This adds support for the Mikrotik SXT-R LTE device, which is an
outdoor router that hosts an LTE modem mini PCIe card for its WAN
connection. The LTE antenna system claims a 9 dBi gain.
Hardware:
- SoC: QCA9531
- Flash: 16 MiB SPI NOR
- RAM: 64 MiB DDR2
- WiFi: None (no antenna i
On 11.02.2022 19:21, Rafał Miłecki wrote:
From: Rafał Miłecki
1. Clean "rootfs_data" manually as bcm4908 doesn't use nand.sh helpers
2. Update image sequence in rootfs_data to make overlay_verify accept it
3. Set CI_UBIPART to make nand_do_upgrade_success() (re)store backup
Signed-off-by: Rafa
On 5.01.2022 23:16, Rafał Miłecki wrote:
From: Rafał Miłecki
1. Create "rootfs_data" dynamicaly
U-Boot firmware images can contain only kernel and rootfs volume
(squashfs in case of OpenWrt). There is no way to include "rootfs_data"
UBI volume or make firmware file tell U-Boot to create one.
On 4.01.2022 23:46, Rafał Miłecki wrote:
From: Rafał Miłecki
This results in calling /usr/libexec/overlay_verify which may either
modify overlay (e.g. wipe it) or refuse it. It's needed by targets that
need to validate that "rootfs_data" doesn't come from a previous
firmware. They may provide a
Dear all,
as discussed during our last member meeting, there is now a feature freeze in
place! Please don't commit any major changes until the planed branch around
March 20th.
After the branch heavy changes (i.e. Kernel 5.15) can be merged, for now we
should work on bugs and finish up `firewal
This adds support for the Renkforce WS-WN530HP3-A ceiling-
mountable Wireless Access Point, which is powered over PoE.
Hardware:
- SoC: Mediatek MT7621DAT
- RAM: 128MiB on SoC
- Flash: 16MiB GigaDevice GD25Q128C
- 2.4Ghz Wifi: Mediatek MT603EN
- 5GHz Wifi: M
From: Rafał Miłecki
This is a step forward in adding support for devices with U-Boot.
Signed-off-by: Rafał Miłecki
---
target/linux/bcm4908/image/bootfs-generic.its | 35 +--
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/target/linux/bcm4908/image/bootfs-generi
Bjørn Mork [2022-01-23 14:26:18]:
Hi,
> OpenWrt is a rather small project, so it would make sense to piggy-back
> on someone with a bit more manpower. salsa.debian.org comes to mind...
IIRC it was already proposed in the past already. I'll include following note
for future myself:
Sun, 27 Feb
From: Rafał Miłecki
New BCM4908 devices come with U-Boot instead of CFE. Firmwares for such
devices has to include U-Boot.
Signed-off-by: Rafał Miłecki
---
package/boot/uboot-bcm4908/Makefile | 48
...ow-to-complete-build-even-with-ad-ho.patch | 40 ++
..