Hi,
On Wed, 2022-11-02 at 11:39 +0100, Christian Eggers wrote:
> According to Wikipedia [1], IPv6 hosts are required to always
> configure a
> link-local address, even if a global address is available. As far as
> I
> know, NM allows only one type of address (link-local / DHCP / manual)
> for an
>
On Wed, 2022-10-26 at 23:16 +0200, Andrea Veri wrote:
Hi Andrea,
It is done:
https://mail.gnome.org/archives/networkmanager-list/2022-November/msg0.html
I think the old list can be shut down. What will happen when sending an
email to the old list? Will a bounce message be sent back? Can it
Hi everybody,
This mailing list at networkmanager-list@gnome.org is about to shut
down ([1]).
[1]
https://mail.gnome.org/archives/networkmanager-list/2022-October/msg6.html
The new mailing list for NetworkManager is at
networkmana...@list.freedesktop.org ([2]).
[2] https://lists.freedeskt
On Thu, 2022-10-27 at 11:49 +0200, Andrea Veri wrote:
>
> The migration to Discourse has been in the discussion for years [1],
> further actions were also communicated in August/September [2] and
> [3]. Either way thanks for your feedback, we'll try to improve the
> process next time anything like
On Wed, 2022-10-26 at 23:15 +0200, Andrea Veri wrote:
> On Wed, Oct 26, 2022 at 9:10 PM Martin wrote:
>
>
> You actually go to https://discourse.gnome.org/tag/networkmanager,
> right top corner where the ring bell is, then click on the
> notification preference you want there :)
yes, that's nic
On Wed, 2022-10-26 at 23:16 +0200, Andrea Veri wrote:
> On Wed, Oct 26, 2022 at 9:29 PM Thomas Haller
> wrote:
> > Hi,
> >
> > I think that "we" (the NetworkManager community) will try to get a
> > mailman mailing list on freedesktop.org. There is already
> > modemmanager-de...@lists.freedesktop.
Hi,
I think that "we" (the NetworkManager community) will try to get a
mailman mailing list on freedesktop.org. There is already
modemmanager-de...@lists.freedesktop.org, so this seems a good fit. Our
git is also on gitlab.freedesktop.org.
It's also unclear whether we should try to automatically
hi Petr,
On Sat, 2022-10-15 at 21:41 +0200, Petr Menšík via networkmanager-list
wrote:
> Hi!
>
> I were traveling on a new train recently with working public wifi.
> Because I use dns=dnsmasq on my laptop, I thought about new
> connection.dns-over-tls setting I have discovered.
>
> I maintain
Hi,
Tomorrow will be our montly online NetworkManager meetup.
Everybody is welcome!! Bring a topic :)
Details:
https://mail.gnome.org/archives/networkmanager-list/2022-June/msg00011.html
https://networkmanager.dev/community/meetup/
Sorry for the late announcement. I almost forgot about it :)
On Wed, 2022-08-10 at 18:44 +0300, Andrei Borzenkov wrote:
> On 10.08.2022 13:09, Thomas Haller wrote:
> > On Wed, 2022-08-10 at 09:01 +0300, Andrei Borzenkov via
> > networkmanager-
> > list wrote:
> > > When automatic connection is deleted/modified, interface is added
> > > to
> > > /var/lib/Netw
On Wed, 2022-08-10 at 09:01 +0300, Andrei Borzenkov via networkmanager-
list wrote:
> When automatic connection is deleted/modified, interface is added to
> /var/lib/NetworkManager/no-auto-default.state. Is there any device
> property to show "no-auto-default" state? Is there any command/D-Bus
> AP
Hi everybody,
Tomorrow will be our montly online NetworkManager meetup.
Everybody is welcome!! Bring a topic :)
Details:
https://mail.gnome.org/archives/networkmanager-list/2022-June/msg00011.html
https://networkmanager.dev/community/meetup/
Thomas
___
On Sun, 2022-07-24 at 22:05 +0800, Turritopsis Dohrnii Teo En Ming via
networkmanager-list wrote:
> Subject: Does NetworkManager support WiFi 6 IEEE 802.11ax USB
> wireless adapters?
