[Tinyos-help] Telosb sensors power consumption

Hello, Does anyone know how much it cost in terms of energy consumption to pool TelosB sensors? Or do you know how can I find this out with out building specialised circuits? I am interested in onboard sensors( Light and Humidity/Temperature sensors). Thank you for your help. Regards Tatiana.

[Tinyos-help] Tmote sky: USB speed up and ACK

Hi,  i'm trying to speed up the transfer rate (baud rate) of my mote's USB. I need higher baud rate because many slaves tx to my master that is connected to the PC and so i have to tx to the PC large number of pck. For tx to the UART i use the GenericComm. I try to follow directions found on moteiv

Re: [Tinyos-help] using the hardware multiplier on msp430 for FFT

I don't think there is an interface, but using the hardware multiplier is a rather easy task to figure out.  I haven't used it for FFT, but I have implemented digital filtering without any issues.  You should check out the TI application note on the hardware multiplier for info on how to use it and

Re: [Tinyos-help] Tmote sky: USB speed up and ACK

You did not follow the directions completely. Specifically, you cannot use :262144, instead you must modify your platform.properties file as the help document on Moteiv's website clearly states: http://www.moteiv.com/community/Change_the_default_UART_baud_rate -Joe On 6/11/06, giovanni gamba <

[Tinyos-help] Problems with MDA300 and Micaz using ECHO5

Hi, I'm currently using a Micaz with a MDA300 board to get moisture samples. I'm using Sample interface to access SamplerC as in the example in Xsensormda300M.nc. I think that I have already set correctly the MDA300 sensorboard to take the samples from Channel 6. I'm using: call Sample.getSample(6,

[tinyos-help]how could see the result tutorial lesson 3 of mate

Hi all, Currently I am learning mate VM. I hava a question about the mate Lesson 3, the lesson said when I following the program example and use the VMBufferReader, I should see a result in the following form:   Received multihop buffer of type PHOTO, size 10 from mote 0  [131][1023][42][939][669][

[Tinyos-help] Imote help

HI everyone,    I wanted to program Intelmotes(not on mote2 platform).My IMote kit has      --3 base boards,    --2Imote double battery boards with batteries,    --1USB interface board with USB cable     --1Accelerometer sensor board    --1Temperature sensor boardI wanted to transmit the code to th