From: Konstantin Porotchkin
Add support for regulator-force-boot-off DT property.
This property can be used by the board/device drivers for
turning off regulators on early init stages as pre-requisite
for the other components initialization.
Signed-off-by: Konstantin Porotchkin
Signed-off-by: S
Hi Stefan,
On 4/9/21 2:20 PM, Stefan Roese wrote:
> Hi Jaehoon,
>
> On 09.04.21 02:37, Jaehoon Chung wrote:
>> On 4/9/21 7:52 AM, Jaehoon Chung wrote:
>>> Hi Stefan,
>>>
>>> On 4/8/21 6:20 PM, Stefan Roese wrote:
From: Konstantin Porotchkin
Add support for regulator-force-boot-off
Hi Heinrich,
Has there been any progress in getting the EFI erors fixed so that this can
be committed? There seems to be little point in my refreshing this patch
until that is done.
Thanks,
-Joel
On Mon, Mar 22, 2021 at 10:37 AM Heinrich Schuchardt
wrote:
> On 09.02.21 04:36, Joel Peshkin w
On 4/8/21 9:08 AM, Marcel Ziswiler wrote:
Hi Marek
Hi,
Upon compiling I noticed the following but I do realize that it is not this
patch set which introduced this
issue.
drivers/usb/host/ehci-mx6.c: In function ‘ehci_usb_probe’:
drivers/usb/host/ehci-mx6.c:686:30: warning: cast from pointer
On Fri, Apr 9, 2021 at 1:14 PM Tim Harvey wrote:
>
> On Fri, Apr 9, 2021 at 1:08 PM Tim Harvey wrote:
> >
> > On Fri, Apr 9, 2021 at 1:00 PM Stefano Babic wrote:
> > >
> > > Hi Tim,
> > >
> > > On 09.04.21 21:52, Tim Harvey wrote:
> > > > On Thu, Apr 8, 2021 at 1:57 PM wrote:
> > > >>
> > > >>>
On Fri, Apr 9, 2021 at 1:53 PM Tom Rini wrote:
>
> On Fri, Apr 09, 2021 at 03:24:41PM -0500, Adam Ford wrote:
> > On Fri, Apr 9, 2021 at 2:20 PM Alex G. wrote:
> > >
> > > Hi Simon
> > >
> > > On 4/8/21 6:55 PM, Simon Glass wrote:
> > > > Hi Alexandru,
> > > >
> > > > On Fri, 9 Apr 2021 at 04:56,
On 4/9/21 11:46 PM, lg...@hotmail.com wrote:
From: Joe Xue
The command is to query and show mac address of a specific ipAddress.
Signed-off-by: Joe Xue
---
cmd/Kconfig | 6 ++
cmd/net.c | 36
doc/usage/arp.rst | 31 +
Hi Sughosh,
On Fri, 9 Apr 2021 at 23:27, Sughosh Ganu wrote:
>
> hi Simon,
>
> On Fri, 9 Apr 2021 at 05:26, Simon Glass wrote:
>>
>> Hi Sughosh,
>>
>> On Thu, 8 Apr 2021 at 18:53, Sughosh Ganu wrote:
>> >
>> > hi Simon,
>> >
>> > On Wed, 7 Apr 2021 at 21:44, Simon Glass wrote:
>> >>
>> >> Hi,
On Sat, 10 Apr 2021 at 04:02, Patrick Delaunay
wrote:
>
> Update the debug trace for the reserved video memory to KB as indicated
> in the message with "%luk"; before the patch the computed size
> gd->relocaddr - addr is in bytes.
>
> This patch aligns the debug trace in reserve_video() with other
On Fri, Apr 09, 2021 at 03:24:41PM -0500, Adam Ford wrote:
> On Fri, Apr 9, 2021 at 2:20 PM Alex G. wrote:
> >
> > Hi Simon
> >
> > On 4/8/21 6:55 PM, Simon Glass wrote:
> > > Hi Alexandru,
> > >
> > > On Fri, 9 Apr 2021 at 04:56, Alexandru Gagniuc
> > > wrote:
> > >>
> > >> This reverts commit
Am 9. April 2021 20:45:36 MESZ schrieb lg...@hotmail.com:
>From: Joe Xue
>
>The command is to query and show mac address of a specific ipAddress.