>
> Good day from Singapore,
>
> Does NetworkManager support WiFi 6 IEEE 802.11ax USB wireless
> adapters?
Hi,
On Wed, 2022-07-13 at 08:49 -0500, Dan Williams via networkmanager-list
wrote:
> On Wed, 2022-07-13 at 07:57 -0500, Chris Adams via networkmanager-
> list
> wrote:
> > I have my primary ethernet interface configured in a bridge in NM,
> > so
> > that I can run VMs and have them on the local network
Hi everybody,
as announced, tomorrow will be our montly online meetup.
Everybody is welcome!! :)
Details:
https://mail.gnome.org/archives/networkmanager-list/2022-June/msg00011.html
https://networkmanager.dev/community/meetup/
hope to see you.
Thomas
_
On Wed, 2022-07-06 at 15:14 +0200, Sven Schwermer via networkmanager-
list wrote:
> Hi,
>
> I have a device with cellular modem running a Linux-based OS with
> ModemManager/NetworkManager used for the connectivity management.
> Occasionally, the cellular connection breaks and it takes several
>
On Fri, 2022-07-01 at 02:12 +0300, Slava Monich wrote:
>
> What I had in mind was a scenario when the device running network
> manager has more than one Wi-Fi interface, and those are not
> connected
> (but have to be ready to be connected at any time). Passive scans
> produce lots of D-Bus tra
Hi,
In the past, we used to meet at Devconf.cz and also had virtual meetups
in the past 2 years. There was always the idea floating around, that we
could meet regularly and online.
Now, such a meetup is scheduled.
It will be every second Wednesday of the month.
See https://networkmanager.dev/co
On Fri, 2022-06-24 at 17:39 -0700, Jim Garrison via networkmanager-list
wrote:
> When using dhclient, the current lease info, including expiration
> time, is in /var/lib/dhclient/dhclient.leases, and contains
> something similar to
>
> lease {
> interface "enp3s0";
> fixed-addre
Hi,
On Fri, 2022-06-03 at 13:55 +0200, Petr Menšík via networkmanager-list
wrote:
> Hi!
>
> I would like to propose improvement with mdns (and possible llmnr)
> resolution. Current Fedora and Ubuntu contains mdns4_minimal in
> /etc/nsswitch.conf. Which means any name.local gets resolved by mdns
Hi,
On Thu, 2022-06-02 at 10:42 -0700, Aaron Brice via networkmanager-list
wrote:
> I'm using a yocto arm build of NetworkManager 1.32.10 on an embedded
> device. There is a broadcom network device attached over PCIe that
> comes up with a MAC of 00:00:00:00:00:00 on network device enp1s0,
> and
On Mon, 2022-05-30 at 12:49 +0200, Petr Menšík wrote:
> On 5/28/22 22:22, Thomas Haller wrote:
> > As you say, NetworkManager can run dnsmasq as DNS plugin by
> > configuring
> > `[main].dns=dnsmasq` in `man NetworkManager.conf`.
> >
> > In that mode, NetworkManager will spawn the dnsmasq process.
On Fri, 2022-05-27 at 15:30 +0200, Petr Menšík via networkmanager-list
wrote:
> Hi!
>
> I were thinking how could be Network Manager's integration with
> dnsmasq
> improved.
>
> Today it is running separate service in NetworkManager.service. I
> thought about possible solution and think have foun
On Fri, 2022-05-27 at 19:33 +0200, Petr Menšík via networkmanager-list
wrote:
> Hi,
>
> I have a quick question. I think Network Manager has own DHCP client
> capabilities. Can it request RDNSS domain list specified in RFC 6731?
> Were there any request to support it at least partially?
>
> Regar
On Tue, 2022-05-24 at 12:17 +, Alexandre Bard wrote:
> Hello,
>
> I am using networkmanager 1.22.10 and sometimes see a strange
> behavior:
> Our AP is showing in in the list but with a RATE and SIGNAL of "0"
> and
> is not connectable.
>
> # nmcli d wifi list
> IN-USE BSSID SSI
On Tue, 2022-05-17 at 08:34 +, Fr�d�ric Martinsons wrote:
> Thank you for your quick response.
