Yes, everyone, I know Ultracote and Oracover are available through mail-order. But,
it still sucks that my local hobby shop does not have it in stock, because I'd rather
not have to pay shipping on one roll of covering if I don't have too (and normally I
don't).
d s wrote:
> WOW! Our local h
WOW! Our local hobby shop has it too!!!
and your point?
--
d s
[EMAIL PROTECTED] - email
(513) 587-2642 x2482 - voicemail/fax
[EMAIL PROTECTED] wrote:
> and its other name Oracover
>
> From New Creations.
>
> G
>
__
FREE voicemail,
Glide speed in ft/sec = sqrt(loading in lbs/sq ft /
(2/(CL*.00237)))
For a typical HLG, CL when you're flying slowly might
be about 0.9. For a 10 oz plane with 350 sq in area
flying at CL = 0.9, glide speed turns out to be about
15 1/2 ft/sec.
__
Hi,
John Hazel worked up a 3 panel lift distrubution
Spread Sheet for Excel (its only part way to
excellent;-). It can be found at:
http://homepage.altavista.com/johnhazel/downloads.html
Thermals,
RED
--
Adam Weston
Seattle, WA
www.tgworks.com
--- Tim Vandenheuvel <[EMAIL PROTECTED]> wrote:
>
One note with Wing-Launching with the snap roll
switch... when engaged the snap-roll overtakes all the
operations of the TX. You cannot move any of the
surfaces with the snap roll switch on. I found this a
bit troublesome since due to atmospheric conditions,
such as a gust of wind, I'll want to
Hi Folks...
I have an Ace MP8000 tx and I am looking for a shift
inverter Ace made to change from a Futaba shift to a
JR/Airt shift. I have the schematic for it and it is
pretty simple but am having a heck of a time finding
the right transistor for it. Thought it might be worth
it to see if anyon
and its other name Oracover
From New Creations.
G
With a JR radio, set-up the plane in the ACRO or Airplane mode instead of as
a sailplane so that you can use the snap roll switch for launch. I use the
right & up mode based oh my spin direction. Set it for 5/8" rudder -- when
the intermittent switch is depressed -- against the direction of the
8 matches
Mail list logo