other.
73 - Jim W5ZIT
--- On Wed, 11/18/09, Eric Lemmon wb6...@... wrote:
From: Eric Lemmon wb6...@...
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse
burst
To: [5]repeater-buil...@yahoogroups.com
mailto:Repeater-Builder%40yahoogroups.com
Date: Wednesday, November 18, 2009, 1
Eric Lemmon wrote:
The TS-64 does indeed encode a reverse burst STE signal. Unfortunately, it
has the 180-degree phase shift, because that is really easy to do. It
cannot encode a 120-degree phase shift, so that means it is fairly useless
with Motorola and a few other radio brands. When I
Thanks for the useful info. Very interesting. On a somewhat similar topic, we
ran into a situation where the local Motorola shop sold a local entity a
repeater and several portables using a DPL code that only certain models of
Motorola have. We checked every Kenwood, Vertex, and even some other
I've gone so far as to make a couple of changes to a Motorola MSR2000 to not
send reverse burst, and hold the transmitter a little longer than a normal
reverse burst -- that is to say, chicken burst. That was a different
application, what I'll do next time I deal with a Micor or MSR with a
wspx472 wrote:
Thanks for the useful info. Very interesting. On a somewhat similar
topic, we ran into a situation where the local Motorola shop sold a
local entity a repeater and several portables using a DPL code that
only certain models of Motorola have. We checked every Kenwood,
Vertex,
wb6...@... wrote:
From: Eric Lemmon wb6...@...
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse burst
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, November 18, 2009, 1:09 PM
Â
You have discovered one of many dirty
From my experience, the Model 38 and 48 will not do reverse burst.
I did however use a Arcomm audio delay board and accomplished the same results.
http://www.arcomcontrollers.com/rc210/rad.html
Then I decided I want a repeater controller capable of additional ports and
dropped the Model 48 I
Anybody have a 38Max they want to sell me cheap? (he he... now that we're on an
anti-Zetron thread :) :)
On Nov 19, 2009, at 9:13 AM, wb0vhb wrote:
From my experience, the Model 38 and 48 will not do reverse burst.
I did however use a Arcomm audio delay board and accomplished the same
19, 2009 6:47 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Zetron 38A not sending reverse burst
I tried that but decided not to go that route for now. The reason is that I
need that hang time to tell how well I am hearing the repeater.
It is 900 MHz and users
Thanks for the reply. The 38A sounded really good until I started to try to
program and install it. The more I fool with the thing, the less I like it.
After getting all my levels set up, I sent varying frequencies starting at 200
HZ and going to 3 KHz to check the response. I noticed a roll
10 matches
Mail list logo