On Wed, Apr 01, 2020 at 12:49:24PM +0530, Amit Singh Tomar wrote:
> This commit adds common arch support for Actions Semi Owl
> series SoCs and removes the Bubblegum96 board files.
>
> Reviewed-by: Andre Przywara
> Signed-off-by: Amit Singh Tomar
Reviewed-by: Manivannan Sadhasivam
Thanks,
Man
From: Chen-Yu Tsai
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit
card size development board based on the Rockchip RK3328 SoC, with:
- 1/2/4 GB DDR4 DRAM
- eMMC connector for optional module
- micro SD card slot
- 1 x USB 3.0 host port
- 2 x USB 2.0 host port
From: Chen-Yu Tsai
Hi everyone,
This is v2 of my ROC-RK3328-CC series. Changes from v1 are mainly
dropping the custom board target, and dealing with the pinmuxing
through proper use of DM regulators / GPIO / pinctrl in SPL.
This series adds proper support for Firefly / Libre Computer ROC-RK3328
From: Chen-Yu Tsai
USB 3.0 is only supported in U-boot, not in the Linux kernel where the
device tree files are ultimately synced from. While the xhci node was
moved, the external vbus regulator was not.
Move it as well.
Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dts
From: Chen-Yu Tsai
This syncs rk3328 device tree files from the Linux kernel next-20200324.
The last commit to touch these files is:
b2411befed60 ("arm64: dts: add bus to rockchip amba nodenames")
Additional changes not yet in the Linux kernel include:
arm64: dts: rockchip: rk3328: dro
From: Chen-Yu Tsai
This syncs the rk3328 clock header file from Linux kernel next-20200324,
to support newer hardware blocks when syncing the device tree files.
The last non-merge commit to touch it was
0dc14b013f79 ("clk: rockchip: add clock id for watchdog pclk on rk3328")
Reviewed-by: K
From: Chen-Yu Tsai
The device tree file for rk3328-evb in the Linux kernel does not have
gmac2io enabled. Instead, gmac2phy is enabled, but that is not supported
in U-boot.
Move the gmac2io related nodes to rk3328-evb-u-boot.dtsi to preserve the
current functionality. When the device tree files
From: Chen-Yu Tsai
This syncs the rk3328 power domain header file from Linux kernel
next-20200324, to support newer hardware blocks when syncing the
device tree files.
The last non-merge commit to touch it was
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to
files wit
Hi Tom,
This PR includes the following changes for v2020.04 release:
- verdin-imx8mm board reST documentation update
- Intel Edison board ACPI table I2C/USB minor updates
- Fix a regression of ns16550 serial driver that breaks Intel Edison
The following changes since commit e0718b3ab754860bd4767
This is a small fix for current release (2020.04)
The following changes since commit e0718b3ab754860bd47677e6b4fc5b70da42c4ab:
Merge tag 'dm-pull-1apr20' of git://git.denx.de/u-boot-dm (2020-04-01
14:29:21 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sh.git master
On Wed, 1 Apr 2020 at 15:45, Peter Robinson wrote:
> Enable EFI_RNG_PROTOCOL by default if DM_RNG is set.
>
> Signed-off-by: Peter Robinson
> ---
>
> I think it makes sense to enable EFI_RNG_PROTOCOL by default if a config
> has enabled both DM_RNG and UEFI.
>
Acked-by: Sughosh Ganu
-sughosh
On Tue, 31 Mar 2020 at 15:10, Lin Jinhan wrote:
> Add rng node in rk3399-u-boot.dtsi and enable it in
> rk3399-evb-u-boot.dtsi.
>
> Signed-off-by: Lin Jinhan
>
For the series
Reviewed-by: Sughosh Ganu
I guess Kever can pick it up directly in the rockchip tree. Thanks.
-sughosh
> ---
> a
Hello Jagan,
> -Original Message-
> From: Jagan Teki
> Sent: Saturday, April 4, 2020 11:45 PM
> To: Sagar Kadam
> Cc: Bin Meng ; Palmer Dabbelt
> ; U-Boot Mailing List ; linux-
> amarula
> Subject: Re: [U-Boot] [PATCH v2 5/5] sifive: fu540: Enable spi-nor flash
> support
>
> [External
Hi Bin,
On Mon, Nov 18, 2019 at 8:19 AM Bin Meng wrote:
>
> Hi Segar Kadam,
>
> On Mon, Nov 18, 2019 at 4:59 AM Sagar Kadam wrote:
> >
> >
> > Hello Jagan/Bin,
> >
> > > -Original Message-
> > > From: U-Boot On Behalf Of Bin Meng
> > > Sent: Monday, November 11, 2019 8:02 PM
> > > To: J
Hi Sagar,
On Mon, Nov 18, 2019 at 2:29 AM Sagar Kadam wrote:
>
>
> Hello Jagan/Bin,
>
> > -Original Message-
> > From: U-Boot On Behalf Of Bin Meng
> > Sent: Monday, November 11, 2019 8:02 PM
> > To: Jagan Teki
> > Cc: Palmer Dabbelt ( Sifive) ; U-Boot Mailing List > b...@lists.denx.de
On Sat, Apr 4, 2020 at 6:32 PM Andy Shevchenko
wrote:
>
> On Fri, Apr 03, 2020 at 06:35:32PM -0700, Bin Meng wrote:
> > Currently the driver gets ns16550 base address in the driver
> > probe() routine, which may potentially break any ns16550 wrapper
> > driver that does additional initialization b
Synchronize R-Car Gen2 device trees with Linux 5.6.2,
commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a .
