>
> I have the general coverage module in my K3 and I can report that it works
> very well on the BC band as well as MW. I do not have the AM filter but AM
> still sounds OK.
>
K3 guys - dont forget you have synchronous AM detection on your K3s.
When in AM mode, hold in the ALT button (rig
Just an FYI: If you have the FM filter installed that will work for AM
too. That's what I use for occasional BC band listening on my K3 since I
don't have an AM filter installed.
-Bill KB8WYP
> I have the general coverage module in my K3 and I can report that it
works
> very well on the BC ban
I have the general coverage module in my K3 and I can report that it works
very well on the BC band as well as MW. I do not have the AM filter but AM
still sounds OK.
Bill VE3NH
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus Database: 2113/4866
K3 and RX BC AM
On Mon, 2012-03-12 at 16:09 +0700, Jo, YC0LOW wrote:
> My Elecraft K3 has no AM filters installed. I tried to RX AM broadcast
> stations on MW band but had no success.
> I'd be grateful if you could advice me to add it on, or, is there a way to
> do it as is, now ps
On Mon, 2012-03-12 at 16:09 +0700, Jo, YC0LOW wrote:
> My Elecraft K3 has no AM filters installed. I tried to RX AM broadcast
> stations on MW band but had no success.
> I'd be grateful if you could advice me to add it on, or, is there a way to
> do it as is, now pse?
> I need it as features to che
The K3 sensitivity falls off severely below 160 meters. But if you have the IF
option (KXV3)
which provides a receive antenna port it does not have the filtering, and there
is plenty
of sensitivity over the whole band (0.5-1.7 MHz). The KXV3 is very useful for
160 meter
use as it allows use o
My Elecraft K3 has no AM filters installed. I tried to RX AM broadcast
stations on MW band but had no success.
I'd be grateful if you could advice me to add it on, or, is there a way to
do it as is, now pse?
I need it as features to check the 160m RX antenna directions in the coming
YB8Y DXpedition