Thanks Zoli, that was what was failing me.
Now it works correctly.
regards
Juanjo
El sáb, 30 ene 2021 a las 15:34, Zoltan Csahok () escribió:
> Do you have this line in your config?
>
> RADIO_CONTROL
>
> At least in the excerpt it is missing. (there is a similar one, but it has
> no underscore a
Hi Fred,
Am Sat, 30 Jan 2021 14:19:59 +0100
schrieb Fred Siegmund :
> Also I noticed that logcfg.dat gets copied to the /bin directory and
> used from there. Seems to be new.
>
maybe by accident TLf got started there?
It normally assumes to be started from a contest working directory. If
there
Do you have this line in your config?
RADIO_CONTROL
At least in the excerpt it is missing. (there is a similar one, but it has no underscore and is commented out)
73,
Zoli
##
#RADIO CONTROL
RIGMODEL=378
RIGSPEED=9600
RIGPORT=/dev/ttyUSB0
###
rigctl(d), Hamlib 3.3
El sáb, 30 ene 2021 a las 14:30, Ervin Hegedüs ()
escribió:
> Hi Juanjo,
>
> On Sat, Jan 30, 2021 at 02:07:17PM +, Juanjo EA8BGO wrote:
> > Dear Friends.
> >
> > I cannot configure the CAT of my IC-7610. I know that the hamlib works
> > since in the CAT of the CQRLog I
Hi Juanjo,
On Sat, Jan 30, 2021 at 02:07:17PM +, Juanjo EA8BGO wrote:
> Dear Friends.
>
> I cannot configure the CAT of my IC-7610. I know that the hamlib works
> since in the CAT of the CQRLog I have no problem, I do not have a
> configuration problem in the FLRig either.
>
> ##
Dear Friends.
I cannot configure the CAT of my IC-7610. I know that the hamlib works
since in the CAT of the CQRLog I have no problem, I do not have a
configuration problem in the FLRig either.
##
#RADIO CONTROL
RIGMODEL=378
RIGSPEED=9600
RIGPORT=/dev/ttyUSB0
#
Hi Zoli, just build from master. Working very well, thanks.
Unfortunately, the bandmap seems not to be very stable, esp. under high
spot load from reverse beacon. This was not the case in my previous
master build but did also not improve. It seg faults quite often.
Also I noticed that logcfg.d