Dear Joe,
please, add a man-page for the command in /doc/usage/.
>
>Signed-off-by: Joe Xue
>---
>
> cmd/Kconfig | 6 ++
> cmd/net.c | 36 +
On Fri, Apr 9, 2021 at 2:20 PM Alex G. wrote:
>
> Hi Simon
>
> On 4/8/21 6:55 PM, Simon Glass wrote:
> > Hi Alexandru,
> >
> > On Fri, 9 Apr 2021 at 04:56, Alexandru Gagniuc wrote:
> >>
> >> This reverts commit 38d6b7ebdaee3e0e8426ef1b9df88bdce8ae2e75.
> >>
> >> struct global_data contains a poin
On Fri, Apr 9, 2021 at 1:08 PM Tim Harvey wrote:
>
> On Fri, Apr 9, 2021 at 1:00 PM Stefano Babic wrote:
> >
> > Hi Tim,
> >
> > On 09.04.21 21:52, Tim Harvey wrote:
> > > On Thu, Apr 8, 2021 at 1:57 PM wrote:
> > >>
> > >>> In preparation for dm conversion convert to OF_CONTROL by adding FIT
>
On Fri, Apr 9, 2021 at 1:00 PM Stefano Babic wrote:
>
> Hi Tim,
>
> On 09.04.21 21:52, Tim Harvey wrote:
> > On Thu, Apr 8, 2021 at 1:57 PM wrote:
> >>
> >>> In preparation for dm conversion convert to OF_CONTROL by adding FIT image
> >>> support and multi dtb.
> >>> Add a board_fit_config_name_m
Hi Tim,
On 09.04.21 21:52, Tim Harvey wrote:
On Thu, Apr 8, 2021 at 1:57 PM wrote:
In preparation for dm conversion convert to OF_CONTROL by adding FIT image
support and multi dtb.
Add a board_fit_config_name_match to match the dtb based off of EEPROM
model.
Signed-off-by: Tim Harvey
Appli
On Thu, Apr 8, 2021 at 1:57 PM wrote:
>
> > In preparation for dm conversion convert to OF_CONTROL by adding FIT image
> > support and multi dtb.
> > Add a board_fit_config_name_match to match the dtb based off of EEPROM
> > model.
> > Signed-off-by: Tim Harvey
> Applied to u-boot-imx, master, th
Hi Simon
On 4/8/21 6:55 PM, Simon Glass wrote:
Hi Alexandru,
On Fri, 9 Apr 2021 at 04:56, Alexandru Gagniuc wrote:
This reverts commit 38d6b7ebdaee3e0e8426ef1b9df88bdce8ae2e75.
struct global_data contains a pointer to the bd_info structure. This
pointer was populated spl_set_bd() to a pre-a
On Fri, Apr 9, 2021 at 3:15 AM Matthias Brugger wrote:
>
>
> On 09/04/2021 10:14, Nicolas Saenz Julienne wrote:
> > [ Adding Matthias for the SMBIOS part ]
> >
> > On Fri, 2021-04-09 at 00:00 -0700, Roman Shaposhnik wrote:
> >> On Thu, Apr 8, 2021 at 8:59 PM Sean Anderson wrote:
> >>> On 4/8/21
On Fri, Apr 09, 2021 at 11:55:52AM +1200, Simon Glass wrote:
> +Tom Rini
>
> Hi Nathan,
>
> On Fri, 9 Apr 2021 at 06:23, Nathan Chancellor wrote:
> >
> > Hi Simon,
> >
> > Apologies if this is not the proper way to report a regression, this is my
> > first
> > time interacting with the U-Boot c
07 -0400)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git
> tags/u-boot-imx-20210409
>
> for you to fetch changes up to 2fc93e5bafdae7cf6373479e054e9f3943fde23c:
>
> imx: bootaux fix elf loading (2021-
Hi folks,
Correct me if I'm wrong, like Rick mentioned, i/dcache
enable/disable() is only called on the main hart. Right now the dummy
i/dcache enable/disable are empty and shared among all riscv CPU. The
ax25 is the only one that has its own implementation for now.
