Hi,
You probably need one bolt there - I think an m6 x 25mm would work.
Something like this:
https://www.perennialcycle.com/fork-crown-bolt-kit-fender-light-mounting.html
You can probably find the bolt at any decent hardware store. Good luck.
M
On Sunday, January 1, 2023 at 12:06:02 PM UTC-5 r
You don’t need a recessed nut. Just go down to your local hardware store
and get a bolt long enough with a nylock nut. And a couple of washers.
Should cost you less than $5. I’d get stainless as well.
On Sunday, January 1, 2023 at 2:48:34 PM UTC-7 Michael Morrissey wrote:
> Hi,
>
> You probabl
I agree that the Sheldon's nut works great...looks cleanand allows to
easily remove and replace the fenders if you need/want to.
On Sunday, January 1, 2023 at 12:06:02 PM UTC-5 rmro...@gmail.com wrote:
> Or, any bike not currently using the center brake mount hole on the fork.
> Here I am w
Nopers, the flat washer will butt up against that lip at the back of the
fork easy peasy. The only reason it's recessed is the fork crown was
designed to be used on caliper brake bikes, too, which uses the recess. You
have the parts you need, no worries.
On Sunday, January 1, 2023 at 3:00:39 P
SKS doesn't provide recessed nuts, correct. Sure you can buy a recessed
nut, but the path of least resistance is going to the hardware store for
the parts as Hoch suggested. AliExpress shipping from China takes forever.
Recessed nuts nuts work great for brakes as it helps keep from rotating,
an