfeld wrote:
> > > On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
> > > > Here if an "err" is
On Mon, Jun 17, 2024 at 06:38:52PM +0200, Vlastimil Babka wrote:
> On 6/17/24 6:33 PM, Jason A. Donenfeld wrote:
> > On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
> >> Here if an "err" is less then "0" means there are still objects
> >> whereas "is_destroyed" is set to "true" which is no
On Mon, Jun 17, 2024 at 06:42:23PM +0200, Uladzislau Rezki wrote:
> On Mon, Jun 17, 2024 at 06:33:23PM +0200, Jason A. Donenfeld wrote:
> > On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
> > > Here if an "err" is less then "0" means there are still objects
> > > whereas "is_destroyed" is
> On 17 Jun 2024, at 7:29 PM, James Clark wrote:
>
>
>
> On 17/06/2024 14:03, Athira Rajeev wrote:
>> commit 80d496be89ed ("perf report: Add support for profiling JIT
>> generated code") added support for profiling JIT generated code.
>> This patch handles dso's of form "/tmp/perf-$PID.map".
> On 17 Jun 2024, at 8:30 PM, James Clark wrote:
>
>
>
> On 17/06/2024 13:21, Athira Rajeev wrote:
>> Running "perftool-testsuite_probe" fails as below:
>>
>> ./perf test -v "perftool-testsuite_probe"
>> 83: perftool-testsuite_probe : FAILED
>>
>> There are three fails:
>>
>> 1. Regexp n
On Mon, Jun 17, 2024 at 06:33:23PM +0200, Jason A. Donenfeld wrote:
> On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
> > Here if an "err" is less then "0" means there are still objects
> > whereas "is_destroyed" is set to "true" which is not correlated
> > with a comment:
> >
> > "Destruc
On 6/17/24 6:33 PM, Jason A. Donenfeld wrote:
> On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
>> Here if an "err" is less then "0" means there are still objects
>> whereas "is_destroyed" is set to "true" which is not correlated
>> with a comment:
>>
>> "Destruction happens when no object
On Mon, Jun 17, 2024 at 6:30 PM Uladzislau Rezki wrote:
> Here if an "err" is less then "0" means there are still objects
> whereas "is_destroyed" is set to "true" which is not correlated
> with a comment:
>
> "Destruction happens when no objects"
The comment is just poorly written. But the logic
On Mon, Jun 17, 2024 at 04:56:17PM +0200, Jason A. Donenfeld wrote:
> On Mon, Jun 17, 2024 at 03:50:56PM +0200, Uladzislau Rezki wrote:
> > On Fri, Jun 14, 2024 at 09:33:45PM +0200, Jason A. Donenfeld wrote:
> > > On Fri, Jun 14, 2024 at 02:35:33PM +0200, Uladzislau Rezki wrote:
> > > > + /*
On Mon, Jun 17, 2024 at 5:48 PM Krzysztof Kozlowski wrote:
>
> On 17/06/2024 16:04, Piotr Wojtaszczyk wrote:
> >>
> >>> It's used by snd_soc_dai_init_dma_data() in [PATCH v3 4/4] to give the
> >>> dmaengine a
> >>> hint which dma config to use. The LPC32xx doesn't have yet a dmamux
> >>> driver l
On Fri, Jun 14, 2024 at 09:27:14PM +1000, Michael Ellerman wrote:
> commit 2d43cc701b96f910f50915ac4c2a0cae5deb734c upstream.
> The 'std' instruction requires a 4-byte aligned displacement because
> it is a DS-form instruction, and as the assembler says, 18 is not a
> multiple of 4.
You learn some
Hi!
