OK. I changed the servers to datamerge.local in my phone
profiles. The Polycoms immediately worked and their MWI
lights now flash. The Aastras don't understand DNS SRV
records, so they couldn't even logon. OK, I thought. I will
use the outbound proxy settings to point them by FQDN and
leave the
Homer is now working (mostly) in 4.6.
However, I see two issues. One is a frustration, the other a
bit more serious.
The first issue is that although Homer correctly shows the
local time on its web page and the search output has all the
correct timezone, the actual search window is taking time
Mark,
Please create a jira for the missing packets. I'll spend some time
looking into it.
On 07/30/2012 03:12 PM, Mark Dutton wrote:
Homer is now working (mostly) in 4.6.
However, I see two issues. One is a frustration, the other a
bit more serious.
The first issue is that although
Michael,
Try the latest RPM from the repo and set the these values in the proxy
config
SIPX_TRAN_HOOK_LIBRARY.100_sipheadercheck :
/usr/lib64/transactionplugins/libSipHeaderCheck.so
SIPX_TRAN.100_sipheadercheck.REMOVE_ACCEPT_LANGUAGE : true
On Mon, Jul 30, 2012 at 3:12 AM, Mark Dutton repl...@datamerge.com.au wrote:
The first issue is that although Homer correctly shows the
local time on its web page and the search output has all the
correct timezone, the actual search window is taking time in
GMT. I am in Western Australia which
Done. XX-10333
--
Regards
Mark Dutton
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Thanks. I took hold of the ticket. Make sure you also make a separate
jira for the timezone issue.
On 07/30/2012 06:14 PM, Mark Dutton wrote:
Done. XX-10333
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive:
I reported that the hunt groups were erratic last week and
as of today's build they are working properly as configured
in the setup screens.
I thought I would be clever and try to create a scenario
where ringing into a hunt group we could create an add on
effect.
I did this by having initial
On 7/30/12 5:04 AM, Joegen Baclor wrote:
This should give you back cisco blind transfers.
Thanks, I'll give it a try, but more importantly, are holds.
If someone puts someone on hold (hold:), or trys to conferencing someone
in, they get lost.
(or I just scrap the cisco's, but someone really
On 7/29/12 5:45 PM, Tony Graziano wrote:
use an ata that does t.38 instead of g711 and that problem will fix
itself.
who has a good two port t.38 TA?
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259
*| *SECNAP Network Security Corporation
* Best Mobile Solutions Product of 2011
or better yet, just document what works and what doesn't... not much
different than some other SIP phones... not everybody follows standards.
Mike
On Mon, Jul 30, 2012 at 7:11 AM, Michael Scheidell
michael.scheid...@secnap.com wrote:
**
On 7/30/12 5:04 AM, Joegen Baclor wrote:
This
this shouldn't work... you shouldn't be able to have 200 back in the list
with the current hunt group app...
well, at least this never did work ;-)
On Mon, Jul 30, 2012 at 7:24 AM, Mark Dutton repl...@datamerge.com.auwrote:
I reported that the hunt groups were erratic last week and
as of
I am only aware of blind transfer and ha support for cisco getting fixed
by these params. Josh has better insight on this. Lets see if he
chimes in.
On 07/30/2012 07:11 PM, Michael Scheidell wrote:
On 7/30/12 5:04 AM, Joegen Baclor wrote:
This should give you back cisco blind transfers.
Remotes wont work, hold doesn't work, transfers don't work, blind transfers
don't work, conference calls don't work. Mwi doesn't work right . I have not
tested the web interface lately but you can't put enough characters in a couple
of the fields, and 1 of the other fields, the domain field
well, hold is essentially a transfer...
On Mon, Jul 30, 2012 at 7:37 AM, Joegen Baclor jbac...@ezuce.com wrote:
I am only aware of blind transfer and ha support for cisco getting fixed
by these params. Josh has better insight on this. Lets see if he chimes
in.
On 07/30/2012 07:11 PM,
You cannot re-ring an extension in a hunt group. See the wiki please.
On Jul 30, 2012 7:11 AM, Mark Dutton repl...@datamerge.com.au wrote:
I reported that the hunt groups were erratic last week and
as of today's build they are working properly as configured
in the setup screens.
I thought
Patton SN4522JSEUI
On Jul 30, 2012 7:19 AM, Michael Scheidell michael.scheid...@secnap.com
wrote:
**
On 7/29/12 5:45 PM, Tony Graziano wrote:
use an ata that does t.38 instead of g711 and that problem will fix
itself.
who has a good two port t.38 TA?
