Joe, I have found that heat will loosen threadlock..Cheers, Eric
- Original Message -
From: Joe Betsko [EMAIL PROTECTED]
To: Multiple recipients of sslivesteam [EMAIL PROTECTED]
Sent: Saturday, March 03, 2001 8:48 PM
Subject: The Joy of the Mikado Axle Pump
Hi,
The Mikado Axle
Hi,
Ok, I got the screws out after putting the eccentric rod assembly into a
vice. It's just a bad omen and I am not looking forward to connecting
the check valve to the bypass valve with the water pipe.
Joe Betsko wrote:
Hi,
The Mikado Axle Pump kit has been a real treat so far.
--
I was wondering if any one makes decals for G Scale trains in the following
roads: Lehigh Valley, and Jersey Central I know that Aristocraft
has a few cars out, but I am interested in some different rolling stock.
Thank You Very Much
John
Try some heat; A propane torch should help. DO NOT get carried away. Just a
little. And the obvious is to make sure the screw driver really fits.
Phil.P. Reading,PA. (PS You ready for the Blizzard?)
Hi,
The Mikado Axle Pump kit has been a real treat so far.
I am trying to get the
Eric,
Thanks, I tried that as I recalled a suggestion from a previous post
here before throwing in the towel. I got them out finally and I am
getting new screws to wrap up the kit. This whole kit was an adventure
because it was retrofitted. For the most part, I reviewed Walt's
previous posts
Is it possible that the threads are backwards of normal to prevent the
screws from coming loose?
~Gary of back to cold and wet Eugene, Oregon
- Original Message - From: "Phil. Paskos" [EMAIL PROTECTED] To:
"Multiple recipients of sslivesteam" [EMAIL PROTECTED] Sent:
Sunday, March 04,
Joe,
A jackhammer? Dynamite? Atomic bomb?
Chuck Walters - President
Central New York Large Scale Railway Society
http://home.twcny.rr.com/cnylsrs
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Joe Betsko
Sent: Saturday, March 03, 2001 8:48 PM
To:
Chuck,
I was going to use the pick axe from the backyard...
"Charles W. Walters" wrote:
Joe,
A jackhammer? Dynamite? Atomic bomb?
Chuck Walters - President
Central New York Large Scale Railway Society
http://home.twcny.rr.com/cnylsrs
-Original Message-
From: [EMAIL
Would someone please tell me how I go about putting a comment or question up
on this Board Thank You.
John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Joe Betsko
Sent: Sunday, March 04, 2001 4:04 PM
To: Multiple recipients of sslivesteam
Hello everyone, I am testing my system to see if this message is going
through. It does not seem to be going though. Would someone please reply
that I know it is working.
Thank You.
John
Thanks for the advice on blacking the cyls. The answer seems to be to paint
the damn things with hi temp paint, As they say if all else fails PUNT.
thanks again Dick W.
-Original Message-
From: Kevin Strong [EMAIL PROTECTED]
To: Multiple recipients of sslivesteam [EMAIL PROTECTED]
John,
I stopped getting emails from all lists around 12:00 M eastern last
night. The email hiccup ended around 4:00 PM eastern today, at least
for me.
John Simkovich wrote:
Hello everyone, I am testing my system to see if this message is going
through. It does not seem to be going
We all got your message John. Your e-mail works.
Gary of Eugene, OR
- Original Message -
From: "John Simkovich" [EMAIL PROTECTED]
To: "Multiple recipients of sslivesteam" [EMAIL PROTECTED]
Sent: Sunday, March 04, 2001 2:11 PM
Subject: TEST
Hello everyone, I am testing my system to
Hi John,
All you do is hit "Reply" or start a new message and use your "Address Book"
to send sslivesteam group a message.
So far every message has come through just fine.
~ Gary still cold and wet in Eugene
- Original Message -
From: "John Simkovich" [EMAIL PROTECTED]
To: "Multiple
Thank you Joe.
I thought that I was not doing something right.
John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Joe Betsko
Sent: Sunday, March 04, 2001 5:24 PM
To: Multiple recipients of sslivesteam
Subject: Re: TEST
John,
I stopped getting
THank You Gary.
It is working now. I got a few replies. I just wanted to make sure that I
was doing something right.
John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Gary Lane
Sent: Sunday, March 04, 2001 5:10 PM
To: Multiple recipients of
John, a copy of your wire does not go to you. Suggest you send yourself a copy
or look it up in the archives later.
John Simkovich wrote:
Hello everyone, I am testing my system to see if this message is going
through. It does not seem to be going though. Would someone please reply
that I
Hello,
I am interested in knowing if anyone makes decals for g scale trains with
some of the eastern fallen flags, such as Lehigh Valley, and Central
Railroad of New Jersey and Pennsy possibly??? Thanks
John
John,
Try:
Robert Dustin
P.O. Box 77
Thompson, CT 06277
Phone/Fax 860-923-0174
He has a catalog for $4.00, too.
John Simkovich wrote:
Hello,
I am interested in knowing if anyone makes decals for g scale trains with
some of the eastern fallen flags, such as Lehigh Valley, and Central
It is possible to get a copy of your posts, contact the list Mom for
instructions -- I did and it works great, but my am having trouble finding
the actual procedure in the great labyrinth of my memory. Guess it is just
another "brain fat."
Keep your steam up!
Walt Lunk
thanks.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of [EMAIL PROTECTED]
Sent: Sunday, March 04, 2001 6:28 PM
To: Multiple recipients of sslivesteam
Subject: Re: TEST
It is possible to get a copy of your posts, contact the list Mom for
instructions
It is working on my end!
Bob
Hello Walt and Everyone,
You would have thought that I would have already produced thousands of wheels
from solid bar stock, right? As it turns out I've only made a few steel wheels
for 1.5" scale rolling stock and simple solid wheels for locomotives. These were
done for replacements on badly
Hello Harry and Everyone,
Your EDM idea seems very plausible, but not cost effective (unless you were
talking about EDM'ing the patterns only). If you're talking about using EDM on
each wheel, that goes back to the posts about Mr. Wood's wheels. They're beautiful
little works of art, but who
24 matches
Mail list logo