On Thu, Feb 21, 2013 at 3:06 PM, Donald Stahl wrote:
>> On the one hand, you say OraListener1 and OraInstance1 need to be on
>> the same node, but on the other you say they can start/stop
>> individually.
>
> There are maintenance reasons for some of these requirements- for
> example the listener
> On the one hand, you say OraListener1 and OraInstance1 need to be on
> the same node, but on the other you say they can start/stop
> individually.
There are maintenance reasons for some of these requirements- for
example the listener can only ever be on the same box as the database,
but I might
On Thu, Feb 21, 2013 at 1:51 PM, Donald Stahl wrote:
>> shouldn't be too hard
> Whenever you make something idiot proof, the universe invents a bigger idiot.
:)
> I'm that idiot I guess.
Have you seen clusters from scratch?
Its a pretty good starting point.
>> use colocation constraints for th
> shouldn't be too hard
Whenever you make something idiot proof, the universe invents a bigger idiot.
I'm that idiot I guess.
> use colocation constraints for the things that need to run on the same node
Except colocation resources also include order unless you specifically
tell it that the items
On Thu, Feb 21, 2013 at 7:49 AM, Donald Stahl wrote:
> SUSE 11-SP2 with pacemaker-1.1.6-1.27.26
>
> I apologize if this is obvious or has been answered before but my
> foogle-fu is failing me.
>
> I'm trying to create a resource dependency tree similar to this one from VCS:
>
> // resource depende
Ich werde ab 21.02.2013 nicht im Büro sein. Ich kehre zurück am
22.02.2013.
Please note, that I am not available. Please always use
"ksi.netw...@knapp.com", which ensures that one of our network
adminsitrators takes care of your interest. If you need operating system
support please contact ksi..
On Wed, Feb 20, 2013 at 10:17 PM, Mario Penners wrote:
> Hello,
>
> during a security audit, our customer was wondering about the files in
> directory /var/lib/heartbeat/crm, for example:
>
> -rw-rw-rw- 1 hacluster root 32 Feb 13 18:59 cib-40.raw.sig
> -rw--- 1 hacluster root 6716 Feb 13 18:
On Thu, Feb 21, 2013 at 3:12 AM, Lars Marowsky-Bree wrote:
> On 2013-02-19T16:23:12, Dan Frincu wrote:
>
>> > service {
>> > # Load the Pacemaker Cluster Resource Manager
>> > ver:0
>>
>> Change this to ver: 1, have pacemaker start from the init script.
>> For more d
SUSE 11-SP2 with pacemaker-1.1.6-1.27.26
I apologize if this is obvious or has been answered before but my
foogle-fu is failing me.
I'm trying to create a resource dependency tree similar to this one from VCS:
// resource dependency tree
group oracle01
{
Oracle OraInstance1
{
Mount OraBi
> Not using the crm shell, but cibadmin can do this via an xpath query.
> For example:
>
> # cibadmin -Ql -A "//primitive[@type='o2cb']"
>
> Modify to taste.
I was hoping to avoid having to parse XML but if that's the only
option then that's what I'll use.
Thanks,
-Don
___
Hi'
I got that explanation offline of the mailing list as well :-) :-). Still
thanks a very lot for the explanation.
Best regards.
Thomas.
Fra: Jake Smith
Til: Thomas Lorenzen ; The Pacemaker cluster resource
manager
Sendt: 21:04 onsdag den 20. februar 2
- Original Message -
> From: "Thomas Lorenzen"
> To: m...@sys4.de, "The Pacemaker cluster resource manager"
>
> Sent: Wednesday, February 20, 2013 2:39:15 PM
> Subject: Re: [Pacemaker] Putting a node to standby stops resources on
> the other node
> Hi'
> Bingo, that seems to work. St
Hi'
Bingo, that seems to work. Still, I find it somewhat unexpected, that the order
matters in such a colocation rule. Anyway, things now seems to work as
expected. Thanks a very lot.
Best regards.
Thomas.
Fra: Michael Schwartzkopff
Til: Thomas Lorenzen ;
Am Mittwoch, 20. Februar 2013, 17:54:49 schrieb Thomas Lorenzen:
> Hi'
>
> My setup is a simple two cluster solution intended for a "master" "backup"
> framework, where I would like to assign floating ip addresses on two
> network interfaces for both the master and the backup.