>
> > NetworkManager usually will authenticate the request using
> > PolicyKit.
> > -- unless, you set [main].auth-polkit in `man NetworkManager.conf`
> > or
> > make the request as root user.
> >
On Tue, 2022-05-17 at 06:51 +, Fr�d�ric Martinsons via
networkmanager-list wrote:
> Hello,
> I used NM 1.32.12 in an embedded environment, I have another daemon
> which is responsible for creating and monitoring connection profiles
> via libnm. I recently experienced errors I cannot understand,
On Sat, 2022-05-14 at 22:43 +0300, Andrei Borzenkov wrote:
> On 14.05.2022 22:24, Thomas Haller wrote:
> > Hi,
> >
> >
> > On Sat, 2022-05-14 at 07:38 +0300, Andrei Borzenkov via
> > networkmanager-
> > list wrote:
> > > >
> > > >
> > > > The background is a security requirement. Unused interfa
On Fri, 2022-05-13 at 23:23 +0200, Adrian Freihofer via networkmanager-
list wrote:
> Hi
>
> Is it somehow possible to disable an interface via NetworkManager?
>
> I am thinking of something like:
>
> nmcli connection modify con-eth0 802-3-ethernet.phy disabled
> nmcli connection up con-eth0
>
Hi,
On Sat, 2022-05-14 at 07:38 +0300, Andrei Borzenkov via networkmanager-
list wrote:
> >
> >
> > The background is a security requirement. Unused interfaces must
> > ideally remain disabled at the physical layer when a cable is
> > plugged
> > in. Ideally, the LEDs would also remain dark.
>
On Sun, 2022-04-24 at 22:00 +, Martin wrote:
> Dears,
>
> when I *unplug* the Ethernet of my laptop computer, a new connection
> "enp0s25" appears out of the nothing. When I plug the Ethernet in
> again,
> my usual connection "Wired" is automatically used, probably because
> the
> other connec
Hi,
On Tue, 2022-04-12 at 08:30 +0200, Thomas Haller wrote:
> NetworkManager supports DNS plugins: "dnsmasq", "systemd-resolved"
> and "unbound".
>
> "unbound" was added a long time ago ([2], [3]), but is the most
> incomplete.
> It only spawns "/usr/libexec/dnssec-trigger-script". It does so
>
Hi all,
NetworkManager supports DNS plugins: "dnsmasq", "systemd-resolved"
and "unbound".
"unbound" was added a long time ago ([2], [3]), but is the most incomplete.
It only spawns "/usr/libexec/dnssec-trigger-script". It does so blockingly,
which is problematic ([1]).
The plugin is really a pa
Hi,
On Wed, 2022-03-30 at 22:56 +, Stephen Horton via networkmanager-
list wrote:
> Hello, I'm new to the list; I am working on moving an application to
> Centos Stream 9 running inside an openstack cloud virtual guest. I
> have created:
> /etc/NetworkManager/conf.d/90-dns-none.conf:
> [main
On Thu, 2022-03-24 at 10:47 +0100, Michael Biebl wrote:
> Am 13.03.22 um 22:18 schrieb Thomas Haller:
> > On Sun, 2022-03-13 at 16:01 +0100, Michael Biebl wrote:
> > >
> > > Am 13.03.22 um 12:46 schrieb Thomas Haller:
> > > > On Sat, 2022-03-12 at 21:55 +0100, Michael Biebl wrote:
> > >
> > > > >
On Thu, 2022-03-24 at 23:01 +, rherr via networkmanager-list wrote:
> I have Alpine Linux with the OpenVPN plugin. This works very well
> importing and automatically installing my .ovpn file. I like the
> settings menus and this makes the setup very easy. I haven't found a
> VPN killswitch or a
On Tue, 2022-03-22 at 11:52 +0100, Alfonso Sanchez-Beato via
networkmanager-list wrote:
> Hi there!