On Mon, Jun 17, 2024 at 10:35:09AM +0800, Jinglin Wen wrote:
> + cmplwi cr0,r4,0/* runtime base addr is zero */
Just write
cmpwi r4,0
cr0 is the default, also implicit in many other instructions, please
don't clutter the source code. All the extra stuff makes you miss the
th
On Mon, Jun 17, 2024 at 05:10:50PM +0200, Vlastimil Babka wrote:
> On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
> > On Wed, Jun 12, 2024 at 08:38:02PM -0700, Paul E. McKenney wrote:
> >> o Make the current kmem_cache_destroy() asynchronously wait for
> >>all memory to be returned, then comple
On 17/06/2024 16:04, Piotr Wojtaszczyk wrote:
>>
>>> It's used by snd_soc_dai_init_dma_data() in [PATCH v3 4/4] to give the
>>> dmaengine a
>>> hint which dma config to use. The LPC32xx doesn't have yet a dmamux driver
>>> like
>>
>> and if I change driver platform data to foo and bar, does the DT
On 6/13/24 2:22 PM, Jason A. Donenfeld wrote:
> On Wed, Jun 12, 2024 at 08:38:02PM -0700, Paul E. McKenney wrote:
>> oMake the current kmem_cache_destroy() asynchronously wait for
>> all memory to be returned, then complete the destruction.
>> (This gets rid of a valuable debugging te
The 06/17/2024 15:40, Florian Weimer wrote:
> >> A user can still set it by interacting with the register directly, but I
> >> guess
> >> we want something for the glibc interface..
> >>
> >> Dave, any thoughts here?
> >
> > adding Florian too, since i found an old thread of his that tried
> > to
On 17/06/2024 13:21, Athira Rajeev wrote:
> Running "perftool-testsuite_probe" fails as below:
>
> ./perf test -v "perftool-testsuite_probe"
> 83: perftool-testsuite_probe : FAILED
>
> There are three fails:
>
> 1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on
> i
On Mon, Jun 17, 2024 at 03:50:56PM +0200, Uladzislau Rezki wrote:
> On Fri, Jun 14, 2024 at 09:33:45PM +0200, Jason A. Donenfeld wrote:
> > On Fri, Jun 14, 2024 at 02:35:33PM +0200, Uladzislau Rezki wrote:
> > > + /* Should a destroy process be deferred? */
> > > + if (s->flags & SLAB_DEFER_DESTROY
On 6/14/24 9:33 PM, Jason A. Donenfeld wrote:
> On Fri, Jun 14, 2024 at 02:35:33PM +0200, Uladzislau Rezki wrote:
>> +/* Should a destroy process be deferred? */
>> +if (s->flags & SLAB_DEFER_DESTROY) {
>> +list_move_tail(&s->list, &slab_caches_defer_destroy);
>> +sc
On Mon, Jun 17, 2024 at 08:04:53AM +0200, Christoph Hellwig wrote:
> @@ -352,7 +355,6 @@ enum blk_bounce {
No more users of "enum blk_bounce" after this, so you can delete that
too.
> struct queue_limits {
> unsigned intfeatures;
> unsigned intflags;
> - e
On Wed, Jun 12, 2024 at 03:23:17PM GMT, Nicholas Piggin wrote:
> run_qemu_status() looks for "EXIT: STATUS=%d" if the harness command
> returned 1, to determine the final status of the test. In the case of
> panic tests, QEMU should terminate before successful exit status is
> known, so the run_pan
On Fri, Jun 14, 2024 at 10:56:02AM GMT, Nicholas Piggin wrote:
> On Wed Jun 12, 2024 at 5:26 PM AEST, Andrew Jones wrote:
> > On Wed, Jun 12, 2024 at 03:23:17PM GMT, Nicholas Piggin wrote:
> > > run_qemu_status() looks for "EXIT: STATUS=%d" if the harness command
> > > returned 1, to determine the
On Mon, Jun 17, 2024 at 2:14 PM Krzysztof Kozlowski wrote:
>
> On 17/06/2024 11:33, Piotr Wojtaszczyk wrote:
> > On Sat, Jun 15, 2024 at 12:01 PM Krzysztof Kozlowski
> > wrote:
> >> Do not attach (thread) your patchsets to some other threads (unrelated
> >> or older versions). This buries them d
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar
---
v2: Hold rescan lock till we get the bus address.
v3: Now that we are taking copy of bus,
On 17/06/2024 14:03, Athira Rajeev wrote:
> commit 80d496be89ed ("perf report: Add support for profiling JIT
> generated code") added support for profiling JIT generated code.
