Hi All,
Any trick methods to keep a SQflex running on AC power at a given flow rate
that is less than full power?
I’ve got a well that is just on 1 gpm, around 150’ lift.
the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265 watts.
thx
jay
peltz power
If its broke hope its still in warrantee
Good luck
On Jun 28, 2016 6:37 AM, "Jason Szumlanski" <
ja...@floridasolardesigngroup.com> wrote:
> I'm heading out on my first K1-Open fault code on a SMA inverter. Any tips
> for diagnostic steps and likely outcome? I'm dreading the call to SMA based
>
Hello Jason,Just a bit late on this one but for what it's worth;I would inquire with the end-user if there was any abnormal AC issues that caused the Inverter to error-out with AC type errors(VAC, FAC) prior to this K1-open error.Many times these abnormalities can then generate a false K1-open
Yes, mounting bracket (top and bottom)
It's not the easiest inverter to mount without the factory supplied
brackets, and I'm up against one that was removed and requires
re-installation.
On Thu, Jun 30, 2016 at 10:36 AM, frenergy wrote:
> do you mean a mounting bracket?
do you mean a mounting bracket? I can't remember if the mounting
brackets are the same for all sizes of IGs
On 6/30/2016 7:22 AM, Jason Szumlanski wrote:
Anyone know where I can get a replacement bracket set for an IG5000?
Jason Szumlanski
Florida Solar Design Group
Anyone know where I can get a replacement bracket set for an IG5000?
Jason Szumlanski
Florida Solar Design Group
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
We have observed exactly that phenomenon on some Canadian modules that are
a couple of years old, but connected to a string inverter. We used an IV
curve tracer to test all of of the modules and they tested out fine. That
system actually has an expansion with Suniva modules and the Canadians
Visiting a Canadian Solar array we put up a couple years ago, where there
appears to be 1/32” wide tracks crossing cells on several of the modules, (look
like little worm holes) branching and in one module they are particularly thick
just over an Enphase 215. Tracings in a few spots are
8 matches
Mail list logo