FU540/FU740 also leverages the
Update the debug trace for the reserved video memory to KB as indicated
in the message with "%luk"; before the patch the computed size
gd->relocaddr - addr is in bytes.
This patch aligns the debug trace in reserve_video() with others
functions, for example on stm32mp157c-dk2:
- Reserving 308019
Le 09/04/2021 à 16:12, Rasmus Villemoes a écrit :
On powerpc, time as measured by get_timer() ceases to pass when
interrupts are disabled (since on powerpc get_timer() returns the
value of a volatile variable that gets updated via a timer
interrupt). That in turn means the watchdog_reset() fun
On 4/9/21 3:41 PM, Andy Shevchenko wrote:
> On Fri, Apr 09, 2021 at 09:13:12AM -0400, Sean Anderson wrote:
>> On 4/9/21 8:05 AM, Patrice CHOTARD wrote:
>>> On 4/9/21 1:01 PM, Andy Shevchenko wrote:
On Fri, Apr 9, 2021 at 1:32 PM Patrice CHOTARD
wrote:
> On 4/9/21 11:48 AM, Andy Sh
From: Camelia Groza
Enable DM_ETH and DM_MDIO for the T1042D4RDB.
Signed-off-by: Camelia Groza
---
configs/T1042D4RDB_NAND_defconfig| 3 +++
configs/T1042D4RDB_SDCARD_defconfig | 3 +++
configs/T1042D4RDB_SECURE_BOOT_defconfig | 4 +++-
configs/T1042D4RDB_SPIFLASH_defconfig| 3
From: Camelia Groza
Add the FMan v3 nodes for the T1042D4RDB. The nodes are copied over with
little modification from the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t1042d4rdb.dts | 55 -
1 file changed, 54 insertions(+), 1 delet
From: Camelia Groza
Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T1042 SoC.
The device tree nodes are copied over with little modification
from the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t1042si-post.dtsi | 46 ++
1 fil
From: Camelia Groza
Enable DM_ETH and DM_MDIO for the T4240RDB.
Signed-off-by: Camelia Groza
---
configs/T4240RDB_SDCARD_defconfig | 3 +++
configs/T4240RDB_defconfig| 3 +++
2 files changed, 6 insertions(+)
diff --git a/configs/T4240RDB_SDCARD_defconfig
b/configs/T4240RDB_SDCARD_def
From: Camelia Groza
Add the FMan v3 nodes for the T4240RDB. The nodes are copied over with
little modification from the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t4240rdb.dts | 142 +-
1 file changed, 141 insertions(+), 1 deleti
From: Camelia Groza
When two FMan's are present on a board, the MDIO nodes are found at the
same offsets inside each FMan. This causes "non unique device name"
errors when registering the MDIO nodes under the second FMan. Fix this
by updating the offsets of the MDIO nodes to include the parent FM
From: Camelia Groza
Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T4240 SoC.
The device tree nodes are copied over with little modification
from the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t4240si-post.dtsi | 101 +
1 fil
From: Camelia Groza
Enable DM_ETH and DM_MDIO for the T2080RDB.
Signed-off-by: Camelia Groza
---
configs/T2080RDB_NAND_defconfig | 3 +++
configs/T2080RDB_SDCARD_defconfig | 3 +++
configs/T2080RDB_SPIFLASH_defconfig | 3 +++
configs/T2080RDB_defconfig | 3 +++
4 files changed,
From: Camelia Groza
Disable the FMan mEMAC 5 and 6 nodes from the fdt since they are not
available under the supported RCW. Also disable the associated
"fsl,dpa-ethernet" nodes that reference them.
This is a simplified version of the fdt_fixup_fman_ethernet call for
use under DM_ETH.
Signed-off
From: Camelia Groza
Add the FMan v3 nodes for the T2080RDB. The nodes are copied over with
little modification from the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t2080rdb.dts | 69 ++-
1 file changed, 68 insertions(+), 1 deletio
From: Camelia Groza
Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T2080 SoC.
The device tree nodes are copied over with little modification from
the Linux kernel source code.
Signed-off-by: Camelia Groza
---
arch/powerpc/dts/t2080si-post.dtsi | 51 ++
1 fil
Apologies to those who received this series twice off list due to an
e-mail misconfiguration.
