Hello friends,
Yesterday I was working with mica2 motes on Tinyos-1.x and I found out that
my mica2 motes stopped transmitting data. It seems the radio stopped working
on all the 4 motes I have. I think the motes are getting programmed
incorrectly. I had no such problem earlier. Do you think ther
Hello Mr.Schippling and other friends
I checked the TOSBase code and all the hardware and they are working
fine. I programmed it such that they are working at the same frequencey.
Infact I used another computer with tinyos-1.x installed on it and ran the
tests. It worked on that computer. But ti
I'd expect that something has gone wrong with your TOSBase code,
or the basestation hardware, rather than _all_ the motes. Start
by checking each component. And make sure you use the same freq
in all your compiles...you can put that CFLAGS define in the
Makelocal file so you don't have to type it
Hello Mr.Schippling and other friends
I checked the TOSBase code and all the hardware and they are working
fine. I programmed it such that they are working at the same frequencey.
Infact I used another computer with tinyos-1.x installed on it and ran the
tests. It worked on that computer. But ti
Hi Ali,
This sounds like a problem that is extremely difficult to find. Do you
get the same output when compiling the same program on the two different
machines? Do you have the same version of the tools installed (ncc -v)?
Do you have the same version of the tinyos system files? (same rpm, both
u