On Tue, 1 Nov 2005 23:15:23 +0100
"Holger Bauer" <[EMAIL PROTECTED]> wrote:
> Well, I haven't tried that yet, but I would think that should work just
> fine. If not just set the file back to the original state, reboot (so it
That was the solution. When it was "wrap", pushing "Enable firmware upda
Hi,
Just a small note to let you know that the /usr/local/pkg/squid_extauth.xml file is wrong,
it just have this content:
404 Not Found
Not Found
The requested URL /packages/config/squid_extauth.xml was not found on this
server.
Apache/1.3.33 Server at www.pfsense.com Port 80
raj
-
Thanks for your reply. I was aware
of that list which is why I asked the question. I'm not sure how much I
trust Intels document stating that it works with FreeBSD 4.x and later,
I hope it does, but this could be a misprint.
Would be good to here from anyone who is using the Intel® PRO/1000 P
Title: DYNDNS fixed
My IP changed yesterday and it was detected and registered successfully. I think this one is fixed finally.
Tx
Ivan.
In the list below are the Intel Chipsets that should
work, taken from http://pfsense.com/index.php?id=37 ,
which is basically the hardwaresupportlist of freebsd6. I don't know if anybody
is using this card with pfsense and as you see it is not listed there.
However, as it is supported by fre
Hi All
I want to use an Intel® PRO/1000 PT based on the Intel® 82571EB Gigabit
Controller in PFSense will this be compatible?. This is a PCI Express
Network card
Below is a link to the product specs. This document says it is
compatible with FreeBSD 4.x but I could not find on the FreeBSD web
nice
to hear, I'll put it "under construction" so nobody fetches that topic again
:-)
Thanks,
Holger
-Ursprüngliche Nachricht-Von: Christian Veith
[mailto:[EMAIL PROTECTED]Gesendet: Dienstag, 1. November
2005 23:41An: support@pfsense.comBetreff: [pfSense
Support] Tutorial
Hi,
i´m working on tutorials for setting up the captive
portal with integrated user manager and one with radius authentification on a
windows 2000 Domain controller.
chris
Well, I haven't tried that yet, but I would think that should work just
fine. If not just set the file back to the original state, reboot (so it
runs as rw filesystem again), upload firmware, set file back tp wrap and
reboot to make it ro again. But I would first try under labcondition if
it works
Have you tried to change the modes of the controller in BIOS ?
Like native vs. legacy mode and RAID mode vs. SATA mode etc ?
The ICH7 support of FreeBSD might also be to blame. I'm not sure how good it
is atm.
-lsf
-Original Message-
From: news [mailto:[EMAIL PROTECTED] On Behalf Of Lyn
Here is dmesg -a after booting verbose. The drive is connected to
Channel 0 on the SATA controller.
Lynn
P:
ID: 0x VER: 0x00050014 LDR: 0x0100 DFR: 0x0fff
lint0: 0x00010700 lint1: 0x0400 TPR: 0x SVR: 0x01ff
timer: 0x000100ef therm: 0x0001 err: 0x
Comes back with nothing. With -v I get this:
# camcontrol devlist -v
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
I see the the SATA controller being detected in the boot messages, so I
don't think it is being picked up as SCSI:
atapci1: port
>From the loader prompt (Press ENTER to boot yadda yadda) try to boot
-v and then post dmesg -a
Scott
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
> I get the same thing with FreeBSD 6.0 RC1. It boots to the installer
> and then when attempting to install, it says it can't find a disk.
I get the same thing with FreeBSD 6.0 RC1. It boots to the installer
and then when attempting to install, it says it can't find a disk. The
controller is found as a SATA. Here is the relevant portion of dmesg
(this is from pfSense, but the RC1 looked the same)
atapci0: port
0x1f0-0x1f7,0x
Lynn A. Roth wrote:
Some more info:
when I run atacontrol info, it appears that the disk is not attached.
what does 'camcontrol devlist' show? As a couple others have pointed
out, this drive might show up as "SCSI".
---
At 02:28 PM 11/1/2005, you wrote:
If it is any help, I have PE750's with SATA running Linux. Not sure if it
would show in a similar way, but would a SATA drive show as a SCSI device?
I think it does on my Dell 750s.
that would be up to the controller. i have a 3ware 4-port sata
controller an
If it is any help, I have PE750's with SATA running Linux. Not sure if it
would show in a similar way, but would a SATA drive show as a SCSI device?
I think it does on my Dell 750s.
