Hallo Michael,
Really enjoyed the pics, like assembling an Aster or O.S--A-Hem!!
Geoff
Hi all,
>
>I just posted a few images that I shot earlier this month during an Open House
>at the Golden Gate Railroad Museum at : www.panyo.com/ggrm
>
>What does this have to do with small scale live
Thanks Walt,
Very interesting-I like the description of your Cooper Aileen. My Hunslet
cost $500 new, it is powerful too--a 2-6-2, and long running. Has
required some repairs--my fault! --I like the description of your Cooper
Aileen.
The Scotch? I have a bottle of 10yr old Glenmorangie Single
Walt,
I believe that your statement "the increasing vapor pressure keeps the water
from shifting phase, requiring greater heat input per unit to increase the
temp to make more steam" is correct. As the boiler continues to be fired the
temperature and pressure both rise until the safety blows.
Ve
Steve,
My fuzzy logic (Balvenie fortified) seems to think there is some sort of
temperature gradient, otherwise all the water would flash to steam unless the
increasing vapor pressure keeps the water from shifting phase, requiring
greater heat input per unit to increase the temp to make more st
Hi,
To my knowledge, the last loco Tom Cooper marketed in America was based on
the Barclay Locomotive Works Aileen. By coincidence, Mr. Andrew Barclay,
founder of said locoworks in Kilmarnock(sp) has a grandson living in the
states. He visited me at The Depot today "Andy" and I have been friend
Gary,,
You Knitpicker you--at least he incorporated some good ideas Some
credit for the poor fellow! Thanks for the "history".
Geoff (*smile*)
So Merlin loco works knew how to
>>do it almost 20 yrs ago!
>
>I wouldn't think I would bestow credit on Tom Cooper aka Mr. Merlin. Most
>likely i
Walt and the List:
According to "Properties of Saturated Steam" data from the 1991 Brooks
Instruments catalog, saturated steam temperatures for various pressures
(psig) will be:
PSIGTemp (F)
0.0 212.00
20.3259.28
40.3287.07
60.3307.60
Gordon Watson wrote:
> .but the connections must equal in cross section
> the milled channel in the main body ie; if the channel is 1/4 sq. the pipes
> should be 5/16th dia..
>
> Gordon W.
>
What about the "joint" between the pipes and bloc
Would it be possible to use Pyrex microscope slides to make that kind of
sight gauge? The Pyrex should have more than enough heat tolerance and the
lab slides are very uniform in thickness, etc. True that would not eliminate
the meniscus thing, but with a red line behind it, it should not be a
Du'h. Of course, you're correct about that. It's a function of
pressure.
royce
[EMAIL PROTECTED] wrote:
> In a message dated 5/31/01 8:30:03 AM Mountain Daylight Time,
> [EMAIL PROTECTED] writes:
>
> << it can't be much over 200
> deg F that it would have to endure. >>
>
> It can be much hig
Ive followed this with interest..becuase Ive had the Plastic plate in Mamods
blow out while running ,very scary[but not real dangerous!] the type of
water glass on the Merlin /Beck locos is easy to make. Body from 3/8 sq
brass . milled channel in center with bolt holes around outside, recess
mille
Walt,
The way these things are "supposed" to work is that the steam in the top
leg is slowly condensing on the cooler metal and glass, and is supplying
water which is slowly going down through the bottom fitting and back to the
boiler.
Peter Trounce.
--
> From: [EMAIL PROTECTED]
> To: Mul
Hi all,
I just posted a few images that I shot earlier this month during an Open House
at the Golden Gate Railroad Museum at : www.panyo.com/ggrm
What does this have to do with small scale live steam?
Honestly, it's not exactly on topic, although there was an O-Gauge layout there
- but spar
13 matches
Mail list logo