>
> I have been using NetworkManager 1.36.2 to create an Access Point,
> but I am having some problems. Only devices that support WPA3 are
> able to connect to the AP. Looking at the history, I see
On Sun, 2022-03-13 at 16:01 +0100, Michael Biebl wrote:
>
> Am 13.03.22 um 12:46 schrieb Thomas Haller:
> > On Sat, 2022-03-12 at 21:55 +0100, Michael Biebl wrote:
>
> > > ./usr/lib/x86_64-linux-gnu/girepository-1.0/NMA4-1.0.typelib
> > > ./usr/lib/x86_64-linux-gnu/libnma-gtk4.so
> > > ./usr/lib/
On Sat, 2022-03-12 at 21:55 +0100, Michael Biebl wrote:
> Am 12.03.22 um 21:47 schrieb Michael Biebl:
> >
> > Hi there,
> >
> > there has been a flurry of updates for nm vpn plugins adding
> > support for
> > GTK4. All of them require a libnma built with GTK4 support which is
> > still marked ex
On Sat, 2022-03-12 at 21:47 +0100, Michael Biebl wrote:
>
> Hi there,
>
> there has been a flurry of updates for nm vpn plugins adding support
> for
> GTK4. All of them require a libnma built with GTK4 support which is
> still marked experimental.
>
> I haven't seen any real follow up commits
On Tue, 2022-03-08 at 22:15 +0100, Thomas Haller wrote:
> of course, that's just an example to show all pieces. Above could be
> written shorter as:
>
> nmcli connection modify $PROFILE --keyfile | \
> nmcli connection modify keyfile \
> connection.uuid $(uuidgen) \
> autocon
Hi,
On Mon, 2022-03-07 at 12:54 +0100, Fernando F. Mancera via
networkmanager-list wrote:
> Hello everyone!
>
> The proposed experimental solutions are:
>
> 1. 'nmcli c show --keyfile $UUID' to output the profile keyfile in
> stdout.
> 2. 'nmcli c add ... --keyfile' to output the generated keyfi
On Tue, 2022-03-08 at 14:57 +0100, Till Maas wrote:
> Hi,
>
> Am Mo., 7. März 2022 um 22:38 Uhr schrieb Thomas Haller via
> networkmanager-list :
> > Hi,
> >
> > On Mon, 2022-03-07 at 12:54 +0100, Fernando F. Mancera via
> > networkmanager-list wrote:
> &
On Tue, 2022-03-08 at 08:35 +0200, Emmanuel Grumbach via
networkmanager-list wrote:
> I realized I am missing a piece before this.
> I need to be able to get and handle nl80211 events, which means that
> I
> need a thread or event loop or something that listens to the nl80211
> channel and parses e
Hi,
On Mon, 2022-03-07 at 12:54 +0100, Fernando F. Mancera via
networkmanager-list wrote:
>
> It has been considered to add experimental new arguments to 'nmcli'
> tool
> related to keyfiles. These arguments will be added with a warning
> message on documentation specifying they are experimenta
On Sat, 2022-02-26 at 23:37 +0200, Emmanuel Grumbach via
networkmanager-list wrote:
> Hi,
>
> I'd like to get some guidance on how to continue the implementation
> of the CSME firmware coexistence.
> We now need to fetch the connection parameters from CSME (through the
> kernel). There is a vendor
On Fri, 2022-02-11 at 13:54 +0100, Edouard Debry via networkmanager-
list wrote:
>
> Hello,
>
> I run mobian on a pinephone.
>
> When mobile data is turned on, the phone receives an ipv6 only
> address. Trouble is that it seems to break connexion sharing.
>
> Some people solved this issue by se
Hi Everybody,
as in the past iterations of DevConf.CZ and DevConf.US, we will again
have a slot for our NetworkManager community meetup.
This will be a virtual meeting on Saturday, January 29, 2022.
We will just meet and discuss NetworkManager and related topics. There
is no fixed agenda. If yo
Hi,
On Wed, 2021-12-29 at 14:20 +0100, Jonas Bygdén via networkmanager-list
wrote:
> Today we configure our Linux clients to use wired 802.1x on the on-
> board ethernet interface in the laptops they get.