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a7790-lager.dts| 23 +--
arch/arm/dts/r8a7790-stout.dts| 9 +-
arch/arm/dts/r8a7790.dtsi
Currently, if usb is disabled the following error is produced:
CC drivers/usb/host/ohci-hcd.o
drivers/usb/host/ohci-hcd.c: In function ‘usb_lowlevel_init’:
drivers/usb/host/ohci-hcd.c:2057:35: error: ‘CONFIG_SYS_USB_OHCI_REGS_BASE’
undeclared (first use in this function); did you mean ‘CONF
On Thu, Apr 2, 2020 at 4:21 PM Fabio Estevam wrote:
> U-Boot SPL 2020.04-rc4-00061-ge0718b3ab7 (Apr 02 2020 - 16:14:22 -0300)
> Normal Boot
> WDT: Not found!
> Trying to boot from MMC2_2
> spl: mmc init failed with error: -70
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RE
To access the PHY, the MAC registers must be initialized. Call the init
function in probe() to make it so, otherwise the PHY ID readout returns
all zeroes.
Signed-off-by: Marek Vasut
Cc: Joe Hershberger
Cc: Nobuhiro Iwamatsu
---
NOTE: This is for 2020.04
---
drivers/net/sh_eth.c | 4
1 fi
> Il 2 aprile 2020 alle 20.54 Simon Glass ha scritto:
>
>
> Hi Dario,
>
> On Wed, 1 Apr 2020 at 13:34, wrote:
> >
> >
> > > Il 31 marzo 2020 alle 1.57 Simon Glass ha scritto:
> > >
> > >
> > > On Sun, 29 Mar 2020 at 10:05, Dario Binacchi wrote:
> > > >
> > > > Now reading a 32 bit value from
Implement get_b_max() for the Renesas R-Car SDHI controller driver, limit
the b_max per hardware capabilities such that select Gen2 controllers have
16bit block transfer limit, the rest has 32bit block transfer limit and on
Gen3, the block transfer limit on addresses above the 32bit boundary is set
Add getter function which permits adjusting the maximum number of
blocks that could be read in a single sustained read transfer based
on the location of the source/target buffer and length, before such
transfer starts.
This is mainly useful on systems which have various DMA restrictions
for differ
Increase the malloc area size significantly to cater for bounce buffer
used by the SDHI driver.
Signed-off-by: Marek Vasut
Cc: Daniel Schwierzeck
Cc: Masahiro Yamada
Cc: Peng Fan
Cc: Simon Glass
Cc: Tom Rini
---
V2: No change
---
include/configs/rcar-gen3-common.h | 2 +-
1 file changed, 1
Add extended version of the bounce_buffer_start(), which permits passing in
a custom alignment checker function for the buffer. This is useful e.g. on
systems with various DMA restrictions and where the checker function might
be more complex than a simple CPU cache alignment check.
Signed-off-by:
The R-Car SDHI DMA controller has various restrictions. To work around
those restrictions without falling back to PIO, implement bounce buffer
with custom alignment check function which tests for those limitations.
Signed-off-by: Marek Vasut
Cc: Daniel Schwierzeck
Cc: Masahiro Yamada
Cc: Peng F
On Fri, Apr 03, 2020 at 06:35:32PM -0700, Bin Meng wrote:
> Currently the driver gets ns16550 base address in the driver
> probe() routine, which may potentially break any ns16550 wrapper
> driver that does additional initialization before calling
> ns16550_serial_probe().
>
> Things are complicat
If the DM_ETH is enabled and netdev.h is included somewhere, the
struct eth_device may not be defined, yet it is used in the header
file as an argument to fecmxc_register_mii_postcall. Add forward
declaration to remove the warning.
Signed-off-by: Marek Vasut
Cc: Joe Hershberger
---
include/netd
28 matches
Mail list logo