This patch series enables DM_ETH and DM_MDIO on the T2080RDB, T4240RDB and
T1042D4RDB DPAA1 PowerPC boards. The necessary FMan v3 Ethernet and MDIO
nodes are added to each platform's SoC and board device
On powerpc, time as measured by get_timer() ceases to pass when
interrupts are disabled (since on powerpc get_timer() returns the
value of a volatile variable that gets updated via a timer
interrupt). That in turn means the watchdog_reset() function provided
by CONFIG_WDT ceases to work due to the
Hi Tom
Please pull the STM32 related patches for u-boot/master, v2021.07:
u-boot-stm32-20210409
CI status: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/7103
Thanks,
Patrice
The following changes since commit b46dd116ce03e235f2a7d4843c6278e1da44b5e1:
Prepare v2021.04
On Fri, Apr 09, 2021 at 09:13:12AM -0400, Sean Anderson wrote:
> On 4/9/21 8:05 AM, Patrice CHOTARD wrote:
> > On 4/9/21 1:01 PM, Andy Shevchenko wrote:
> > > On Fri, Apr 9, 2021 at 1:32 PM Patrice CHOTARD
> > > wrote:
> > > > On 4/9/21 11:48 AM, Andy Shevchenko wrote:
> > > > > On Fri, Apr 9, 202
On 4/9/21 4:16 AM, Rick Chen wrote:
Hi Sean ,Bin
From: Bin Meng [mailto:bmeng...@gmail.com]
Sent: Tuesday, April 06, 2021 5:16 PM
To: Sean Anderson
Cc: Green Wan; Rick Jian-Zhi Chen(陳建志); Paul Walmsley; Pragnesh Patel; Bin
Meng; Simon Glass; Atish Patra; Leo Yu-Chi Liang(梁育齊); Brad Kim; U-Boot
Am Freitag, 9. April 2021, 14:35:11 CEST schrieb matthias@kernel.org:
> From: Matthias Brugger
>
> Enalbe this driver to allow U-Boot to get SMBIOS table information from
^ typo
Other than that,
Acked-by: Fabian Vogt
Cheers,
Fabian
> a device tree node.
>
> Signed-off-by: Matthias B
Am Freitag, 9. April 2021, 14:35:10 CEST schrieb matthias@kernel.org:
> From: Matthias Brugger
>
> At present SMBIOS tables are emtpy,
^ typo
> which breaks some use-cases that rely on that.
Can you give an example?
> Add some minimal information to
Isn't it
On 4/9/21 8:05 AM, Patrice CHOTARD wrote:
On 4/9/21 1:01 PM, Andy Shevchenko wrote:
On Fri, Apr 9, 2021 at 1:32 PM Patrice CHOTARD
wrote:
On 4/9/21 11:48 AM, Andy Shevchenko wrote:
On Fri, Apr 9, 2021 at 12:28 PM Patrice CHOTARD
wrote:
On 4/9/21 11:16 AM, Andy Shevchenko wrote:
On Fri, A
Hi Marek
On 4/9/21 2:43 PM, Patrick DELAUNAY wrote:
> Hi Marek,
>
> On 3/31/21 2:15 PM, Marek Vasut wrote:
>> Split up get_soc_name(), clean the decoding up a bit, and set up
>> environment variables which contain the SoC type, package, revision.
>> This is useful on SoMs, where multiple SoC opti
Hi Marek,
On 3/31/21 2:15 PM, Marek Vasut wrote:
Split up get_soc_name(), clean the decoding up a bit, and set up
environment variables which contain the SoC type, package, revision.
This is useful on SoMs, where multiple SoC options are populated.
Signed-off-by: Marek Vasut
Cc: Patrick Delaun
From: Matthias Brugger
Enalbe this driver to allow U-Boot to get SMBIOS table information from
a device tree node.
Signed-off-by: Matthias Brugger
---
configs/rpi_0_w_defconfig | 2 ++
configs/rpi_2_defconfig| 2 ++
configs/rpi_3_32b_defconfig| 2 ++
configs/rpi_3_b_plus_def
From: Matthias Brugger
At present SMBIOS tables are emtpy, which breaks some use-cases that
rely on that. Add some minimal information to fullfill this.
