http://newfies-normandie.com/modules/Search/world.html___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
I have indeed managed to get the DAC to work on the TelosB. I will send you
some
test code via a separate email.
Sandip
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tin
Hi
If someone has the MDA100 board from Memsic (the one with the prototyping
area),
can they tell me if it has the 51-pin headers on both sides? I haven't been
able
to find a picture or document online that shows what's on the bottom side.
Thanks,
Sandip
__
Hi
I'm trying to interface an external slave device to an IRIS mote using the MOSI
and SCK lines on the 51-pin connector and a GPIO pin (PortC5) configured as the
slave select (my external device has only 1 data line for input so MISO is
unused).
I used an oscilloscope to look at the SCK and
Hi
I am using the LogStorage component in tinyos to write data to flash on a
TelosB
mote. I append data in 240 byte blocks (since the max size constraint is 254)
and read it back in 80 byte blocks so I can fit it in a single message.However,
even when I write the same pattern, e.g. all 0s, whe
I believe this is what you are looking for - it is kinda expensive though :(
http://meritec.thomasnet.com/item/all-categories/fpdi-1-51-position-display-cables/item-2659?&seo=110&bc=100|1003|3001093|0|3001057
Sandip
Agnelo Silva wrote:
> I need to connect a sensor board (MTS310) to the MicaZ an
Hi
Does the Maxim Max232 (with the external caps etc) work as a level converter
for connecting a TelosB UART to a true RS232 adapter or do I need the Max3232?
I have the datasheets which indicate I may need the 3232 but I can get my hands
on the Max232 locally and need to order the 3232 online so
Hi
I need to communicate with 2 different devices using different baud rates over
UART0. So I wrote a simple test program to begin with where I program one
Tmote as a sender and one as a receiver and used Leds to indicate whether or
not send, receive returned SUCCESS and whether the rcvd byte ma
AIL PROTECTED]>
To: Jan Hauer <[EMAIL PROTECTED]>
Cc: Sandip Bapat <[EMAIL PROTECTED]>; tinyos-help@millennium.berkeley.edu
Sent: Friday, March 28, 2008 5:20:05 PM
Subject: Re: [Tinyos-help] Resource.reserve returns EBUSY forever after some
time
On Mar 28, 2008, at 7:34 AM, Jan Hau
else
call Resource.release();
}
event MultiChannel.dataReady(bufptr){
call Resource.release();
...make local copy;
post processData();
}
Thank you
Sandip
- Original Message
From: Jan Hauer <[EMAIL PROTECTED]>
To: Sandip Bapat <[EMAIL PROTECTED]>
Cc: tinyos-hel
Hi
I am using MultiChannel sampling on the msp430 ADC as shown in
tinyos-2.x/apps/tests/msp430/Adc12. When I run the program, it runs correctly
for a non-deterministic length of time (sometimes minutes, sometimes a day) and
then appears to be stuck. Debugging with LEDs and UART shows that the
Hi
Does tinyos 2.x install on a Windows XP 64-bit OS? (using the same procedure
outlined at
http://www.tinyos.net/dist-2.0.0/tinyos-2.0.2/doc/html/install-tinyos.html
)
Is there anything special one needs to do or does WoW64 take care of everything
transparently?
Thanks
Sandip
_
o is responsible for the msp430 ADC stack, is at a
> project meeting and probably has not read the thread. Please get in touch
> with him to coordinate. No #ifdefs please :)
>
> Vlado
>
>
> On Wed, Feb 13, 2008 at 6:43 PM, John Griessen <[EMAIL PROTECTED]> wrote:
> >
David, Greg:
I did verify that I am using 3.2.3 and I also uninstalled the
mspgcc-win32tinyos package and reinstalled the msp430tools-gcc package. But
that doesn't seem to have solved the problem.
I did get BaseStation to compile on another machine which has the same set of
file versions so pe
Hi
I am trying to compile the default BaseStation app under tinyos-2.x/apps. When
I try to compile for 'telosb' I get the following error:
BaseStationP.nc: In function `main':
BaseStationP.nc:102: Internal compiler error in gen_lowpart, at emit-rtl.c:1197
Please submit a full bug report, with pr
I was using the dual setup so my cygwin installation was from the 1.1.11
autoinstaller and I'd used the upgrade instructions for 2.0.
When I unistalled and tried to reinstall from the autoinstaller, it gave the
same fork_copy errors and the installation was not successful so I finally gave
up o
Hi
I am getting a fork_copy error in cygwin when I try to do pretty much anything.
When I start cygwin I get
2 [main] perl 4924 fork_copy: linked dll data/bss pass 0 failed, 0x3E2000.
.0x3E2370, done 0, windows pid 4976, Win32 error 487
When I try to compile an app I get
2 [main] msp
Hi
I searched through the tinyos-help archives for this error. I found a couple of
users who faced the same problem buut saw no replies as to how this can be
resolved. Can anyone help? I tried uninstalling and reinstalling but the new
install also fails.
The exact error message when I load cy
Hi
I wish to sample a 2-axes sensor that is mapped to channels 6 and 7 of the
TMote ADC. I think that the MSP430ADC12Multiple component lets me do that but I
am not sure how exactly I should use it. In particular
1. How do I specify the precise sequence of channels that I need to convert
(shou
If I want to change the tinyos message format to include a src
field, does only adding this field to the TOSMsg struct declaration in AM.h
suffice or do I have to change anything else?
Thanks
Sandip
___
Tinyos-help mailing list
Tiny
Hi,
I was able to successfully
compile the Mate toolchain in tools/java/net/tinyos/script and was able to generate the BombillaTelosB folder by running VMBuilder
from the samples folder. However, I am getting the following errors while
trying to compile the application.
I am using t
21 matches
Mail list logo
