On Sat, Jan 16, 2016 at 10:48 PM, Daniel Schwierzeck
wrote:
> Am Samstag, den 16.01.2016, 21:17 +0100 schrieb Martin Blumenstingl:
>
>> So compared to your patch the final list of changes is:
>> - INIT_COMPLETION -> reinit_completion
>> - use clk_get_fpi()
>> - of_device_id for "lantiq,spi-xrx100"
Am Samstag, den 16.01.2016, 21:17 +0100 schrieb Martin Blumenstingl:
> So compared to your patch the final list of changes is:
> - INIT_COMPLETION -> reinit_completion
> - use clk_get_fpi()
> - of_device_id for "lantiq,spi-xrx100"
>
> I only have three small questions left:
> - The "spi_frm" inte
On Sat, Jan 16, 2016 at 7:07 PM, Daniel Schwierzeck
wrote:
> If you use native CS, you should use the same numbering as in the
> datasheet:
>
> &spi {
> ...
> spi-nor@4 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-
Am Samstag, den 16.01.2016, 18:03 +0100 schrieb Martin Blumenstingl:
> On Sat, Jan 16, 2016 at 4:34 PM, Daniel Schwierzeck
> wrote:
> > nice, thanks for testing :)
> Thanks for writing nice patches ;-)
>
> > > - replace INIT_COMPLECTION with reinit_completion (this is due
> > > the
> > > newer ke
On Sat, Jan 16, 2016 at 4:34 PM, Daniel Schwierzeck
wrote:
> nice, thanks for testing :)
Thanks for writing nice patches ;-)
>> - replace INIT_COMPLECTION with reinit_completion (this is due the
>> newer kernel version in OpenWrt)
>> - use clk_get_fpi() to obtain the FPI clock (horrible, I am cur
Am Samstag, den 16.01.2016, 15:39 +0100 schrieb Martin Blumenstingl:
> Hi Daniel,
>
> On Sat, Jan 16, 2016 at 1:06 AM, Martin Blumenstingl
> wrote:
> > > It is a complete rewrite with DT support and runs against the UGW
> > > -6.1.1
> > > kernel. Unfortunately I hadn't time yet to adapt and test
Hi Daniel,
On Sat, Jan 16, 2016 at 1:06 AM, Martin Blumenstingl
wrote:
>> It is a complete rewrite with DT support and runs against the UGW-6.1.1
>> kernel. Unfortunately I hadn't time yet to adapt and test it with
>> OpenWRT. Maybe you want to volunteer for that ;)
> Thanks for this update! I am
Hi Daniel,
On Wed, Jan 13, 2016 at 9:05 PM, Daniel Schwierzeck
wrote:
> could you retry with the attached driver?
>
> It is a complete rewrite with DT support and runs against the UGW-6.1.1
> kernel. Unfortunately I hadn't time yet to adapt and test it with
> OpenWRT. Maybe you want to volunteer
Hi Martin,
Am Mittwoch, den 13.01.2016, 20:23 +0100 schrieb Martin Blumenstingl:
> Hi John,
>
> On Mon, Jan 11, 2016 at 3:25 PM, Martin Blumenstingl
> wrote:
> > Here's the kernel log from the TD-W8970:
> > https://paste.kde.org/pia7p73i9
> > I have debugged it and split_tplink_kernel gets 0x20
Hi John,
On Mon, Jan 11, 2016 at 3:25 PM, Martin Blumenstingl
wrote:
> Here's the kernel log from the TD-W8970: https://paste.kde.org/pia7p73i9
> I have debugged it and split_tplink_kernel gets 0x2 as offset and
> 0x7A as size (which looks correct). However, when mtd_read tries to
> read
Hello,
this series adds linux 4.4 support to the lantiq target.
It depends on the linux/generic 4.4.0 update because -rc8 contains a
build-fix for MIPS devices.
I have tested it on two (VRX200) devices:
- VGV7510KW22 (seems to work fine)
- TD-W8970 (the mtd_reads in mtd_split seem to only return
11 matches
Mail list logo