Signed-off-by: Matthias Brugger
---
arch/arm/dts/bcm283x-u-boot.dtsi | 20
1 file changed, 20 insertions(+)
diff --git
On 4/9/21 10:00 AM, Patrick Delaunay wrote:
The gpio reset assert/deassert delay are today harcoded in U-Boot driver
but the value should be read from DT.
STM32 use the generic binding defined in linux:
Documentation/devicetree/bindings/net/ethernet-phy.yaml
reset-gpios:
maxItems: 1
On 4/9/21 1:01 PM, Andy Shevchenko wrote:
> On Fri, Apr 9, 2021 at 1:32 PM Patrice CHOTARD
> wrote:
>> On 4/9/21 11:48 AM, Andy Shevchenko wrote:
>>> On Fri, Apr 9, 2021 at 12:28 PM Patrice CHOTARD
>>> wrote:
On 4/9/21 11:16 AM, Andy Shevchenko wrote:
> On Fri, Apr 9, 2021 at 10:37 AM
From: dillon min
All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot
for more information about art-pi, please goto:
https://art-pi.gitee.io/website/
Signed-off-by: dillon min
Reviewed-by: Patrice Chotard
---
v5: rem
From: dillon min
strsep will change data from original memory address,
in case the memory is in non-sdram/sram place, will
run into a bug(hang at SDRAM: )
just add a temporary array to store bank_name[] to fix this
bug.
Signed-off-by: dillon min
Reviewed-by: Patrice Chotard
---
v5: no changes
From: dillon min
This patchset has following changes:
- introduce stm32h750.dtsi to support stm32h750 value line
- add pin groups for usart3/uart4/spi1/sdmmc2
- add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
- add stm32h750i-art-pi.dts to support art-pi board
- add stm32h750i-art-pi-u-bo
From: dillon min
Replace upper case by lower case in i2c nodes name.
update dmamux1 register range.
Signed-off-by: dillon min
Reviewed-by: Patrice Chotard
---
v5: no changes
arch/arm/dts/stm32h743.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/stm
From: dillon min
Some instances are missing in current support of stm32h743 MCU. This commit
adds usart3/uart4 and sdmmc2 support.
Signed-off-by: dillon min
Reviewed-by: Patrice Chotard
---
v5: no changes
arch/arm/dts/stm32h743.dtsi | 30 ++
1 file changed, 30 ins
Hi,
> On 4/7/21 11:05 AM, zhengxunli wrote:
> > The Clocking Wizard IP supports clock circuits customized
> > to your clocking requirements. The wizard support for
> > dynamically reconfiguring the clocking primitives for
> > Multiply, Divide, Phase Shift/Offset, or Duty Cycle.
> >
> > Limited by
Hi Michal,
Thank you for your quick reply!
"Michal Simek" wrote on 2021/04/07 下午
08:35:18:
> "Michal Simek"
> 2021/04/07 下午 08:35
>
> To
>
> "zhengxunli" , ,
>
> cc
>
> , ,
>
> Subject
>
> Re: [PATCH 2/2] board: Add Zynq Mxic picozed development board support
>
> Hi,
>
> On 4/7/2
On 2021/04/09 11:58, Sean Anderson wrote:
>
> On 4/8/21 10:54 PM, Damien Le Moal wrote:
>> On 2021/04/09 11:13, Sean Anderson wrote:
>>> No other (real) clocks have the cpu clock as their parent; instead they are
>>> children of aclk. Move the clint clock under aclk to match them.
>>>
>>> Signed-o
On 2021/04/09 11:54, Damien Le Moal wrote:
> On 2021/04/09 11:13, Sean Anderson wrote:
>> No other (real) clocks have the cpu clock as their parent; instead they are
>> children of aclk. Move the clint clock under aclk to match them.
>>
>> Signed-off-by: Sean Anderson
>> ---
>>
>> (no changes sinc
On 2021/04/09 11:13, Sean Anderson wrote:
> No other (real) clocks have the cpu clock as their parent; instead they are
> children of aclk. Move the clint clock under aclk to match them.