--
Michael Scheidell, CTO
o:
lots of this is being worked on... the difference is there's now a
commercial reason to work on it.
cisco phones as remotes probably will never work though.
yes, polycom's make life easier. but we've been saying that for many years
too...
mike
On Mon, Jul 30, 2012 at 7:47 AM, Michael
On 7/30/12 7:51 AM, Michael Picher wrote:
lots of this is being worked on... the difference is there's now a
commercial reason to work on it.
other thing to think about: FORCE the users to use ONE firmware
version. Cisco changed how they do things in each firmware version, and
what works
Well it's not stopping me, so maybe that is a bug.
Shame.
--
Regards
Mark Dutton
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
don't get me wrong, i'll take it if it works now... because it was never
allowed before (as tony stated).
hopefully one of the devs speaks up as to what may be allowing this.
mike
On Mon, Jul 30, 2012 at 8:37 AM, Mark Dutton repl...@datamerge.com.auwrote:
Well it's not stopping me, so
Actually, I just read the wiki. It states that if an
extension is used more than once the subsequent additions
will only ring once. This is not strictly the case. If the
same extension is used consecutively, it will only ring the
first time, but if it has a ringdown sequence between
iterations
realize that behavior can change dynamically, and is not recommended. the
way to handle this is to use separate lines on the phones that need to be
re'-rung as part of the hunt group until there is a better hunt group
capability. also realize there is openacd in 4.6 for inbound call handling
as an
I am not sure position announcement or wait time has been added yet. I am
not sure if this has been added to openacd yet either.
https://github.com/OpenACD/OpenACD/wiki/Cdr-and-agent-states
But since its a relatively new project, it could happen!
On Mon, Jul 30, 2012 at 11:39 AM, Mark Dutton
They did just that at CT Expo for awhile...
On Jul 29, 2012, at 15:48 , Michael Scheidell wrote:
And if wishes were horses my driveway would prolly be full of crap.
P s, there is an rfc that says the pigs will fly given enough thrust. -:)
___
From the freeswitch-users list
Wondering if anyone has seen an effect on sipx media services in 4.6?
Begin forwarded message:
From: Ken Rice kr...@freeswitch.org
Date: July 26, 2012 1:03:38 MDT
To: FreeSWITCH Users Help freeswitch-us...@lists.freeswitch.org
Subject: Re: [Freeswitch-users]
This is sort of not very helpful as a discussion goes.
While there may be some merit in this, noone on this list has complained of
performance issues on sipx 4.5/4/6 as it relates to freeswitch. Realize
sipxecs does not use all of the same freeswitch modules that most people
using freeswitch
Hi Users,
Does anyone know what the practical limit for BLA lines is in SIPX? I
get this message in the logs:
message queue 'AppearanceAgentTask-15' is over half full - count =
99, max = 100
Thanks!
Kyle
--
Kyle Haefner, M.S.
Communication Systems Programmer
Colorado State University
Fort
I tried to warn you all at CoLab :-P
On Fri, Jul 27, 2012 at 4:38 PM, Todd Hodgen thod...@frontier.com wrote:
BTW, lesson learned. If you enable Lynk, and you are using the TAPI
interface, it is disabled in Outlook by the Lync toolbar. Part of their
extending of the feature set I
ok, so i updated and now have the build dated today. i can search older
homer entries but not capturing new ones. don't know if this is worthy to
mention that I can search the old captures, but it is not correlating any
of the relevant data for any call id in particular. I.E. If I choose a
clle
I tested T.38 with 'faxzero' works fine.
but, if you use 'filesanywhere', you can upload your file, and fax it
(from your desktop, android, etc)
(i sent a 63 page fax to see what would happen.. worked fine, 29 mins
later :-)
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259
*|
mongo doesn't look right...
try:
bash -x /usr/bin/mongodb-repair
/etc/init.d/mongod start
On Mon, Jul 30, 2012 at 2:27 PM, Kurt Albershardt k...@nv.net wrote:
sipxconfig.log and tail of sipxagent.log (which was 2 MB) attached.
Updated via yum this morning and invoked 'sipxecs-setup
Somehow you might have double quotes around your host name. When
running sipxecs-setup, did you put double quotes around your host
name? Can you send me /etc/sipxpbx/sipxconfig.properties?
On Mon, Jul 30, 2012 at 2:27 PM, Kurt Albershardt k...@nv.net wrote:
sipxconfig.log and tail of
4.2.0, and 4.2.1, if I enabled recording on a conference line, (under
certain conditions I suppose), then everyone dialing in got 'You are the
only partitipant in this conference'
I could see in cdr, - active, everyone there, all showing they were in
the right conference, but no one heard
On Mon, Jul 30, 2012 at 2:16 PM, Tony Graziano tgrazi...@myitdepartment.net
wrote:
ok, so i updated and now have the build dated today. i can search older
homer entries but not capturing new ones.
probably because sipxhomer is dieing, see comment below
don't know if this is worthy to
in 4.4 moh general (system) is used for MOH in conferences. (system music
direcotry is: /var/sipxdata/mediaserver/moh, which should be user:group
sipxchange:sipxchange, the directory perms should be 0755 and files should
be 0644)
On Mon, Jul 30, 2012 at 2:46 PM, Michael Scheidell
Sure, i'll pound on it some this evening to try to track some of this down
and send it along.