>
> The most cricia
Hi'
Sorry, I do have that setting active. Properties are as follows.
property $id="cib-bootstrap-options" \
dc-version="1.1.6-9971ebba4494012a93c03b40a2c58ec0eb60f50c" \
cluster-infrastructure="Heartbeat" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy
Am Mittwoch, 20. Februar 2013, 17:54:49 schrieb Thomas Lorenzen:
> Hi'
>
> My setup is a simple two cluster solution intended for a "master" "backup"
> framework, where I would like to assign floating ip addresses on two
> network interfaces for both the master and the backup.
>
> The most cricia
Hi'
My setup is a simple two cluster solution intended for a "master" "backup"
framework, where I would like to assign floating ip addresses on two network
interfaces for both the master and the backup.
The most cricial part of the config is as follows.
group backup backup_ip_intern backup_ip_
On 2013-02-20T10:43:57, Andrew Beekhof wrote:
> > Some fence agents can have 'reboot' implemented without OFF/ON procedure
> > (direct usage of command 'reboot') for these multiple plug should be
> > forbidden.
> Could we not fall back to off off on on ?
Some of those devices however also suppor
On 2013-02-19T15:42:21, Donald Stahl wrote:
> Is there some way of listing all resources that use a specific
> resource agent using crm shell?
Not using the crm shell, but cibadmin can do this via an xpath query.
For example:
# cibadmin -Ql -A "//primitive[@type='o2cb']"
Modify to taste.
Reg
On 2013-02-19T16:23:12, Dan Frincu wrote:
> > service {
> > # Load the Pacemaker Cluster Resource Manager
> > ver:0
>
> Change this to ver: 1, have pacemaker start from the init script.
> For more details on why you should use ver:1 read
> http://theclusterguy.clust
Hello,
during a security audit, our customer was wondering about the files in
directory /var/lib/heartbeat/crm, for example:
-rw-rw-rw- 1 hacluster root 32 Feb 13 18:59 cib-40.raw.sig
-rw--- 1 hacluster root 6716 Feb 13 18:59 cib-41.raw
-rw-rw-rw- 1 hacluster root 32 Feb 13 18:59 cib-41.r
I'll go for the automatic solution.
Thanks for the help.
-Original Message-
From: Andrew Beekhof [mailto:and...@beekhof.net]
Sent: Wednesday, February 20, 2013 10:50 AM
To: The Pacemaker cluster resource manager
Subject: Re: [Pacemaker] Monitor process, migrate only ip resources
On Wed,
On Wed, Feb 20, 2013 at 8:07 PM, Grant Bagdasarian wrote:
> Yes, you are correct. I manually stopped kamailio and messed with its config
> script so it would not start again.
> The resources were migrated to the secondary node =). Awesome piece of
> software!
>
> So in theory I now have a broken
Yes, you are correct. I manually stopped kamailio and messed with its config
script so it would not start again.
The resources were migrated to the secondary node =). Awesome piece of software!
So in theory I now have a broken primary server which I should fix. Once fixed,
how will the resource
On Wed, Feb 20, 2013 at 7:46 PM, Florian Crouzat
wrote:
> Le 20/02/2013 09:07, Grant Bagdasarian a écrit :
>>
>> 3)When I only stop the kamailio process on the primary node, the process
>>
>> is restarted again. Which is also good, but I thought it would migrate
>> everything to the secondary node
Le 20/02/2013 09:07, Grant Bagdasarian a écrit :
3)When I only stop the kamailio process on the primary node, the process
is restarted again. Which is also good, but I thought it would migrate
everything to the secondary node when the kamailio process stopped.
Pacemaker always tries to restart
Hi, Michael
2013/2/15 Michael Wagner :
> Hi,
>
> I am currently working on a geo-redundant setup with two sites and one
> arbitrator, using booth as ticket manager.
>
> In case of network-outages, or a whole site is down, booth correctly grants
> the ticket to the other site (where pacemaker the
Hi,
On Tue, Feb 19, 2013 at 10:42 PM, Donald Stahl wrote:
> Is there some way of listing all resources that use a specific
> resource agent using crm shell?
>
> For example:
>
> # crm resource list
> stonith-sbd(stonith:external/sbd) Started
> IP1 (ocf::heartbeat:IPaddr2) Started
> IP2 (oc
Hello,
I've configured it in a lab and the outcome is as following:
1) When I restart/stop the heartbeat process the IP and kamailio process
are started on the secondary node. Which is good.
2) When I reboot/shutdown the whole server the IP and kamailio process are
started on the s
29 matches
Mail list logo
