?that helped out a lot. now I at the point of where it is fully set up but I
cannot seem to get any response from the DHCPv6 server. I am installing
wireshark on another comp to make sure my desktop is even sending out the
requests.
--
- Original Message -
> Does anyone have a recommended PCI-attached Ethernet switch that would
> in
> essence put 4 or 5 bridged interfaces right on the router itself (In
> our
> case, a Soekris Net5501)? Something kind of like what's depicted here:
> http://uk.level1.com/product_d.php?id=29
Don't know about switch cards specifically, but you could just buy
quad port NIC and bridge all the ports?
As for a working card, our pfSense box is a virtual machine, the host
os is CentOS with an Intel Pro 1000 MT which works fine.
--
Regards,
James.
http://www.jamesbensley.co.cc/
There are
Does anyone have a recommended PCI-attached Ethernet switch that would in
essence put 4 or 5 bridged interfaces right on the router itself (In our
case, a Soekris Net5501)? Something kind of like what's depicted here:
http://uk.level1.com/product_d.php?id=290
...except one that you have had suc
Hello,
I have a pfsense 1.2 router with a bridging problem that I can't seem to
figure out. It is a multi-wan setup, however, the bridge configuration is
fairly simple. I am just trying to run another router behind pfsense and
have it use a single public IP from a subnet on the WAN interface. Afte
Hi
I have pfsense running in bridge mode.
Lan interface have routing to other network.
Say : lan interface has ip 10.10.10.2
And has routing to 10.10.1.x/24
Is it possbible for me to manage bandwidth for network 10.10.1.x ?
Thx
-
On 22/12/2010 15:25, Seth Mos wrote:
> Op 22-12-2010 16:15, Vincent Hoffman schreef:
>
>> I'm already using a CARP address as the VPN endpoint. So the failover
>> will fire up racoon on the backup node, or do i need to have racoon
>> started on the backup node already and it just wont negotiate unt
Op 22-12-2010 16:15, Vincent Hoffman schreef:
I'm already using a CARP address as the VPN endpoint. So the failover
will fire up racoon on the backup node, or do i need to have racoon
started on the backup node already and it just wont negotiate until its
master for that CARP interface?
The ca
On 22/12/2010 12:42, Seth Mos wrote:
> Op 22-12-2010 11:22, Vincent Hoffman schreef:
>> At work we've a couple of servers running a synced pfsense
>> cluster with IPsec tunnels to 2 other pfsense firewalls. While I can see
>> that CARP syncs the configs across within the cluster I cant find
>> anyt
Op 21-12-2010 22:50, Sean Cavanaugh schreef:
?ok. I got past the gitsync by hitting enter and letting it actually
continue.
now after the sync I get the nice error
"Parse error: syntax error, unexpected T_SL in /etc/inc/vslb.inc on line
291 "
Oops my bad. I merged up with the current 2.0 code
Op 22-12-2010 11:22, Vincent Hoffman schreef:
At work we've a couple of servers running a synced pfsense
cluster with IPsec tunnels to 2 other pfsense firewalls. While I can see
that CARP syncs the configs across within the cluster I cant find
anything that specifically says that if the primary
On 12/22/2010 3:47 AM, Maik Heinelt wrote:
> Since about 2 days, I try to get work the mobile client in pfSense 1.2.3.
>
> Now, I noticed, that pfSense 1.2.3RC1 is different to my current version
> pfSense 1.2.3.
> I miss the NAT Traversal setting for the mobile client.
> Where is it in 1.2.3 ???
Hi,
At work we've a couple of servers running a synced pfsense
cluster with IPsec tunnels to 2 other pfsense firewalls. While I can see
that CARP syncs the configs across within the cluster I cant find
anything that specifically says that if the primary node dies the ipsec
(racoon) demon wi
Since about 2 days, I try to get work the mobile client in pfSense 1.2.3.
Now, I noticed, that pfSense 1.2.3RC1 is different to my current version
pfSense 1.2.3.
I miss the NAT Traversal setting for the mobile client.
Where is it in 1.2.3 ??? How can I activate it?
Maik
<>---
14 matches
Mail list logo
