Kenny,
I am shunt feeding a 120 ft. tower on 160 with 8 ft. mast out the top with a
432, 20 el antenna at 128 ft. At 115 ft. is a 2 el 40. You can see it on my
QRZ page.
Measurements show it at 122 degs. I am using a single wire attached at 70 ft.
The spacing from the tower is about 2 ft
It's doubtful that 4.3-10 will ever be popular for larger cables,
because large diameter feedlines in the cellular industry are no longer
being installed. It's all Remote Radios behind the antennas, and short
1/2" jumpers.
So be happy with N or 7-16 for your main lines. I recommend 7-16 of cou
Hi Tree, many thanks for the background on the dream beams! QSL on the
effective tower length. ON4UNs book says aunt feeding will work up to 140
degrees. My friend is doing the modeling and it’s hard to imagine we’re more
than 120 degrees. We’ll see. Fingers crossed
Regards , Kenny K2KW
> On
John,
I am not famillar with the 4.3-10 jacks so my response me not be on target.
I only use RG 400 inside my shack or outside in WX proof boxed as inerr jumpers
I use ones from on FleaBay from China 10 pc PL259 mail for 11.95 free
shipping crimp/solder and use heat shrink fo
I want to thank everyone for their advice, both on and off this reflector!
I am sending this drone back for a refund. It is uncontrollable in any
direction. I don't know how it got so many good reviews.
73, Mike
www.w0btu.com
On Tue, Nov 27, 2018, 2:32 PM Mike Waters wrote:
> ...
> This is the
This unfortunately lost its purpose... :
http://www.arrl.org/system/dxcc/view/DXCC-160M-20181210-A4.pdf
A couple of years on the first page will be only representatives of the
former socialist countries.
uy0zg писал 2018-12-10 19:16:
Hello Victor!
This is not your topic.
I hope
Hi Petr,
Mixed up the name, sorry.
CU on the band
--
73, Victor Goncharsky US5WE/K1WE (UW5W in VHF contests, ex UB5WE), P.E.
UARL Technical and VHF Committies
DXCC Honor Roll #1 (Mixed, Phone), 9BDXCC, 8BWAS
DXCC card checker (160 meters).
_
Searchable Archives: http://www.conte
Hi Jarda,
That call OK1YQ is on the front page, so we have the answer, thanks.
Please pass our greetings to our old friend Milosh OK1MP.
73/88 Vic US5WE and Helen UR5WA
>Понедельник, 10 декабря 2018, 17:08 UTC от Petr Ourednik :
>
>Hi all,
>
>Jarda, OK1RD is still active.
>Contact is here: http://
Hello Victor!
This is not your topic.
I hope that American topbender will achieve the truth without your
participation.
When will Victor have RX antennas?
Will you be an honest amateur radio?
Nick, UY0ZG
Victor Goncharsky via Topband писал 2018-12-10 18:11:
HI folks,
I've problems wi
Hi all,
Jarda, OK1RD is still active.
Contact is here: http://www.ok1rd.com/
73 - Petr, OK1RP
On Mon, Dec 10, 2018, at 5:11 PM, Victor Goncharsky via Topband wrote:
> HI folks,
> I've problems with TOR browser in Ubuntu 16 so could not read mail.ru
> emails blocked by UR government, including t
Some anecdotal info on use of Steppir antennas on loaded towers.
I have never heard of anyone experiencing arcing. This also includes using
other antennas with isolated elements (like KLM). There just isn't going
to be a potential difference.
I have helped several locals load their towers with
HI folks,
I've problems with TOR browser in Ubuntu 16 so could not read mail.ru emails
blocked by UR government, including the ones from this reflector for quite a
long time. The problem has been solved.
As you probably know the licensing authority in Czech Republic started to
reissue the old 2X
Hi All, we’re planning on gamma loading a 130’ tower with a stack of StepIR
antennas using a cage for the shunt wire. We have modeled the tower. Question:
is the model sufficient to determine the gamma wire height? Or is the
procedure to use a single wire to per the model height first to fin
A few months ago I purchased a few sample 4.3-10 jacks and plugs. I have
not tried them yet but the jacks are close in size to N/UHF so replacement
should be easy. At the time they were a little difficult to find but they
seem to be gaining popularity. I think Arunas is correct that they will
soon
Hi Frank,
4.3-10 can't be so expensive if compare new to new. E.g. 7/16 to 4.3-10
"brand" adapter bulk price is 10-15% higher than N to 7/16, also price
of few meters prefabricated "jumper cables" with 4.3-10 vs 7/16 differs
in 10-15%.
I hope it revers soon as and also cellular antenna life spa
15 matches
Mail list logo
