On Mon, Feb 4, 2019 at 5:39 PM Vladimir Oltean wrote:
>
> On 2/5/19 1:28 AM, Joe Hershberger wrote:
> > On Fri, Jan 25, 2019 at 7:12 AM Vladimir Oltean
> > wrote:
> >>
> >> On 25.01.2019 12:12, Carlo Caione wrote:
> >>> On 24/01/2019 20:48, V
On Mon, Jan 28, 2019 at 3:16 AM Shawn Guo wrote:
>
> It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon
> SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but
> quite a lot of code gets rewritten and cleaned up to adopt driver model
> and PHY API.
>
> Signed-
mply follow the read-modify-write procedure from the common
> function.
>
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Fri, Jan 25, 2019 at 6:43 PM Vladimir Oltean wrote:
>
> Also take the opportunity to use the phy_read_mmd and phy_write_mmd
> convenience functions.
>
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
U-Boot mail
On Fri, Jan 25, 2019 at 6:43 PM Vladimir Oltean wrote:
>
> To eliminate any doubts about the out-of-reset value of the PHY, that
> the driver previously relied on.
>
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
U-Boot
On Fri, Jan 25, 2019 at 6:42 PM Vladimir Oltean wrote:
>
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
know they rely on Tx delay implicitly.
>
> Signed-off-by: Vladimir Oltean
> ---
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Fri, Jan 25, 2019 at 7:12 AM Vladimir Oltean wrote:
>
> On 25.01.2019 12:12, Carlo Caione wrote:
> > On 24/01/2019 20:48, Vladimir Oltean wrote:
> >> On 1/24/19 10:19 PM, Carlo Caione wrote:
> >>> On 24/01/2019 20:12, Vladimir Oltean wrote:
>
> >>
> >> I can't completely answer that, TBH I
On Thu, Jan 24, 2019 at 6:35 PM Vladimir Oltean wrote:
>
> On 1/24/19 8:20 AM, Joe Hershberger wrote:
> > On Wed, Jan 23, 2019 at 5:47 PM Vladimir Oltean
> > wrote:
> >> static int ar8021_config(struct phy_device *phydev)
> >> {
> >> ph
On Thu, Jan 24, 2019 at 6:35 PM Vladimir Oltean wrote:
>
> On 1/24/19 8:16 AM, Joe Hershberger wrote:
> > On Wed, Jan 23, 2019 at 5:46 PM Vladimir Oltean
> > wrote:
> >>
> >> Signed-off-by: Vladimir Oltean
> >> ---
> >> Changes in v2:
>
On Thu, Jan 24, 2019 at 2:07 AM Michal Simek wrote:
>
> On 23. 01. 19 19:20, Joe Hershberger wrote:
> > On Tue, Nov 27, 2018 at 12:20 AM Siva Durga Prasad Paladugu
> > wrote:
> >>
> >> This patch adds support for gmiitorgmii converter.
> >> This co
Hi Chris,
https://patchwork.ozlabs.org/patch/1003048/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Chris,
https://patchwork.ozlabs.org/patch/1003050/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Carlo,
https://patchwork.ozlabs.org/patch/1025909/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Valentin-catalin,
https://patchwork.ozlabs.org/patch/990715/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Ramon,
https://patchwork.ozlabs.org/patch/1018949/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Andreas,
https://patchwork.ozlabs.org/patch/1005603/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
https://patchwork.ozlabs.org/patch/1001862/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Aditya,
https://patchwork.ozlabs.org/patch/1007736/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Valentin-catalin,
https://patchwork.ozlabs.org/patch/993651/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Baruch,
https://patchwork.ozlabs.org/patch/1001095/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
https://patchwork.ozlabs.org/patch/999267/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Tom,
Passed the travis build...
https://travis-ci.org/jhershbe/u-boot/builds/483483372
The following changes since commit aff66f22d6eeb27c6329c0a3c1ebc52914c8affa:
Merge tag 'mips-pull-2019-01-23' of git://git.denx.de/u-boot-mips (2019-01-23
17:24:31 -0500)
are available in the git repos
Hi Baruch,
https://patchwork.ozlabs.org/patch/1001096/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Chris,
https://patchwork.ozlabs.org/patch/1007466/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Pankaj,
https://patchwork.ozlabs.org/patch/998770/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
https://patchwork.ozlabs.org/patch/1001866/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Thomas,
https://patchwork.ozlabs.org/patch/1001188/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
https://patchwork.ozlabs.org/patch/999268/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Wed, Jan 23, 2019 at 5:46 PM Vladimir Oltean wrote:
>
> Signed-off-by: Vladimir Oltean
> ---
> Changes in v2:
> * Patch added in this version.
>
> drivers/net/phy/atheros.c | 8 +++-
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/phy/atheros.c b/drivers/ne
transmitted, 145 received, 35% packet loss, time 229334ms
> - With SmartEEE:
> 144 packets transmitted, 144 received, 0% packet loss, time 146378ms
>
> Signed-off-by: Vladimir Oltean
> Acked-by: Joe Hershberger
> ---
> Changes in v2:
> * Adapted to use phy_read
On Wed, Jan 23, 2019 at 5:47 PM Vladimir Oltean wrote:
>
> Signed-off-by: Vladimir Oltean
> ---
> Changes in v2:
> * Patch added in this version.