If I understand you correctly, you pre-configure machines for others
(like students or emplo
On Tue, 2021-12-14 at 23:53 +0100, Juan A. Rubio via networkmanager-
list wrote:
> Hello,
>
> I'm using Network Manager v1.22.16
>
> I've got an eth0 connection profile configured for DHCP ([ipv4] ->
> method=auto)
>
> When the connection profile is enabled, two DNS servers are received
> on tha
On Thu, 2021-11-18 at 22:11 +, Rao Shoaib via networkmanager-list
wrote:
> Hello everyone,
>
> I have cloned the following repo, but can not figure out how to build
> it. Can someone please provide me with the build instructions?
>
> Regards,
>
> Shoaib
>
> NetworkManager / NetworkManager
On Tue, 2021-11-02 at 20:34 +0800, Woodrow Shen via networkmanager-list
wrote:
> Hi all,
>
> I know there are few methods to find connected clients with AP mode,
> but we have the same
> question as[1] to look for the possibility to dump the information
> like dhcp lease.
>
> Can someone help me
On Thu, 2021-10-28 at 07:21 -0700, mailingl...@bentleyemail.net wrote:
> Our embedded device has a readonly partition for configuration and
> such. /etc/ is on this readonly partition.
>
> We currently use keyfile path=/writable partition in order to get
> system-connections off the readonly part
On Thu, 2021-10-07 at 22:12 +0800, Coiby Xu via networkmanager-list
wrote:
> Hi NM developers,
>
> This is Coiby from the Red Hat Kernel Debug team who is responsible
> for
> Fedora/RHEL's kexec-tools. Currently, kexec-tools parses ifcfg-* or
> .nmconnection to build up dracut cmdline parameter
On Sat, 2021-10-09 at 14:05 +0200, Luis Felipe via networkmanager-list
wrote:
> Hi all,
>
> it's my first post, so please apologize for any mistake.
>
> I have a trouble with NMClient (libnm) and threads in my C-application.
> Here the scenario:
>
> - in the main thread, gmain-loop and NMClient
On Fri, 2021-09-24 at 07:07 +, moonkid--- via networkmanager-list
wrote:
> Hello together,
>
> is it possible to use a fixed (static?) IP on a network interface
> when
> it is configured as "Link-local"?
Currently not.
>
> Let me explain my problem first and the background (Why I want this
Hi,
Since NM 1.0, NM supports a
[main]
configure-and-quit=yes
option in NetworkManager.conf (see also the manual page [1]).
[1] https://networkmanager.dev/docs/api/1.32.10/NetworkManager.conf.html
This tells NM to quit once the interfaces are configured. That works
for static addresses b
On Mon, 2021-08-30 at 15:50 +, Michel, Matthias via networkmanager-
list wrote:
> Hi Thomas
>
> On Tue, 2021-04-27 at 19:46 +0200, Thomas Haller wrote:
> > Hi,
> >
> >
> > On Tue, 2021-04-27 at 12:04 +, Michel, Matthias via
> > networkmanager-
> > list wrote:
> > > Hi
> > > I'm using the
On Thu, 2021-09-02 at 15:22 +, Sascha Zosgornik via networkmanager-
list wrote:
> Hello Mr. Haller,
>
> I am sorry to tell you but the NM-applet becomes very unresponsive
> after
> I changed the IP settings from "Automatic (DHCP)" towards "Automatic
> (DHCP) addresses only" and "Automatic, D
Hi everybody,
as in the past Devconf too, we'll have an informal meetup at DevConf.US
2021, this Thursday (2 September 2021).
https://devconfus2021.sched.com/event/lkgA/networkmanager-community-meetup-devconfus-2021
You are welcome to join and discuss anything related to NetworkManager.