>
> Signed-off-by: Sean Anderson
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - New
>
> drivers/cl
From: dillon min
This patch is intend to add support stm32h750 value line,
just add stm32h7-pinctrl.dtsi for extending, with following changes:
- rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
- move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi
- update stm32h743i-{disco,
From: dillon min
As different boards has their own sdram hw connection, mount different
sdram modules, so move sdram timing parameter and pin configuration
to their board device tree.
Signed-off-by: dillon min
Reviewed-by: Patrice Chotard
---
v5: no changes
arch/arm/dts/stm32h7-u-boot.dtsi
From: dillon min
These patches aim to adds u-boot support on art-pi board.
the board resources:
- stm32h750xbh6 128k flash, 1024k sram
- 32MiB sdram
- 16MiB spi flash
- 8MiB qspi flash
- onboard wifi, bt, fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
---
cha
On 2021/04/09 11:13, Sean Anderson wrote:
> After starting or setting the rate of a PLL, the enable bit must be set.
>
> This fixes a bug where the AI ram would not be accessible, because it
> requires PLL1 to be running.
>
> Signed-off-by: Sean Anderson
> ---
>
> (no changes since v1)
>
> dr
ot-imx.git
tags/u-boot-imx-20210409
for you to fetch changes up to 2fc93e5bafdae7cf6373479e054e9f3943fde23c:
imx: bootaux fix elf loading (2021-04-08 23:59:50 +0200)
u-boot-imx-20210409
---
- Secure Boot :
Hi Carl,
do you used git send-email for this ? It looks like the patch was
changed by your mailer, I cannot applied it with git am ("malformed
patch"). Can you check and resend, maybe with git send-email ?
Best regards,
SAtefano Babic
On 04.04.21 21:47, Carl Gelfand wrote:
Add environment v
hi Simon,
On Fri, 9 Apr 2021 at 05:26, Simon Glass wrote:
> Hi Sughosh,
>
> On Thu, 8 Apr 2021 at 18:53, Sughosh Ganu wrote:
> >
> > hi Simon,
> >
> > On Wed, 7 Apr 2021 at 21:44, Simon Glass wrote:
> >>
> >> Hi,
> >>
> >> On Wed, 7 Apr 2021 at 23:54, Sughosh Ganu
> wrote:
> >> >
> >> > Patch
> Pass "pfuze3000@8" in pmic_get() so that the PMIC node can
> be found in the devicetree.
> Signed-off-by: Fabio Estevam
> Reviewed-by: Jaehoon Chung
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DE
> Bitmap files should not be executable.
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Michael Trimarchi
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Manag
> Document SRC_GPR10 PERSIST_SECONDARY_BOOT functionality. This is useful for
> reliable bootloader A/B updates, as it permits switching between two copies
> of bootloader at different offsets of the same storage. The switch happens
> in case one copy is corrupted OR can be enforced by user. This f
> sel_input value for the following uart5 pins is
> different between i.MX6UL and i.MX6ULL:
> MX6_PAD_UART5_TX_DATA__UART5_DTE_RX
> MX6_PAD_UART5_RX_DATA__UART5_DCE_RX
> MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS
> MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
> MX6_PAD_CSI_DATA02__UART5_DCE_RTS
> As sel_input val
> Convert the Olimex Olinuxino board's support for MMC to driver model following
> Fabio Estevam's excellent example from:
> commit: 23013aa9619881290dbeb6217f1fab863869050e:
> mx23evk: Convert to driver model
> Signed-off-by: Trevor Woerner
Applied to u-boot-imx, master, thanks !
Bes
> From: Haibo Chen
> Some board like imx8mm-evkb, IO voltage switch from 3.3v to 1.8v need
> around 18ms, common code only delay 10ms, so need to delay extra 8ms.
> Otherwise voltage switch will timeout when wait for data0 line.
> This IO voltage switch time depends on board design, depend on the
> This reverts the arch/arm/mach-imx/imx_bootaux.c changes of commit
> 805b3cac1e0c. The loader function name was changed so that it does
> not clash with the generically available function in lib/elf.c.
> imx-bootaux loads an elf file linked for an auxilary core. Thus the
> loader function require
> Add the dts file for the Olimex Olinuxino from the linux kernel, and enable
> its use in this machine's defconfig.
