2008/4/25 Siju George [EMAIL PROTECTED]:
On Fri, Apr 25, 2008 at 3:47 AM, Lord Sporkton [EMAIL PROTECTED] wrote:
My appologies, i am indeed using GENERIC,
I did think that perhaps it did not support ntfs, but then i also
thought it would be rather absent minded to have included
On 2008-04-27, Lord Sporkton [EMAIL PROTECTED] wrote:
Personally i feel it is wrong to include a controlling mechanism for a
feature that is not included. I feel if i have to go so far as to
rebuild my kernel, then i can certainly take a few more steps to add
mount_ntfs.
Sounds like an easy
On Sun, Apr 27, 2008 at 12:48 AM, Ivo van der Sangen [EMAIL PROTECTED] wrote:
Would it be a good idea to note the lack of support for NTFS
filesystems in a GENERIC kerel in mount_ntfs(8)? If it is appreciated
I will send a diff.
[...]
But then it has to be removed *when* NTFS becomes a part
On Thu, Apr 24, 2008 at 06:03:13PM -0400, jmc wrote:
--- Lord Sporkton [Thu, Apr 24, 2008 at 02:32:37PM -0700]: ---7
I have an NTFS drive attached via USB that was previously attached to
an XP home system
[ ... ]
# mount -t ntfs -r /dev/sd0i /mnt/usb2
mount_ntfs: /dev/sd0i on
I have an NTFS drive attached via USB that was previously attached to
an XP home system
I am trying to now attach this drive to my OpenBSD server
I get the following error however im unsure what im doing wrong
also, why does it show as a scsi device, its a pata drive in a usb enclosure?
I
--- Lord Sporkton [Thu, Apr 24, 2008 at 02:32:37PM -0700]: ---7
I have an NTFS drive attached via USB that was previously attached to
an XP home system
[ ... ]
# mount -t ntfs -r /dev/sd0i /mnt/usb2
mount_ntfs: /dev/sd0i on /mnt/usb2: Operation not supported
you don't say if7you're using
My appologies, i am indeed using GENERIC,
I did think that perhaps it did not support ntfs, but then i also
thought it would be rather absent minded to have included mount_ntfs
if support was not included, thus since i had mount_ntfs, i assumed i
had support for it.
I will look into adding ntfs
On 2008-04-24, Lord Sporkton [EMAIL PROTECTED] wrote:
I get the following error however im unsure what im doing wrong
also, why does it show as a scsi device, its a pata drive in a usb enclosure?
USB mass storage devices use the SCSI protocol in a USB wrapper.
The bridge chip in the enclosure
--- Lord Sporkton [Thu, Apr 24, 2008 at 03:17:16PM -0700]: ---
My appologies, i am indeed using GENERIC,
I did think that perhaps it did not support ntfs, but then i also
thought it would be rather absent minded to have included mount_ntfs
if support was not included, thus since i had
9 matches
Mail list logo