I don't think this is the right forum for this question, since it doesn't seem
related to OVS. However, if I were to speculate, my guess is that the
forwarding ASIC doesn't support modifying the ToS bits, so the packets are
being forwarded to the management CPU to handle these packets. You cou
Hi
We are working on a research project that involves HP OpenFlow-enabled
switch (HP 3500 yl). We are facing some issues with performance
particularly when operating the switch in "OpenFlow" mode. The switch is
controlled via a desktop running the Ryu controller.
The rules on the switch match pa
On Wed, Jun 28, 2017 at 08:52:56AM +0430, Tahereh Yaghoubi wrote:
> I want to collect of_port information from ovs switches. But in its reply,
> value of max_speed is set to 0 and value of curr_speed is set to 10M while
> I can receive ofp_port_stats correctly. Also I can ping all hosts. In my
> mi
sorry, it is a obvious mistake in writing. and after I corrected it, this
cmdline didn't work.
# ovs-vsctl add-port br0 dpdk-p0 -- set Interface dpdk-p0 type=dpdk
options:dpdk-devargs=:83:00.0ovs-vsctl: Error detected while setting up
'dpdk-p0': Error attaching device ':83:00.0' t
On Wed, Jul 12, 2017 at 01:20:32PM +0300, Aleksey Khalikov wrote:
> Hi guys,
>
> My scenario is as follows:
>
> OVS 2.7.90 with two dpdk ports connected to IXIA two dedicated ports.
>
> From IXIA port1 I send double-tagged traffic to port2. I am trying to remap
> inner and outer tags of the fram
On Wed, Jul 12, 2017 at 10:54:34AM -0700, Joe Stringer wrote:
>
> Hi Jean,
>
> There's no native integration, but I could imagine that if Netfilter
> ran on the packets first then modified the skb mark field, then OVS
> ran later on that packet then plausibly you could match on the
> pkt_mark.
Hi,
I am debugging failures in OpenStack Neutron functional tests. The sequence of events is the following:
1) An interface is added successfully to a bridge
2) The addition of the interface is logged by ovs-vswitchd
3) The test fails because it cannot find the interface when trying to move
On 7 July 2017 at 15:20, Jean Tourrilhes wrote:
> Hi,
>
> I want to classify/match packets in OVS based on some TCP
> options, this is currently not supported by OVS but it is supported by
> netfilter. The support for ConnTrack left me wondering if I could use
> netfilter to match
On Tue, Jul 11, 2017 at 07:05:15PM +, Михаил Аграновский wrote:
> 1. OvS supports BFD. Does OvS react somehow on change of BFD session state?
> Does BFD connection fault means something for OpenFlow-driven part of OvS?
>
> 2. In general, I consider OvS as switch side for SD-WAN solution. Thus,
Thanks for reply. All I've got from your link is that Ryu team implemented
establishing of BFD sessions between Ryu and whatever: controller
<--[bfd]--> switch.
In opposite, I'm asking about reacting on BFD session change *inside* OvS.
All I've got from ovs mans and sources is that I can run BFD an
http://pcapr.net/home has tons of pcaps of real network traffic. As to the
rest of it, it sounds like you need to spend a lot of time with google and
develop some specific questions. You probably want to start with mininet.
https://www.youtube.com/watch?v=om4YzNSXI4E
On Wed, Jul 12, 2017 at 4:52
On Wed, Jul 12, 2017 at 04:21:04PM +0800, Sam wrote:
> hi all,
>
> I'm running ovs-dpdk(ovs-2.4.9), I found the counter of bond port of br_t
> is increasing, but I want to know what's these packets, how could I do this?
>
> first, I use `ovs-ofctl snoop br_t`, but it quit quickly as below:
>
> >
Regards
_Sugesh
From: ovs-discuss-boun...@openvswitch.org
[mailto:ovs-discuss-boun...@openvswitch.org] On Behalf Of lvzhil...@ncic.ac.cn
Sent: Wednesday, July 12, 2017 10:31 AM
To: ovs-discuss
Subject: [ovs-discuss] error: "Error attaching device ':83:00.0' to DPDK"
Hello,
I have instal
On Wed, Jul 12, 2017 at 11:40:41AM +0300, Sara Gittlin wrote:
> Thank you Ben
>
> >> I need a tool to feel up the flow tables in ofproto.
> >> do you know what tool/other should i use ?
>
> >What does it mean "to feel up" a flow table?
>
> i want to be able to read ofctl tables and to get a big
Hello,
I have installed OVS 2.7 running. When I do:
# ovs-vsctl add-port br0 dpdk-p0 -- set Interface dpdk-p0
type=dpdk options:dpdk-devargs=:82:00.0
ovs-vsctl: Error detected while setting up 'dpdk-p0': Error attaching
device ':82:00.0' to DPDK. See ovs-vswitchd log for details.
here is
You can use dpdk tool 'pdump' to capture packets
http://dpdk.org/doc/guides-16.07/sample_app_ug/pdump.html
在 2017/7/12 16:21, Sam 写道:
> hi all,
>
> I'm running ovs-dpdk(ovs-2.4.9), I found the counter of bond port of br_t
> is increasing, but I want to know what's these packets, how could I do thi
Hi guys,
My scenario is as follows:
OVS 2.7.90 with two dpdk ports connected to IXIA two dedicated ports.
From IXIA port1 I send double-tagged traffic to port2. I am trying to
remap inner and outer tags of the frames with group chaining and at last
send it out to port 2 of the OVS.
I issue
Hello,
I need a real dataset of network traffic with diverse matching fields.
this is required for 2 different tasks
based on this dataset i need to populate :
- openflow tables in userspace (task 1)
- datapath cache (task 2)
my questions :
- is there any dataset available?
- how to
Thank you Ben
>> I need a tool to feel up the flow tables in ofproto.
>> do you know what tool/other should i use ?
>What does it mean "to feel up" a flow table?
i want to be able to read ofctl tables and to get a big output ~ 1
- 5 flows.
i need it to order to run some algo. on these fl
hi all,
I'm running ovs-dpdk(ovs-2.4.9), I found the counter of bond port of br_t
is increasing, but I want to know what's these packets, how could I do this?
first, I use `ovs-ofctl snoop br_t`, but it quit quickly as below:
> [root@yf-mos-test-net07 ~]# /usr/local/bin/ovs-ofctl snoop
> /usr/lo
20 matches
Mail list logo