ystems Administrator
Atlas Networks, LLC
Atlas Networks is an Atlas Accelerator Company
-Original Message-
From: Nathan Eisenberg [mailto:nat...@atlasnetworks.us]
Sent: Monday, January 05, 2009 5:32 PM
To: 'support@pfsense.com'
Subject: RE: AW: [pfSense Support] em0: Watchdog tim
On Mon, Jan 5, 2009 at 8:32 PM, Nathan Eisenberg
wrote:
> Any thoughts on a next step in troubleshooting?
>
As I suggested earlier in this thread:
http://doc.pfsense.org/index.php/Policy_on_FreeBSD_issues
"Most frequently these issues are driver bugs. We do not have any
developers who work on d
buech...@gmail.com [mailto:cbuech...@gmail.com] On Behalf Of Chris
Buechler
Sent: Monday, January 05, 2009 5:14 PM
To: support@pfsense.com
Subject: Re: AW: [pfSense Support] em0: Watchdog timeout -- resetting
On Mon, Jan 5, 2009 at 2:02 PM, Nathan Eisenberg
wrote:
>
> Admittedly, I did not expect
On Mon, Jan 5, 2009 at 2:02 PM, Nathan Eisenberg
wrote:
>
> Admittedly, I did not expect to run into hardware/driver issues when I was
> buying these NICs. :( In fact, that's exactly the reason I
> went with Intel HW in the first place.
>
Usually that's an accurate assessment. This card is new
--Ursprüngliche Nachricht-
Von: Paul Mansfield [mailto:it-admin-pfse...@taptu.com]
Gesendet: Montag, 5. Januar 2009 12:01
An: support@pfsense.com
Betreff: Re: AW: [pfSense Support] em0: Watchdog timeout -- resetting
Fuchs, Martin wrote:
> And perhaps try to set the port speed in pfsense AND
ubject: Re: AW: [pfSense Support] em0: Watchdog timeout -- resetting
Fuchs, Martin wrote:
> And perhaps try to set the port speed in pfsense AND the switch, e.g.
> 1000MBit FD...
> Sometimes this helps, too
Once you start setting port speeds to fix rates and duplex you're going
Fuchs, Martin wrote:
> And perhaps try to set the port speed in pfsense AND the switch, e.g.
> 1000MBit FD...
> Sometimes this helps, too
Once you start setting port speeds to fix rates and duplex you're going
down a long and slippery slope, it's best to avoid it unless there's a
proven good rea
And perhaps try to set the port speed in pfsense AND the switch, e.g. 1000MBit
FD...
Sometimes this helps, too
Regards,
Martin
-Ursprüngliche Nachricht-
Von: apiase...@midatlanticbb.com [mailto:apiase...@midatlanticbb.com]
Gesendet: Sonntag, 4. Januar 2009 04:17
An: support@pfsense.com