On Mon, Jul 30, 2012 at 2:48 PM, Douglas Hubler dhub...@ezuce.com wrote:
On Mon, Jul 30, 2012 at 2:16 PM, Tony Graziano
tgrazi...@myitdepartment.net wrote:
ok, so i updated and now have the build
Attached, and shows double quotes. I'm guessing this is also the cause of what
I reported earlier:
One more minor glitch at the end of the script - looks like extra quotes in
the URL:
In a few more minutes you will be able to access the administration
interface from your web browser at
On 7/30/12 2:51 PM, Tony Graziano wrote:
in 4.4 moh general (system) is used for MOH in conferences. (system
music direcotry is: /var/sipxdata/mediaserver/moh, which should be
user:group sipxchange:sipxchange, the directory perms should be 0755
and files should be 0644)
I recorded a
On Mon, Jul 30, 2012 at 9:58 PM, Michael Scheidell
michael.scheid...@secnap.com wrote:
On 7/30/12 2:51 PM, Tony Graziano wrote:
in 4.4 moh general (system) is used for MOH in conferences. (system music
direcotry is: /var/sipxdata/mediaserver/moh, which should be user:group
user portal under inbox - conferences
On Mon, Jul 30, 2012 at 2:58 PM, Michael Scheidell
michael.scheid...@secnap.com wrote:
**
On 7/30/12 2:51 PM, Tony Graziano wrote:
in 4.4 moh general (system) is used for MOH in conferences. (system music
direcotry is: /var/sipxdata/mediaserver/moh,
it would be in the owners voicemail directory, not the systems moh. I
thought the question was about MOH.
On Mon, Jul 30, 2012 at 2:58 PM, Michael Scheidell
michael.scheid...@secnap.com wrote:
**
On 7/30/12 2:51 PM, Tony Graziano wrote:
in 4.4 moh general (system) is used for MOH in
did not add quotes -- and the URL at the end still has them:
[root@sipx ~]# sipxecs-setup --reset-all
This will wipe all configuration data from this server. Are you sure? [ enter
'y' or 'n' ] : y
Network settings:
IP address : 192.168.X.26
Would you like to configure your system's network
/var/sipxdata/mediaserver/data/mailstore/subscriber-number/conference
On Mon, Jul 30, 2012 at 2:59 PM, Tony Graziano tgrazi...@myitdepartment.net
wrote:
it would be in the owners voicemail directory, not the systems moh. I
thought the question was about MOH.
On Mon, Jul 30, 2012 at 2:58 PM,
On 7/30/12 2:59 PM, George Niculae wrote:
You should see it in user portal for conference owner, conference folder
cd /var/sipxdata... where?
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259
*| *SECNAP Network Security Corporation
* Best Mobile Solutions Product of 2011
*
you dont need to access the directory directly, it should be available via
the userui...
On Mon, Jul 30, 2012 at 3:00 PM, Tony Graziano tgrazi...@myitdepartment.net
wrote:
/var/sipxdata/mediaserver/data/mailstore/subscriber-number/conference
On Mon, Jul 30, 2012 at 2:59 PM, Tony Graziano
perhaps re-run the script and manually input the host and sipdomain
(instead of hitting enter) to see if it removes the quotes.
On Mon, Jul 30, 2012 at 2:59 PM, Kurt Albershardt k...@nv.net wrote:
did not add quotes -- and the URL at the end still has them:
[root@sipx ~]# sipxecs-setup
On 7/30/12 2:59 PM, Tony Graziano wrote:
it would be in the owners voicemail directory, not the systems moh. I
thought the question was about MOH.
user, is 1289
ls inbox
1175-00.sta 1175-00.wav 1175-00.xml
[root@sip 1289]# ls -lt inbox
total 164
-rw-r--r-- 1 sipxchange
On 7/30/12 3:00 PM, Tony Graziano wrote:
/var/sipxdata/mediaserver/data/mailstore/subscriber-number/conference
cd /var/sipxdata/mediaserver/data/mailstore/1289/conference
-bash: cd: /var/sipxdata/mediaserver/data/mailstore/1289/conference: No
such file or directory
--
Michael Scheidell,
Just tried a couple variants of that - first one left the host and domain at
default and then I manually typed everything else -- that produced the same
result at the end:
https://sipx.domain.com;
Note spurious double quotes show in the proposed defaults:
Enter just the host name of this
On Mon, Jul 30, 2012 at 3:11 PM, Kurt Albershardt k...@nv.net wrote:
thanks~
We scrape host and domain from
/etc/sysconfig/network
so it probably *was* wrong there too. That value comes from using the
network config tool we launch from the setup-setup script. I say was
because we in turn
did you have an owner assigned to the conference prior to holding the
conference? if not, it would not have been recorded.
