I'm hearing a lot of noise with my triangle array. I was hearing it
close to the house so I relocated 100' away albeit 10-15 feet lower.
Unfortunately I can not put it in a clearing and there are trees
around it, I cut down several that were within 10' of the elements. I
am using flooded coax
Clarification; The Tx antenna is 350' from the house, the triangle
array is 75' from the radial plate. I have 60 130' radials, half on
the salt marsh.
snip
By necessity, the
transmit antenna is 75' away and some of the 130' radials on the
ground run fairly close to the Rx array. I find the
an attenuator.
Gary
KA1J
Is that rail line electrified?
Carl
KM1H
- Original Message -
From: Gary Smith g...@ka1j.com
To: topband@contesting.com
Sent: Thursday, November 29, 2012 11:52 AM
Subject: Topband: High noise with Rx antennae
I'm hearing a lot of noise with my
a pre on the low bands
sometimes use an attenuator.
Gary
KA1J
Is that rail line electrified?
Carl
KM1H
- Original Message -
From: Gary Smith g...@ka1j.com
To: topband@contesting.com
Sent: Thursday, November 29, 2012 11:52 AM
Subject: Topband: High noise
To: topband@contesting.com
Sent: Thursday, November 29, 2012 11:52 AM
Subject: Topband: High noise with Rx antennae
I'm hearing a lot of noise with my triangle array. I was hearing
it close to the house so I relocated 100' away albeit 10-15 feet
lower. Unfortunately I can
, November 29, 2012 1:03 PM
Subject: Re: Topband: High noise with Rx antennae
yes it is, although the quietest directions are to the N, NE NW
which would make those directions the worst if it were the rail
lines.
I'm finding that the Rx triangle has more noise than the 160 Inv-V
and that doesn't