> Signed-off-by: Trevor Woerner
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX
> From: Haibo Chen
> For FSL_USDHC, it do not implement VENDORSPEC_CKEN/PEREN/HCKEN/IPGEN, these
> are reserved bits. Instead, use VENDORSPEC_FRC_SDCLK_ON to gate on/off the
> card clock output.
> After commit b5874b552ffa ("mmc: fsl_esdhc_imx: add wait_dat0() support"),
> we meet SD3.0 card can't
> Enabled "fsl,legacy-bch-geometry" in U-Boot device tree overlay
> to match the legacy BCH geometry layout, which mainline Linux
> applies when "fsl,use-minimum-ecc" is not specified in the device
> tree.
> Reinstated SYS_NAND_ONFI_DETECTION, which when disabled, masked
> the mismatch on SOMs with
> From: Haibo Chen
> Common code already handle the voltage switch sequence based on spec,
> so remove the redundant voltage switch code.
> Signed-off-by: Haibo Chen
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
On Fri, Apr 9, 2021 at 1:32 PM Patrice CHOTARD
wrote:
> On 4/9/21 11:48 AM, Andy Shevchenko wrote:
> > On Fri, Apr 9, 2021 at 12:28 PM Patrice CHOTARD
> > wrote:
> >> On 4/9/21 11:16 AM, Andy Shevchenko wrote:
> >>> On Fri, Apr 9, 2021 at 10:37 AM Patrice Chotard
> >>> wrote:
...
> +
The ebreak instruction should generate a breakpoint exception.
Signed-off-by: Heinrich Schuchardt
---
cmd/riscv/exception.c | 10 ++
doc/usage/exception.rst | 3 +++
2 files changed, 13 insertions(+)
diff --git a/cmd/riscv/exception.c b/cmd/riscv/exception.c
index 9687cec812..7a08061
On 4/9/21 11:48 AM, Andy Shevchenko wrote:
> On Fri, Apr 9, 2021 at 12:28 PM Patrice CHOTARD
> wrote:
>> On 4/9/21 11:16 AM, Andy Shevchenko wrote:
>>> On Fri, Apr 9, 2021 at 10:37 AM Patrice Chotard
>>> wrote:
>
> ...
>
+ if (drv) {
+
On 09/04/2021 10:14, Nicolas Saenz Julienne wrote:
> [ Adding Matthias for the SMBIOS part ]
>
> On Fri, 2021-04-09 at 00:00 -0700, Roman Shaposhnik wrote:
>> On Thu, Apr 8, 2021 at 8:59 PM Sean Anderson wrote:
>>> On 4/8/21 8:18 PM, Roman Shaposhnik wrote:
Hi!
first time poster
Hi Patrick
On 4/6/21 9:27 AM, Patrick Delaunay wrote:
> Replace the remaining printf in setup_boot_mode() by log macro
> to handle filtering for log features.
>
> Signed-off-by: Patrick Delaunay
> ---
>
> arch/arm/mach-stm32mp/cpu.c | 10 +-
> 1 file changed, 5 insertions(+), 5 deletio
Hi Patrick
On 4/6/21 9:27 AM, Patrick Delaunay wrote:
> Align the uart number in the trace of setup_boot_mode() with the name of
> the uart/usart device (start at 1) and not with the instance value
> (start at 0), i.e. the serial device sequence number and the index in
> serial_addr[].
>
> Fixes:
Hi Patrick
On 4/2/21 2:05 PM, Patrick Delaunay wrote:
> Add support of TF-A FIP header in command stm32prog for all the boot
> partition and not only the STM32IMAGE.
>
> This patch is a preliminary patch to support FIP as second boot stage
> after TF-A BL2 when CONFIG_TFABOOT is activated for tru
Hi Alexandru
On 3/22/21 2:20 PM, Alexandru Gagniuc wrote:
> A now removed comment promises to "limit SYSRAM usage to first 128 KB".
> This would imply that only SYSRAM from 0x2ffc - 0x2ffe would be
> used. This is not what happens at all.
>
> First, SPL_MAX_SIZE is referenced from SPL_TEX
Hi Alexandru
On 3/22/21 2:20 PM, Alexandru Gagniuc wrote:
> CONFIG_SPL_BSS_START_ADDR is only used on a few mach- linker scripts.