> This patch handles dso's of form "/tmp/perf-$PID.map".
>
> Some of the references doesn't check exactly for same patt
On Fri, Jun 14, 2024 at 09:33:45PM +0200, Jason A. Donenfeld wrote:
> On Fri, Jun 14, 2024 at 02:35:33PM +0200, Uladzislau Rezki wrote:
> > + /* Should a destroy process be deferred? */
> > + if (s->flags & SLAB_DEFER_DESTROY) {
> > + list_move_tail(&s->list, &slab_caches_defer_destro
* Szabolcs Nagy:
>> A user can still set it by interacting with the register directly, but I
>> guess
>> we want something for the glibc interface..
>>
>> Dave, any thoughts here?
>
> adding Florian too, since i found an old thread of his that tried
> to add separate PKEY_DISABLE_READ and PKEY_D
Thomas Huth writes:
> The "topology_updates" switch has been removed four years ago in commit
> c30f931e891e ("powerpc/numa: remove ability to enable topology updates"),
> so let's remove this from the documentation, too.
>
> Signed-off-by: Thomas Huth
Acked-by: Nathan Lynch
Thanks!
perf test "perf script tests" fails as below in systems
with python 3.6
File
"/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py",
line 442
if line := p.stdout.readline():
^
SyntaxError: invalid syntax
--- Cleaning up ---
commit 80d496be89ed ("perf report: Add support for profiling JIT
generated code") added support for profiling JIT generated code.
This patch handles dso's of form "/tmp/perf-$PID.map".
Some of the references doesn't check exactly for same pattern.
some uses "if (!strncmp(dso_name, "/tmp/perf-", 10
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in
Hi Abhishek,
On Mon, Jun 10, 2024 at 11:45:09AM GMT, Abhishek Dubey wrote:
> This is an adaptation of commit f3a112c0c40d ("x86,rethook,kprobes:
> Replace kretprobe with rethook on x86") to PowerPC.
>
> Replaces the kretprobe code with rethook on Power. With this patch,
> kretprobe on Power uses
Thomas Huth writes:
> The "topology_updates" switch has been removed four years ago in commit
> c30f931e891e ("powerpc/numa: remove ability to enable topology updates"),
> so let's remove this from the documentation, too.
>
> Signed-off-by: Thomas Huth
> ---
> Documentation/admin-guide/kernel-pa
On Fri, Jun 14, 2024 at 09:27:14PM +1000, Michael Ellerman wrote:
> commit 2d43cc701b96f910f50915ac4c2a0cae5deb734c upstream.
>
> Building ppc64le_defconfig with GCC 14 fails with assembler errors:
>
All backports now queued up,t hanks!
greg k-h
Running "perftool-testsuite_probe" fails as below:
./perf test -v "perftool-testsuite_probe"
83: perftool-testsuite_probe : FAILED
There are three fails:
1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on
inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ FAIL ]
On 17/06/2024 11:33, Piotr Wojtaszczyk wrote:
> On Sat, Jun 15, 2024 at 12:01 PM Krzysztof Kozlowski wrote:
>> Do not attach (thread) your patchsets to some other threads (unrelated
>> or older versions). This buries them deep in the mailbox and might
>> interfere with applying entire sets.
>
> I
Jinglin Wen writes:
> According to the code logic, when the kernel is loaded to address 0,
> no copying operation should be performed, but it is currently being
> done.
>
> This patch fixes the issue where the kernel code was incorrectly
> duplicated to address 0 when booting from address 0.
