Panasonic Switch-M8eG PN28080K is a 8 + 1 port gigabit switch, based on
RTL8380M.
Specification:
- SoC : Realtek RTL8380M
- RAM : DDR3 128 MiB (Winbond W631GG8KB-15)
- Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G)
- Ethernet : 10/100/1000 Mbps x8 + 1
- por
The system status LED on Panasonic Switch-M8eG PN28080K is connected to
a PCA9539PW. To use the LED as a status LED of OpenWrt while booting,
enable the pca953x driver and built-in to the kernel.
Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO.
Signed-off-by: INAGAKI Hiroshi
This is a continuation of the PR in GitHub[1] and v1 patch series.
This patch series adds support for Panasonic Switch-M8eG PN28080K.
Panasonic Switch-M*eG PN28xx0K series has the following models:
- Switch-M8eG PN28080K (RTL8380M, 8 + 1 SFP)
- 1-9 : RTL8380M (SoC)
- Switch-M16eG PN28160K (RT
Oops, I forgot to update the title of this commit...
I'll fix and re-send, please ignore this series. Sorry for noise...
Regards,
Hiroshi
On 2022/03/09 21:52, INAGAKI Hiroshi wrote:
The system status LED on Panasonic Switch-M8eG PN28080K is connected to
a PCA9539PW. To use the LED as a status
Panasonic Switch-M8eG PN28080K is a 8 + 1 port gigabit switch, based on
RTL8380M.
Specification:
- SoC : Realtek RTL8380M
- RAM : DDR3 128 MiB (Winbond W631GG8KB-15)
- Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G)
- Ethernet : 10/100/1000 Mbps x8 + 1
- por
The system status LED on Panasonic Switch-M8eG PN28080K is connected to
a PCA9539PW. To use the LED as a status LED of OpenWrt while booting,
enable the pca953x driver and built-in to the kernel.
Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO.
Signed-off-by: INAGAKI Hiroshi
This is a continuation of the PR in GitHub[1] and v1 patch series.
This patch series adds support for Panasonic Switch-M8eG PN28080K.
Panasonic Switch-M*eG PN28xx0K series has the following models:
- Switch-M8eG PN28080K (RTL8380M, 8 + 1 SFP)
- 1-9 : RTL8380M (SoC)
- Switch-M16eG PN28160K (RT