Supported ports in ethtool are displayed based on media type.
For media type fibre and twinaxial, port type is "FIBRE". Media type
Base-T is "TP" and media KR is "Backplane".
V1->V2:
Corrected the subject.
Signed-off-by: Rahul Verma
Signed-off-by: Michal Ka
Supported ports in ethtool are displayed based on media type.
For media type fibre and twinaxial, port type is "FIBRE". Media type
Base-T is "TP" and media KR is "Backplane".
Signed-off-by: Rahul Verma
Signed-off-by: Michal Kalderon
---
drivers/net/ethernet/
From: Rahul Verma
Static Checker Warnings:
drivers/net/ethernet/qlogic/qed/qed_main.c:1510
qed_fill_link_capability()
error: uninitialized symbol 'tcvr_state'.
drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951
qed_mcp_trans_speed_mask()
error: uni
From: Rahul Verma
Set link mode after checking available "supported" link caps
of the port.
Signed-off-by: Rahul Verma
Signed-off-by: Ariel Elior
---
drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 64 +
1 file changed, 45 insertions(+), 19
From: Rahul Verma
Newly added link modes are required to be added
during setting link modes. If the new link mode
is not available during qed_set_link, it may cause
link getting down due to empty supported capability,
being passed to MFW, after setting
From: Rahul Verma
Added transceiver type, speed capability and board types
in HSI, are utilizing to display the accurate link
information in ethtool.
Signed-off-by: Rahul Verma
Signed-off-by: Ariel Elior
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 199
From: Rahul Verma
Align the use of local PTT to propagate through the qed_mcp* API's.
Global ptt should not be used.
Register access should be done through layers. Register address is
mapped into a PTT, PF translation table. Several interface functions
require a P
From: Rahul Verma
This series aligns the ptt propagation as local ptt or global ptt.
Adds new transceiver modes, speed capabilities and board config,
which is utilized to display the enhanced link modes, media types
and speed. Enhances the link with detailed information.
Rahul Verma (5):
qed
From: Rahul Verma
Added transceiver modes with different speed and media type,
speed capability and supported board types in HSI, which
will be utilizing to display correct specification of link
modes and speed type.
Signed-off-by: Rahul Verma
Signed-off-by