On Fri, May 29, 2015 at 04:00:01AM +0200, Andrew Lunn wrote:
FYI:
I have patches which allow DSA to use two cpu interfaces. Seems to
work on my DIR665 with a Marvell Switch.
I will post the patches as an RFC.
Andrew
Does it require the switch CPU ports to support LAG or is it generic
On Fri, May 29, 2015 at 12:58:12PM -0700, Florian Fainelli wrote:
On 29/05/15 11:59, Andrew Lunn wrote:
On Fri, May 29, 2015 at 11:49:54AM -0700, Mathieu Olivari wrote:
On Fri, May 29, 2015 at 04:00:01AM +0200, Andrew Lunn wrote:
FYI:
I have patches which allow DSA to use two cpu
What it requires is that for each user port, you can configure what
cpu port it should use. Marvell devices have this ability, and at a
first look, it seems like SF2 does as well, but i will leave Florian
to answer definitively.
That's right, such configuration happens by using
On Fri, May 29, 2015 at 11:49:54AM -0700, Mathieu Olivari wrote:
On Fri, May 29, 2015 at 04:00:01AM +0200, Andrew Lunn wrote:
FYI:
I have patches which allow DSA to use two cpu interfaces. Seems to
work on my DIR665 with a Marvell Switch.
I will post the patches as an RFC.
On 29/05/15 11:59, Andrew Lunn wrote:
On Fri, May 29, 2015 at 11:49:54AM -0700, Mathieu Olivari wrote:
On Fri, May 29, 2015 at 04:00:01AM +0200, Andrew Lunn wrote:
FYI:
I have patches which allow DSA to use two cpu interfaces. Seems to
work on my DIR665 with a Marvell Switch.
I will post
On Thu, May 28, 2015 at 06:42:15PM -0700, Mathieu Olivari wrote:
This patch set adds initial support for AR8xxx switches using the DSA
subsystem. It currently supports QCA8337 switch, and can be extended to
other hardware in the same family.
This switch was already discussed in the following
This patch set adds initial support for AR8xxx switches using the DSA
subsystem. It currently supports QCA8337 switch, and can be extended to
other hardware in the same family.
This switch was already discussed in the following thread:
https://www.marc.info/?t=14260141744r=1w=2
Below is a