Hope to
On Thu, 2021-08-12 at 21:03 +0300, Andrei Borzenkov via networkmanager-
list wrote:
> Chrony comes with sample NetworkManager dispatcher script that offlines
> NTP sources when interface goes down and onlines them when interface
> comes up. Technically it runs "chronyc onoffline" which tries to
> d
On Tue, 2021-08-03 at 17:45 +0300, Andrei Borzenkov via networkmanager-
list wrote:
> On 03.08.2021 17:38, Thomas Haller via networkmanager-list wrote:
> >
> > Also, if you modify profiles via D-Bus API (which is what nmcli
> > does),
> > then the configuration only
On Tue, 2021-08-03 at 13:26 +, Matthew Starr via networkmanager-
list wrote:
> I am looking for a way to generate connection profile config files
> without applying the settings to the currently enabled network
> interfaces that are already configured. I am using NetworkManager on
> an embedde
On Mon, 2021-08-02 at 09:44 -0700, Michael Uman wrote:
> Hello,
>
> I appreciate the answer I received the other day but unfortunately I
> was unable to figure out how to accomplish this. I am looking for an
> example of how to establish a new wifi connection to an AP using C++. I
> will be using
Hi,
On Sun, 2021-08-01 at 14:19 -0300, Marcus Diniz wrote:
> Hello,
>
> First of all, I'm sorry to copy both gnome-network-list and
> networkmanager-list, because I didn't know or couldn't recognize
> which one would be the proper one to mention this fact.
>
> I've been trying to access my OpenV
On Wed, 2021-07-28 at 15:14 +0200, Sohaib E. wrote:
> I found this error in the logs : ovsdb: Could not connect: No such
> file or directory
>
> My ovsdb's unix socket is in /var/run/openvswitch. I don't think
> Network Manager is expecting another path but if it is, where do I
> change that ?
it
Hi,
On Wed, 2021-07-28 at 12:41 +0200, Sohaib E. wrote:
> Thank you for your quick answer.
>
> I have compiled NetworkManager's package myself but I still faced some
> issues deploying an ovs bridge.
>
> Besides the NetworkManager-ovs.conf (openvswitch-switch.service instead
> of openvswitch.se
On Tue, 2021-07-27 at 18:39 +0200, Sohaib E. via networkmanager-list
wrote:
> Hello,
>
> I'm trying to use Network Manager to deploy ovs bridges on
> debian/ubuntu.
>
> I understand that Network Manager itself do not have such a feature
> and needs an additional plugin called nm-openvswitch. Nev
On Fri, 2021-07-23 at 17:24 +0100, Mark Corbin wrote:
> Hello
>
> I'm trying to control a device hostname independently of
> NetworkManager,
> but am unable to disable NetworkManager's hostname management. I'm
> using
> NM version 1.28.2
>
> I've added the following to the configuration file:
>
On Fri, 2021-07-23 at 11:59 -0400, David H Durgee wrote:
>
> Looking at the documentation for ip xfrm it appears that I should be
> able to issue commands:
>
> ip xfrm policy list
> ip xfrm state list
>
> When I attempt to use them from my login I get an "operation not
> permitted" error,
On Wed, 2021-07-21 at 10:49 -0400, David H Durgee wrote:
> Thomas Haller wrote:
>
> > On Tue, 2021-07-20 at 16:26 -0400, David H Durgee via
> > networkmanager-
> > list wrote:
> >
> > > How can I get traffic statistics by network connection? Is there
> > > a
> > > way
> > > to retrieve this u
On Tue, 2021-07-20 at 16:26 -0400, David H Durgee via networkmanager-
list wrote:
> How can I get traffic statistics by network connection? Is there a
> way
> to retrieve this using nmcli? Is there another tool that will do so?
>
> I have looked around and the tools I see work at the interface
On Tue, 2021-07-20 at 22:04 +0100, Jason Vas Dias via networkmanager-
list wrote:
> If I do :
> # nmcli radio wifi off
> , it disassociates the PHY for the device and I have to
> 'rfkill $id unblock' .
> If I reenable wireless, and do
> # systemctl stop wpa_supplicant
> # mv /usr/sbin/wp
On Thu, 2021-07-15 at 10:17 +0300, Andrei Borzenkov wrote:
> On Wed, Jul 14, 2021 at 5:52 PM Thomas Haller via networkmanager-list
> wrote:
> >
> > So, yes, there should be not much to do except replace the
> > interface
> > name "or
On Wed, 2021-07-14 at 13:32 +0200, m...@mike.franken.de wrote:
> Hi,
>
> thx for your answer.