>
> S
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the bounce flag into the features field to reclaim a little bit of
space.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-settings.c| 1 -
block/blk.h | 2 +-
drivers/scsi/scsi_lib.c | 2 +-
include
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the skip_tagset_quiesce flag into the queue_limits feature field so
that it can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-mq-debugfs.c | 1 -
drivers/nvme/host/core.c
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the pci_p2pdma flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-mq-debugfs.c | 1 -
drivers/nvme/host/core.c | 8 +++--
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the zone_resetall flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-mq-debugfs.c | 1 -
drivers/block/null_blk/zo
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the zoned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-settings.c | 5 ++---
drivers/block/null_blk/zoned.c | 2 +-
drivers/block/ublk_d
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the poll flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supporte
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the dax flag into the queue_limits feature field so that it can be
set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-mq-debugfs.c | 1 -
drivers/md/dm-table.c| 4 ++--
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the nowait flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
suppor
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the synchronous flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig
Reviewed-by: Damien Le Moal
---
block/blk-mq-debugfs.c| 1 -
drivers/block/brd.c
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the stable_writes flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
The flag is now inherited by blk_stack_limits, which greatly simplifies
the code in dm, and fixed md which previously did not pass on
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the io_stat flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Simplify md and dm to set the flag unconditionally instead of avoiding
setting a simple flag for cases where it already is set by other mea
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the add_random flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Note that this also removes code from dm to clear the flag based on
the underlying devices, which can't be reached as dm devices will
al
> Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
> requires that only whitelisted areas in slab/slub objects can be copied to
> userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY.
> Dtl contains hypervisor dispatch events which are expected to be r
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the nonrot flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Use the chance to switch to defaulting to non-rotational and require
the driver to opt into rotational, which matches the polarity of the
sy
On 6/17/24 08:04, Christoph Hellwig wrote:
Move the cache control settings into the queue_limits so that the flags
can be set atomically with the device queue frozen.
Add new features and flags field for the driver set flags, and internal
(usually sysfs-controlled) flags in the block layer. Not
On 6/17/24 08:04, Christoph Hellwig wrote:
Move a bit of code that sets up the zone flag and the write granularity
into sd_zbc_read_zones to be with the rest of the zoned limits.
Signed-off-by: Christoph Hellwig
---
drivers/scsi/sd.c | 21 +
drivers/scsi/sd_zbc.c | 9
On 6/17/24 08:04, Christoph Hellwig wrote:
blkfront always had a robust negotiation protocol for detecting a write
cache. Stop simply disabling cache flushes in the block layer as the
flags handling is moving to the atomic queue limits API that needs
user context to freeze the queue for that. I
On Sat, Jun 15, 2024 at 12:01 PM Krzysztof Kozlowski wrote:
> Do not attach (thread) your patchsets to some other threads (unrelated
> or older versions). This buries them deep in the mailbox and might
> interfere with applying entire sets.
I'm sorry about that, it won't happen again.
> > + dma
> On 16 Jun 2024, at 8:33 PM, Adrian Hunter wrote:
>
> On 14/06/24 20:27, Athira Rajeev wrote:
>> perf test "perf script tests" fails as below in systems
>> with python 3.6
>>
>> File
>> "/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py",
>> line 442
>> if lin
On Mon, Jun 17, 2024 at 08:04:28AM +0200, Christoph Hellwig wrote:
> blkfront always had a robust negotiation protocol for detecting a write
> cache. Stop simply disabling cache flushes in the block layer as the
> flags handling is moving to the atomic queue limits API that needs
> user context to
This change is based on Sam Bobroff's patches which aimed
to allow recovery to happen in parallel between PHBs and PEs,
Due to various reasons the patches did not get in.
But having parallel recovery between PHBs is fairly simple and
gives significant improvement on powervm, Since powervm maintain
Currnetly, with a single event queue EEH recovery is entirely
serialized and takes place within a single kernel thread. This
can cause recovery to take a long time when there are many
devices.
Have the recovery event queue per PHB and allow the recovery to
happen in parallel for all the PHBs.
Sig
85 matches
Mail list logo