Andrew
> -Original Message-
> From: Scott Ullrich [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, November 01,
It appears that FreeBSD is not seeing this drive as attached for some
reason. Can you try a FreeBSD RC disk?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
> Some more info:
>
> when I run atacontrol info, it appears that the disk is not attached. I
> have booted to Linux and Windows insta
Some more info:
when I run atacontrol info, it appears that the disk is not attached. I
have booted to Linux and Windows installer and they both see the disk. I
believe that the SATA drive should be on ATA channel 2. (According to th
e boot messages, which show the ICH7 SATA Controller being
Here you go.
Lynn
Scott Ullrich wrote:
Please send the contents of /tmp/ after you receive the error message.
CTRL-C a number of times to break back to the shell and then SCP
then files somewhere.
Scott
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I should also note that it has a
Hi Holger,
Thanks for this hint. Great.
I've a probably very stupid question, after changed the "platform" to wrap, can
I upgrade the firmware with the generic PCs one?
Best regards
Imre
On Tue, 1 Nov 2005 12:21:46 +0100
"Holger Bauer" <[EMAIL PROTECTED]> wrote:
> This FAQ-Entry adresses you
At 01:31 PM 11/1/2005, you wrote:
Can we please let this thread die already? I'm tired about hearing
of benchmarking the *WRONG* way.
"Must. Control. The. Fist. Of. Death."
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
I think the first rule of testing applies start at the beginning and
work your way backwards.
Please u solved ur problems
> -Original Message-
> From: Peter Zaitsev [mailto:[EMAIL PROTECTED]
> Sent: 01 November 2005 18:16
> To: support@pfsense.com
> Subject: RE: [pfSense Support] Network
Please send the contents of /tmp/ after you receive the error message.
CTRL-C a number of times to break back to the shell and then SCP
then files somewhere.
Scott
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
> I should also note that it has a single SATA drive on the first SATA
> conne
Can we please let this thread die already? I'm tired about hearing
of benchmarking the *WRONG* way.
Scott
On 11/1/05, Peter Zaitsev <[EMAIL PROTECTED]> wrote:
> On Tue, 2005-11-01 at 10:43 -0600, Fleming, John (ZeroChaos) wrote:
> > >Also I wrote when stall happens I can't telnet to port 80 on
I should also note that it has a single SATA drive on the first SATA
connection. I get the same issue with both of the two identical systems.
Lynn
Scott Ullrich wrote:
What version?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I'm having trouble installing pfSense to my new Dell PE
Thanks Scott!
On Tue, 1 Nov 2005 13:03:19 -0500
Scott Ullrich <[EMAIL PROTECTED]> wrote:
> Surf to $IPOFPFSENSE/system_firmware.php
>
> IE: http://192.168.1.1/system_firmware.php
>
--
This is Linux Land.
In silent nights you can hear the windows machines rebooting
signature.asc
Description:
I have tried a several versions, including .85.2,.86, .88, .89.2 and .90
Scott Ullrich wrote:
What version?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I'm having trouble installing pfSense to my new Dell PE 850.
The installer doesn't find a disk. If I do an lsdev before booting,
On Tue, 2005-11-01 at 10:43 -0600, Fleming, John (ZeroChaos) wrote:
> >Also I wrote when stall happens I can't telnet to port 80 on web server
> >host - which means it is not just program causing stall.
> Are you trying this from the same host as the benchmark program? I
> wonder if a 2nd host wou
What version?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
> I'm having trouble installing pfSense to my new Dell PE 850.
>
> The installer doesn't find a disk. If I do an lsdev before booting, I
> see the disk and partitions. The system has a ICH7 chipset, which
> appears to be problemat
Surf to $IPOFPFSENSE/system_firmware.php
IE: http://192.168.1.1/system_firmware.php
On 11/1/05, Ispánovits Imre <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I've made a fresh install fro 0.90 LifeCD onto a 256MB CF card today.
> Now I am trying to update the firmware to 0.90a and when entering to Firmwar
I'm having trouble installing pfSense to my new Dell PE 850.
The installer doesn't find a disk. If I do an lsdev before booting, I
see the disk and partitions. The system has a ICH7 chipset, which
appears to be problematic at this point in time. Does anyone have any
idea how I could get thi
Hi,
I've made a fresh install fro 0.90 LifeCD onto a 256MB CF card today.
Now I am trying to update the firmware to 0.90a and when entering to Firmware
page I receive the following error message instead of the page.