>
> On Mittwoch, 14. Juli 2021 13:19:44 CEST Thomas Haller wrote:
> [...]
> > > I use the perl module Net::DBus for this job.
> > > The following snippet shows how far I got up to date:
> > >
> > > my
On Wed, 2021-07-14 at 13:10 +0200, m...@mike.franken.de wrote:
> Hi *,
>
> since NetworkManager 1.22 using the signal
> org.freedesktop.NetworkManager.
> Settings.PropertiesChanged is deprecated. One should use
> org.freedesktop.
> DBus.Properties.PropertiesChanged instead. Since NetworkManager 1.
On Tue, 2021-07-06 at 15:42 +, rherr via networkmanager-list wrote:
> Attn: networkmanager-list
>
> I am trying to set up wifi mac address randomization to be automatic. I
> have tried using NetworkManager and selecting "Random" in the space
> provided in the GUI. I tried setting up a "Unit" a
Hi,
On Wed, 2021-06-23 at 01:13 +0200, Denis Prost via networkmanager-list
wrote:
> The only minor problem left is that this connection is not listed in
> know if there is a way to have it appear in nm-applet GUI ?
The GUI would need to explicitly support a certain type, and nm-applet
(in this
Hi everybody,
On behalf of the NetworkManager community, I am happy to announce a new
release of NetworkManager: 1.32.0.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/commit/d9c0d43879e8420dda6482b05341dcfeedf7be43
Find the tarball at our usual location:
https://download.gnome
On Tue, 2021-06-08 at 19:03 +0700, Pedro Ribeiro wrote:
> On Tue, 2021-06-08 at 12:37 +0200, Thomas Haller wrote:
> > That means the effectively used
> > value can first always be configured for each profile, and
> > these
> > default values only matter if the per-profile values
> > e
On Tue, 2021-06-08 at 15:17 +0700, Pedro Ribeiro via networkmanager-
list wrote:
> Hi,
>
> I have the following configuration in spoof.conf in order to anonymise
> MAC addresses when connecting to a network:
>
> [device-mac-randomization]
> wifi.scan-rand-mac-address=yes
>
> [connection-mac-rand
On Thu, 2021-05-27 at 21:40 +0300, Emmanuel Grumbach via
networkmanager-list wrote:
>
> Disclaimer: This feature is available only on vPRO Platforms.
>
> Question to the NM maintainers:
> Would you consider merging patches that would implement this?
Definitely. The most important property for im
Hi,
First of all, as always: enable level=TRACE logging and look at the
logs and have them ready for inspection. Read [1] for hints about
logging.
[1]
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/bae22a45d837e76e805f0f411b2d71748e76625e/contrib/fedora/rpm/NetworkManager.c
Hi,
On Mon, 2021-05-24 at 14:35 -0700, Abu Rasheda via networkmanager-list
wrote:
> Hello,
>
> I am seeing two issues with NM and ovsdb. Issue # 2 is more critical.
>
> In my configuration, I have two bridges in OVS. On one of the bridge,
> the interface needs to be under Network Manager, so I
On Thu, 2021-05-20 at 14:07 +0200, Juan A. Rubio via networkmanager-
list wrote:
> Hello,
>
> I'm using NetworkManager version 1.20.4 on a device with a
> Buildroot-based custom Linux distribution. The version of
> wpa_supplicant is 2.9 and I've noticed that this version of
> supplicant
> has lost
Hi,
On Tue, 2021-05-11 at 13:23 +, Kraxner, Josef AVL/AT via
networkmanager-list wrote:
> Hello,
>
> I have one question regarding CAN support in NetworkManager. I tried
> to set up CAN within NetworkManager, but it doesn’t work.
> Then I noticed that there is anyway no CAN connection type a
Hi,
On Tue, 2021-04-27 at 12:04 +, Michel, Matthias via networkmanager-
list wrote:
> Hi
> I'm using the dhcp=systemd setting in the networkmanager v1.30.2.
Btw, dhcp=systemd is an (intentionally) undocumented option. Eventually
it will be replaced and behave the same as dhcp=internal.
In p
On Mon, 2021-04-19 at 10:32 -0700, Abu Rasheda wrote:
> Thanks, for the reply!
