On 30 June 2015 at 08:37, younfan33 younfa...@hotmail.com wrote:
From: Tom Deng 2579131...@qq.com
Adding support for OYE-0001 Wireless Router.
OYE-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Hi,
the patch is whitespace broken. your email client most likely replaced
all tabs with spaces. please check your mail clients settings and resend
a version with tabs in it
John
On 30/06/2015 08:37, younfan33 wrote:
From: Tom Deng 2579131...@qq.com
Adding support for OYE-0001
* ben b...@gowasabi.net [30.06.2015 06:48]:
Signed-off-by: ben b...@gowasabi.net
---
package/network/services/hostapd/files/netifd.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/services/hostapd/files/netifd.sh
Speed up wifi up to 2 times in Access Point mode. On rt5350 platfrom I
got speed up from 35-40Mbit to 70-80Mbit, on ar71xx I got improvement
from 45Mbit to 100Mbit with this parameters set in hostapd.conf. It
seems that hostapd expects not only 'wmm_enabled=1' key but also
parameters for WMM.
Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.
Signed-off-by: Lars Kruse li...@sumpfralle.de
---
package/base-files/files/etc/init.d/gpio_switch| 42
Hi,
I assume that if the size of the binary is too big, OpenWRT doesn't
create sysupgrade.bin file.
I've seen that the en25q64 is the default flash memory for the Ralink
MT7628 board. I'm using the w25q128 instead so I change this in the
dts:
m25p80@0 {
#address-cells = 1;
#size-cells = 1;
On 30 June 2015 at 14:49, Baptiste Clenet bapcle...@gmail.com wrote:
I assume that if the size of the binary is too big, OpenWRT doesn't
create sysupgrade.bin file.
I've seen that the en25q64 is the default flash memory for the Ralink
MT7628 board. I'm using the w25q128 instead so I change
2015-06-30 15:56 GMT+02:00 Rafał Miłecki zaj...@gmail.com:
On 30 June 2015 at 14:49, Baptiste Clenet bapcle...@gmail.com wrote:
I assume that if the size of the binary is too big, OpenWRT doesn't
create sysupgrade.bin file.
I've seen that the en25q64 is the default flash memory for the Ralink
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
This patch adds kernel and basic userspace support for
devolo dLAN pro 500 Wireless+
For the PLC interface additional support files in userspace will be required.
These are not part of this patch.
Hi Sven,
I sent the same patch a week ago.
See https://patchwork.ozlabs.org/patch/486993/
Best
lynxis
pgpqL79L7qJSJ.pgp
Description: OpenPGP digital signature
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
u-boot support depends on the next upstream version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a how to was
added to the wiki: [1]
[0]
https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1]
Basically the only error I am seeing is Correctable Error. Also newer
lantiq PCIe drivers have this message wrapped in a if debug enabled
block. So it should be safe to disable this warning.
Signed-off-by: Martin Blumenstingl martin.blumensti...@googlemail.com
---
r45954 (ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender) introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based
Ahoy,
as suggested by olmari, I'm summing up my problems/experience to
hopefully
get this running for me as well as anyone else having this kind of
problem.
In short: I've be trying and failing for more than 4 days now to use a
4G/LTE
Stick as WAN device using NCM and wwan0 instead of slow
Hi,
By slecting a board in menuconfig, OpenWRT sets a maximum binary size
for this specific board. Where is this maximum defined?
Since I don't use the default flash, the maximum size is bigger.
Regards,
--
Baptiste
___
openwrt-devel mailing list
Hi,
It is selected in target/platform/image/Makefile.
Actually there's many rules for each target, so, probably you need to write own
rule for own target there.
In email dated Вторник - 30 июня 2015 19:57:44 user Baptiste Clenet wrote:
Hi,
By slecting a board in menuconfig, OpenWRT sets a
I'm curious on some choices made for wireless networks for release images.
In particular, I unexpectedly saw that the default wireless channels are
not set to auto. At the same time, the default at
http://wiki.openwrt.org/doc/uci/wireless is set to auto. Wouldn't setting
to a particular channel
2015-06-30 20:07 GMT+02:00 N.Leiten nicklei...@gmail.com:
Hi,
It is selected in target/platform/image/Makefile.
Actually there's many rules for each target, so, probably you need to write
own
rule for own target there.
In email dated Вторник - 30 июня 2015 19:57:44 user Baptiste Clenet
Hi,
Ahoy,
as suggested by olmari, I'm summing up my problems/experience to
hopefully
get this running for me as well as anyone else having this kind of
problem.
In short: I've be trying and failing for more than 4 days now to use a
4G/LTE
Stick as WAN device using NCM and wwan0
From: Tom Deng 2579131...@qq.com
Adding support for OYE-0001 Wireless Router.
OYE-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng 2579131...@qq.com
---
Index:
While working with 'tc' we found something strange:
Our filters apply without errors, but we cannot see
them with 'tc filter show dev $dev'.
Also when running 'tc monitor' in another terminal, we
only see 'qdisc' related things, but not filters.
It seems that it happens from r37xxx till
21 matches
Mail list logo
