Jim:-
The gears used on the Climax are not spiral bevels, but skew bevels. As I
understand it a spiral bevel, as usually sold, is similar to the well known
straight bevel where the shafts meet at a point, but has spirally cut teeth to
give a greater contact area and greater smoothness.
A skew
At 02:12 PM 8/15/03 +0800, you wrote:
The firm SHM is the old established company S.H.Muffett Gears.
Jim Gregg.
I thought they bit the dust years ago, along with A. Kellett.
Regards,
Harry
:12 PM
To: Multiple recipients of sslivesteam
Subject: Re: Climax gears was VPC Drawings
Harry and Mike.
J.H.M. Gears in Tunbridge Wells UK do excellent Skew Gears These are
a
right angle drive made up of what looks like two coarse pitch
multi-start
worms meshing at right angles. Available
At 09:06 AM 8/15/03 -0700, you wrote:
I have been looking for Kozo's second part of his Climax gears article
in the August 1983 Live Steam for years. I will check out the new
printing of his book.
Harley,
Unfortunately I have only the articles as they originally appeared in
LSM so I don't
Harry wrote:-
One of the two independant articles has a full 1-1/2 pages of
complex math formulae to be solved for the various weensy geometrical bits.
It's all in the book - how else would I be able to work out the dimensions for a
set of gears with a totally different ratio and size?
Mike
At 10:09 PM 8/12/03, you wrote:
I believe Kozo Hiraoka tells how to make the gears in his book on the
Climax and it is back in print from Village Press Publications.
Ian
Ian and all,
There is a tendency to say Kozo shows you how thus implying that he's
devised a simple technique which
Michael,
The drawings went out today.
Regards,
Harry
PM
Subject: Re: VPC Drawings
Harry,
If you ever get around to doing drawings for a small two cylinder Shay,
I'd like to get a copy.
Terry Griner
Columbus Ohio USA
[EMAIL PROTECTED] 08/11/2003 10:44:12 PM
At 10:13 PM 8/11/03 -0400, you wrote:
Drawings arrived in fine shape today
Got any Vest
Harry wrote:-
I'd like to see an attempt at skew bevel
gears in Ga1 a la Kozo but I'm afraid that's not on the horizon for me.
Agreed, it's not easy, but today I cut the first of several hundred skew bevel
gears according to Kozo (plus a certain amount of experimentation.) Tomorrow, I
have
]
To: Multiple recipients of sslivesteam [EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 10:39 PM
Subject: Re: Re: VPC Drawings/Shay engine
Arthur,
Shay Days is only about 11 months away. Better get hopping!
You can be the second to attend from GB.
Bruce Gathman
On Tue, 12 Aug 2003 12:33:39 +0100
Subject: VPC Drawings
Michael,
The drawings went out today.
Regards,
Harry
More concerned that a visit to Ernie Co is only 3 days away.
Who was Brit #1??
Art
- Original Message -
From: Bruce Gathman [EMAIL PROTECTED]
To: Multiple recipients of sslivesteam [EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 10:39 PM
Subject: Re: Re: VPC Drawings/Shay engine
At 10:13 PM 8/11/03 -0400, you wrote:
Drawings arrived in fine shape today
Got any Vest Pocket SHAY drawings???
No . . . not yet.
hw
: VPC Drawings
At 09:16 AM 8/12/03 -0500, you wrote:
but for all builders
the gears, which are not to my knowledge commercially made, would probably
cause the average amatuer machinist quit a bit of distress. I know they
would me.
Regards,
Harry
Hi all
I believe Kozo Hiraoka tells how to make the gears in
At 09:27 AM 8/12/03 -0400, you wrote:
Having had a chance to look over the Vest Pocket Climax drawings now,
They are Beautiful!
Thanks
Michael
Michael,
Thank you for the kind remarks. Even though the original project was
based upon the use of Mel Ridley's castings I tried to insure that
PROTECTED]
To: Multiple recipients of sslivesteam [EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 12:03 PM
Subject: Re: VPC Drawings
Harry,
If you ever get around to doing drawings for a small two cylinder Shay,
I'd like to get a copy.
Terry Griner
Columbus Ohio USA
[EMAIL PROTECTED] 08/11/2003 10
Harry,
If you ever get around to doing drawings for a small two cylinder Shay, I'd like to
get a copy.
Terry Griner
Columbus Ohio USA
[EMAIL PROTECTED] 08/11/2003 10:44:12 PM
At 10:13 PM 8/11/03 -0400, you wrote:
Drawings arrived in fine shape today
Got any Vest Pocket SHAY
18 matches
Mail list logo