>
> So I have to check manually? no way nmcli saying file exits and quit.
> (because it will still make a file with name ifcfg-xxx-1 if ifcfg-xxx
> exist).
Hi,
not sure why you ask so much about the filename. If you c
On Mon, 2021-04-19 at 09:59 -0400, Lars Kellogg-Stedman via
networkmanager-list wrote:
> I have a system (an OpenShift bare metal node running RHCOS
> 47.83.202103051045-0) with NetworkManager 1.26.0. The system recently
> lost its public ip address. When I logged into the system, I saw:
>
> #
On Fri, 2021-04-16 at 17:57 -0700, Abu Rasheda via networkmanager-list
wrote:
> E.g. running the following command multiple times
>
> nmcli conn add type ethernet
>
> will create multiple files
>
> -rw-r--r--. 1 root root 270 Apr 16 20:53 ifcfg-ethernet
> -rw-r--r--. 1 root root 272 Apr 16 20:54
Hi,
On Fri, 2021-04-16 at 17:52 -0700, Abu Rasheda via networkmanager-list
wrote:
> When a command is executed using nmcli, on the success a line like the
> following is printed.
>
> Connection 'eth0-ethernet' (a24480cb-f5d6-40a6-a716-dba09ab53d07)
> successfully added.
>
> Is it possible to no
On Fri, 2021-04-09 at 10:41 +0200, Florian Klein wrote:
> Hello Thomas,
>
> Thanks a lot for your reply. This is really helpful.
>
> In the meantime I found that this issue got fixed last month in
> Network Manager:
> https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests
On Wed, 2021-04-07 at 17:18 +0200, Florian Klein wrote:
> Dear Network Manager Experts,
>
> we are opening an Access Point with network manager (on a RPI4 with
> Raspbian) and everything is working fine except that when connecting
> from Windows 10 we are asked for a pin first (probably wps pin)
On Tue, 2021-03-23 at 15:28 +0100, Jan Hutař via networkmanager-list
wrote:
> Hello.
>
> Hopefully this is good place to ask. If not, please suggest something
> else.
>
> For quite some time I'm trying to figure out how to create a bridge
> using main network interface (the only one which is rout
On Fri, 2021-03-19 at 12:03 +0100, Thomas Haller via networkmanager-
list wrote:
> On Fri, 2021-03-19 at 06:52 -0400, Adam Sherlock via networkmanager-
> list wrote:
>
Hi,
I forgot to say: Good luck!! :)
Any maybe you'd like to get inspired (or contribute) to
https://github.com/c
On Fri, 2021-03-19 at 06:52 -0400, Adam Sherlock via networkmanager-
list wrote:
> Hello I'm new to programming and in the process of learning Rust. I
> was looking into possibly using your code as a sort of template for
> writing a similar network manager in Rust. I'm not sure if this would
> fall
On Mon, 2021-03-01 at 10:54 -0500, Steve Newcomb wrote:
> I have 2 hosts that experience interruptions in their
> NetworkManager-managed wifi connections.
>
> In an attempt to force the hosts to restore their wifi connections
> more promptly than they otherwise would, I have them running a cron
>
On Thu, 2021-02-18 at 12:28 +0100, Robert Vogelgesang wrote:
> Hello @all,
>
> currently I'm trying to update an old server running CentOS 6, which
> doesn't use NetworkManager, to a system with Networkmanager 1.26.0.
> I'm strugging to find the correct syntax to define "unreachable"
> routes.
>
On Mon, 2021-02-22 at 10:54 +0100, Guillaume Betous wrote:
> Hi list !
>
> We are producing iMX6 based products. We flash the exact same image to
> all of them. The image contains Wi-Fi setting for a first connexion.
> Sometimes (say one
> of ten), the device is not connecting.
>
> On those devi
Hi everybody,
On behalf of the NetworkManager community, I am happy to announce a new
release of NetworkManager: 1.30.0.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/commit/fc29a96097e0f11ab963c27036b6b8b3e1f3d42b
Find the tarball at our usual location:
https://download.gnome
1 - 100 of 325 matches
Mail list logo