On Tue, 7 Jun 2011 18:32:37 +0530
Vijay Nikam wrote:
> Dear All,
>
> I have mpc8313 powerpc based board with silicon revision 2.1. the
> processor has two ETH ports (eTsec1 and eTsec2) i.e. eth0 and eth1.
> eth0 is 1Gbps port and eth1 is 100Mbps port. On board there is L2
> switch from TANTOS2G
Hello Scott,
Thanks for the prompt reply.
> What's your CPU utilization? The CPU may just not be able to keep up with
> that much traffic, with the software you're running.
The software I am using to check bandwidth is 'iperf'. Without running iperf the
CPU utilization varies around 30-50% and w
> Subject: [gianfar]bandwidth management problem on mpc8313 based board
...
> I have mpc8313 powerpc based board with silicon revision 2.1. the
> processor has two ETH ports (eTsec1 and eTsec2) i.e. eth0 and eth1.
> eth0 is 1Gbps port and eth1 is 100Mbps port. On board there is L2
> switch from TAN
On Wed, 8 Jun 2011 16:21:03 +0530
Vijay Nikam wrote:
> Hello Scott,
>
> Thanks for the prompt reply.
>
> > What's your CPU utilization? The CPU may just not be able to keep up with
> > that much traffic, with the software you're running.
> The software I am using to check bandwidth is 'iperf'.