On Mon, Jul 30, 2012 at 3:04 PM, Michael Scheidell
michael.scheid...@secnap.com wrote:
**
On 7/30/12 3:00 PM, Tony Graziano wrote:
i might venture a guess that re-running the script and taking the defaults
are doing this. if so, it would be incorrect and unwanted behavior. i think
in order to open a jira, it needs to be tried against a fresh install and
all patched up prior to running, then re-running the script. if it
On Jul 30, 2012, at 13:22 , Douglas Hubler wrote:
We scrape host and domain from
/etc/sysconfig/network
so it probably *was* wrong there too. That value comes from using the
network config tool we launch from the setup-setup script. I say was
because we in turn write it back if
Yes i did.
--
Michael Scheidell, CTO
|SECNAP Network Security
-Original message-
From: Tony Graziano tgrazi...@myitdepartment.net
To: Discussion list for users of sipXecs software
sipx-users@list.sipfoundry.org
Sent: Mon, Jul 30, 2012 19:26:20 GMT+00:00
Subject: Re: [sipx-users] 4.4.0
Happened the first time I ran the script, FWIW.
Install was updated 2-3x before I ran setup (due to dependency glitches) so
it's not a good test case.
I'll re-install on a clean VM and try again.
On Jul 30, 2012, at 13:26 , Tony Graziano wrote:
i might venture a guess that re-running the
the only thing that makes me pause is the fact this was a manual restore
from cli. please ensure the directory
/var/sipxata/mediaserver/data/mailstore/user and all subdirectories are
user:group sipxchange:sipxchange octal 0755 and all files within have the
same onwership but octal 644.
You might
I don't use snom's but if you could compare the two sipx generated config
files to see what is different between them, if anything, it would be worth
the look.
On Mon, Jul 30, 2012 at 3:42 PM, Kurt Albershardt k...@nv.net wrote:
Still no luck getting these to register with 4.6
Phones are
Just an update on what I decided to try, which is working.
There is a setting in the audiocodes gateway for a blind transfer. I set this
to *8. Now they can perform a blind transfer from their CAD (computer aided
dispatch) system. The CAD software will be setup to dial *8pauseext and all
is
Diffs are below -- first two are expected but don't know much about the MOH URI.
On Jul 30, 2012, at 13:45 , Tony Graziano wrote:
I don't use snom's but if you could compare the two sipx generated config
files to see what is different between them, if anything, it would be worth
the look.
Still seeing this in the latest builds, FYI.
On Jul 17, 2012, at 17:22 , Kurt Albershardt wrote:
On the fresh 4.6 install I just started up, the System / Date and Time menu
still produces:
An internal error has occurred. Click here to continue.
The ntp package is installed on the
First time running setup script on a freshly built Centos 6 VM:
[root@sipx ~]# cat /etc/sysconfig/network
NETWORKING=yes
GATEWAYDEV=venet0
NETWORKING_IPV6=yes
IPV6_DEFAULTDEV=venet0
HOSTNAME=sipx.domain.com
[root@sipx ~]# sipxecs-setup
Network settings:
IP address : 192.168.X.26
Would you
Created http://track.sipfoundry.org/browse/XX-10340
Quite likely a release a blocker, but not my call.
On Jul 30, 2012, at 14:05 , Kurt Albershardt wrote:
First time running setup script on a freshly built Centos 6 VM:
[root@sipx ~]# cat /etc/sysconfig/network
NETWORKING=yes
that shouldn't cause a network error with the phone though...
On Mon, Jul 30, 2012 at 4:22 PM, Tony Graziano tgrazi...@myitdepartment.net
wrote:
I am not familiar with snom syntax. The MOH uri standard should be:
~~mh~@sipdomain.tld is the typical uri for polycom phones, which use a
maybe... maybe not. if the ntp times because of the way it is configured
(assuming it is misconfigured) out will the snom boot and register? Kind of
brings the why ntp is built into sipx to begin with argument back...
On Mon, Jul 30, 2012 at 4:30 PM, Michael Picher mpic...@ezuce.com wrote:
that
65 matches
Mail list logo