I am seeking advise ...but if I can be pointed to the right direction, I will
be most appreciative.
This summer, I plan to take down my Cellwave Station Master (repeater antenna)
for service, maintenance or painting.
Over the years, moss and algae set in and the bright white fiberglass finish
I enjoyed transacting with air.com with Sid Cohen...go out his way to help you
out..Lately the atmosphere (customer relation) at air.comm is totally
different...I am not sure that Sid Cohen is still around. I will dig up their
phone contact.
\
csi
--- On Tue, 9/16/08, skipp025 <[EMAIL PROTECT
The Island Way:
I used my IC-28H..(mobile) .which has "led bars" on rx signal strength. I
drove around the island and map out receptions on strategic points. Clients
are satisfied that a 15-watts tx at repeater site covered the whole island (32
square miles). Repeater located at cente
I have access to IC 28h mobiles and intend to make a repeater out of two
mobiles.
...not for heavy use...but casual ...club use...5-10 watts tx. will be
sufficient
...will be powered by solar
...not too sure whether to use duplexer or two antenna
...to make it portable to readily move
I am grateful to all who pointed out ...heads-up... on using 9913...I was just
pointing out what I have in preparation...In actuality we do have sufficient
run of Andrew Heliax of which we will eventually use.
thanks
csi
Chuck Kelsey <[EMAIL PROTECTED]> wrote:
About twice a month thi
ontroller sounds as if you are trying to use "get input/key tx".
Wonder if you are going to use an IDer??? Might also consider some type of
remote control, but your application might have a control op at the repeater
when in op.
73, ron, n9ee/r
>From: chris Inos
>Date: 20
For our American Red Cross use...local chapter
We are in a project to make a simple repeater from two IC H-16 VHF (donation)
to assist us in our immediate response in a small community (outside of
continental U.S.).
1. We are looking for a simple controller, no bells and whistles,, just t
would like to paint a cellwave stationmaster...any recommendation as to what would be a fitting paint and where to procure it? thanks chris
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
YAHOO! GROUPS LINKS
JOE:I am toying around with the repeater-maker "SR4-D". I have this equipment now for more than 15 years. Is sleeps and can be awaken by certain command... csiJoe <[EMAIL PROTECTED]> wrote: I guess my question would be: Why pick this means of control when there are so many other better w
people from avionics are quick to come to the rescue for someone looking for help..and not spend times with "Unpallatable Dry Jokes" Chris Honolulu, HawaiiChris: Lucky you. :-)Joe M. Yahoo! Groups Links<*> To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-
Joe M. I do not think so...this is a well control group...something like one big family ...not more than 10 users...each one look-out for the other.. outside the continental us...in an island of 3000 people. thanks for your contribution. csimch <[EMAIL PROTECTED]> wrote: I imagine the kerc
11 matches
Mail list logo