> stm32mp1 uses the generic script under arch/arm/cpu/u-boot-spl.lds,
> which does not make use of this definition.
>
> The SPL BSS starts in SRAM, right after .text,
Hi Alexandru
On 3/22/21 2:19 PM, Alexandru Gagniuc wrote:
> Since commit 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for
> loading images"), FIT images must be malloc()'d before being loaded.
> The old size of 1 MiB is suitable for FIT images with u-boot and an
> FDT, but something contain
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> 7" OF is a capacitive touch 7" Open Frame panel solutions with
> - 7" AUO B101AW03 LVDS panel
> - EDT, FT5526 Touch
>
> MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
>
> MicroDev 2.0 is a general purpose miniature carrier board with CAN,
> L
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> MicroDev 2.0 is a general purpose miniature carrier board with CAN,
> LTE and LVDS panel interfaces.
>
> Genaral features:
> - Ethernet 10/100
> - USB Type A
> - Audio Out
> - microSD
> - LVDS panel connector
> - Wifi/BT (option)
> - UMTS LTE with
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
>
> General features:
> - STM32MP157AAC
> - Up to 1GB DDR3L-800
> - 512MB Nand flash
> - I2S
>
> MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
> boards for creating complete
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> Evaluation Board.
>
> Genaral features:
> - LCD 7" C.Touch
> - microSD slot
> - Ethernet 1Gb
> - Wifi/BT
> - 2x LVDS Full HD interfaces
> - 3x USB 2.0
> - 1x USB 3.0
> - HDMI Out
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> SPI Load isn't mandatory for STM32 builds.
>
> Let's imply instead of select it to get rid of build
> issues for non-SPI defconfigs.
>
> Reviewed-by: Patrick Delaunay
> Reviewed-by: Patrice Chotard
> Signed-off-by: Jagan Teki
> ---
> Changes fo
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3
> which has 32bits width 528000Khz frequency.
>
> Add DDR configuration via dtsi.
>
> Reviewed-by: Patrick Delaunay
> Reviewed-by: Patrice Chotard
> Signed-off-by: Jagan Teki
> ---
> Cha
Hi Jagan
On 3/16/21 5:22 PM, Jagan Teki wrote:
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> General features:
> - STM32MP157A
> - Up to 1GB DDR3L
> - 4GB eMMC
> - 10/100 Ethernet
> - USB 2.0 Host/OTG
> - I2S
> - MIPI DSI to LVDS
> - rest of STM32MP157A features
>
> i.
On Fri, Apr 9, 2021 at 12:28 PM Patrice CHOTARD
wrote:
> On 4/9/21 11:16 AM, Andy Shevchenko wrote:
> > On Fri, Apr 9, 2021 at 10:37 AM Patrice Chotard
> > wrote:
...
> >> + if (drv) {
> >> + if (drv == entry)
> >> +
Hi Dillon
On 4/9/21 9:28 AM, dillon.min...@gmail.com wrote:
> From: dillon min
>
> This patchset has following changes:
>
> - introduce stm32h750.dtsi to support stm32h750 value line
> - add pin groups for usart3/uart4/spi1/sdmmc2
> - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
> - a
Hi Dillon
On 4/9/21 9:28 AM, dillon.min...@gmail.com wrote:
> From: dillon min
>
> All these files are add for support rt-thread art-pi board
> - add board/st/stm32h750-art-pi, defconfig, header support for u-boot
>
> for more information about art-pi, please goto:
> https://art-pi.gitee.io/web
Hi Dillon
On 4/9/21 9:28 AM, dillon.min...@gmail.com wrote:
> From: dillon min
>
> strsep will change data from original memory address,
> in case the memory is in non-sdram/sram place, will
> run into a bug(hang at SDRAM: )
>
> just add a temporary array to store bank_name[] to fix this
> bug.
Hi Dillon
On 4/9/21 9:28 AM, dillon.min...@gmail.com wrote:
> From: dillon min
>
> Replace upper case by lower case in i2c nodes name.
> update dmamux1 register range.
>
> Signed-off-by: dillon min
> Reviewed-by: Patrice Chotard
> ---
> v5: no changes
>
> arch/arm/dts/stm32h743.dtsi | 6 +++
1 - 100 of 114 matches
Mail list logo