"Warning: raiseerror(PEAR.inc): failed to open stream: No such file or
directory i
>Also I wrote when stall happens I can't telnet to port 80 on web server
>host - which means it is not just program causing stall.
Are you trying this from the same host as the benchmark program? I
wonder if a 2nd host would have the same problem.
-Original Message-
From: Peter Zaitsev [m
It's working now Colin, thanks a lot!!!
Emanuel Gonzalez
Guatemala
-Mensaje original-
De: Colin Smith [mailto:[EMAIL PROTECTED]
Enviado el: Martes, 01 de Noviembre de 2005 10:37 a.m.
Para: support@pfsense.com
Asunto: Re: [pfSense Support] RV: Unable to install "pfflowd" package
Whoops,
Not only was it corrected, someone else asked about the same thing yesterday.
Scott
On 11/1/05, David Strout <[EMAIL PROTECTED]> wrote:
>
> This appears to be corrected in ver 0.90a ...
> sorry for jumping the gun.
>
> > [invalid argument supplied for foreach in line
> 308 of /etc/inc/services.i
On 11/1/05, Jason J. Ellingson <[EMAIL PROTECTED]> wrote:
> I know it was working before the latest upgrade. If there is a repository
> of old upgrades, I'll keep going back until I see the version that first
> causes this. Perhaps then I'll mull through the code to see what changes
> were made.
I know it was working before the latest upgrade. If there is a repository
of old upgrades, I'll keep going back until I see the version that first
causes this. Perhaps then I'll mull through the code to see what changes
were made.
Jason
This appears to be corrected in ver 0.90a ...
sorry for jumping the gun.
> [invalid argument supplied for foreach in line
308 of /etc/inc/services.inc]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-ma
Everyone,
A couple of things w/ 0.90 install.
1.
When booting after the (clean) install of 0.90
from ISO I get a message about ..
[invalid argument supplied for foreach in line 308
of /etc/inc/services.inc]
I have looked at the file and see NO syntaxing
wrongs, but then again .. my PHP is not an
This FAQ-Entry adresses your question as well:
http://faq.pfsense.com/index.php?sid=4624&lang=en&action=artikel&cat=4&id=78&artlang=en
Holger
> -Ursprüngliche Nachricht-
> Von: Bill Marquette [mailto:[EMAIL PROTECTED]
> Gesendet: Dienstag, 1. November 2005 05:36
> An: support@pfsense.com
Whoops, the updated XML file wasn't published. I just copied it over and was
able to install pfflowd on my test firewall.
* Emanuel A. Gonzalez <[EMAIL PROTECTED]> [2005-11-01 04:16:10 -0600]:
> I've tried again the installation of the packages, but I got the same error
> message.
pgpT8DDbxewK
I've tried again the installation of the packages, but I got the same error
message.
Emanuel Gonzalez
Guatemala
-Mensaje original-
De: Colin Smith [mailto:[EMAIL PROTECTED]
Enviado el: Martes, 01 de Noviembre de 2005 09:58 a.m.
Para: support@pfsense.com
Asunto: Re: [pfSense Support] RV
I've moved all the package URLs from the old 6-CURRENT branch to 6.0-RELEASE.
Please let me know if this fixes installation.
Colin
* Emanuel A. Gonzalez <[EMAIL PROTECTED]> [2005-11-01 03:13:30 -0600]:
> Package WAS NOT installed properly.
pgppiA6YY83IZ.pgp
Description: PGP signature
This is the same
with the installation of the “ntop” package:
---
pkg_mgr_ntop.log -
Beginning package
installation.
Downloading
package configuration file...
ntop-3.1_1 Array
(
[0] =>
Requested space: 1480 bytes, free
Well it seems very useful to delegate administration of the pf-box, or just
monitoring the status without granting unnecesary access to users.
I would like to see it working and test some configurations :)
Thanks Tomasso!
Emanuel Gonzalez
Guatemala
-Mensaje original-
De: Tommaso Di Don
I’m working
on 0.90a version and I get this error on /tmp/pkg_mgr_pfflowd.log every time I
try to install the pfflowd package:
---
pkg_mgr_pfflowd.log -
Beginning package
installation.
Downloading
package configuration file...
My plans were to send out the modification when the gui is in the
final version, but if someone wants i now, please let me know.
On 11/1/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote:
> This would be a very interesting option! I'm really waiting to se it...
>
> -Mensaje original-
> De:
48 matches
Mail list logo