>
> drivers/net/phy/atheros.c | 76
> ---
> 1 file changed, 45 insertions(+), 31 deletions(-)
>
> diff -
On Tue, Nov 27, 2018 at 12:20 AM Siva Durga Prasad Paladugu
wrote:
>
> This patch moves fixed-link functionality code to a separate
> routine inorder to make it more modular and cleaner.
>
> Signed-off-by: Siva Durga Prasad Paladugu
> Signed-off-by: Michal Simek
Acked-b
On Tue, Nov 27, 2018 at 12:20 AM Siva Durga Prasad Paladugu
wrote:
>
> This patch adds support for gmiitorgmii converter.
> This converter sits between the MAC and the external phy
> MAC <==> GMII2RGMII <==> RGMII_PHY.
> The ethernet driver probes this bridge and this bridge driver
> probes real p
On Wed, Jan 23, 2019 at 10:39 AM Carlo Caione wrote:
>
> On 23/01/19 16:19, Joe Hershberger wrote:
>
> /cut
> >> + transitions to/from a lower power consumption level (Low
> >> Power Idle
> >> + mode) based on link utilization. When no packe
On Wed, Jan 23, 2019 at 10:58 AM Carlo Caione wrote:
>
> On 23/01/19 16:31, Joe Hershberger wrote:
> >On Wed, Jan 23, 2019 at 10:23 AM Joe Hershberger
> >wrote:
> >>
> >> On Wed, Jan 23, 2019 at 10:07 AM Carlo Caione wrote:
> >> >
> >>
On Wed, Jan 23, 2019 at 10:23 AM Joe Hershberger wrote:
>
> On Wed, Jan 23, 2019 at 10:07 AM Carlo Caione wrote:
> >
> > Two new parameters (rmmd and wmmd) are added to allow the `mdio` command
> > to access the content of the MMD PHY registers.
> >
> > Signe
On Wed, Jan 23, 2019 at 10:21 AM Joe Hershberger wrote:
>
> On Wed, Jan 23, 2019 at 10:07 AM Carlo Caione wrote:
> >
> > Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
> > to allow access to the MMD PHY registers.
> >
> > The MMD
On Wed, Jan 23, 2019 at 10:07 AM Carlo Caione wrote:
>
> Two new parameters (rmmd and wmmd) are added to allow the `mdio` command
> to access the content of the MMD PHY registers.
>
> Signed-off-by: Carlo Caione
Acked-by: Joe Hershberger
___
s to the MMD registers through
> the indirection registers (clause 22) in all the other cases.
>
> Signed-off-by: Carlo Caione
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
configuration symbol, the PHY state
> is not changed.
>
> Signed-off-by: Carlo Caione
Other than a few nits below,
Acked-by: Joe Hershberger
> ---
>
> Hi Joe,
> just an heads up that this patch depends on the MMD helpers patch I
> submitted earlier.
>
> ---
> dr
On Wed, Jan 23, 2019 at 8:32 AM Vladimir Oltean wrote:
>
> On 23.01.2019 11:59, Carlo Caione wrote:
> > On 23/01/19 00:04, Joe Hershberger wrote:
> >>
> >> If we have to override the access then probably so. Maybe it would
> >> make more sense to have a v2 f
On Wed, Jan 23, 2019 at 7:15 AM Carlo Caione wrote:
>
> Now that generic helpers are available, use those instead of relying on
> ti specific functions.
>
> Signed-off-by: Carlo Caione
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
On Wed, Jan 23, 2019 at 7:14 AM Carlo Caione wrote:
>
> Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
> to allow access to the MMD PHY registers.
>
> The MMD PHY registers can be accessed by two means:
>
> 1. Using two new MMD access function hooks in the PHY driver. Thes
On Wed, Jan 23, 2019 at 7:15 AM Carlo Caione wrote:
>
> Two new parameters (rmmd and wmmd) are added to allow the `mdio` command
> to access the content of the MMD PHY registers.
>
> Signed-off-by: Carlo Caione
> ---
> cmd/mdio.c | 33 +++--
> 1 file changed, 27 inser
On Tue, Jan 22, 2019 at 10:31 PM Anup Patel wrote:
>
> This patch does following fixes in MACB ethernet driver
> for using it on RISC-V systems (particularly QEMU sifive_u
> machine):
> 1. asm/arch/clk.h is not available on RISC-V port so include
>it only for non-RISC-V systems.
> 2. Don't fai
f-by: Atish Patra
> Signed-off-by: Anup Patel
> Reviewed-by: Alexander Graf
> Reviewed-by: Lukas Auer
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Tue, Jan 22, 2019 at 4:54 PM Carlo Caione wrote:
>
> On 22/01/19 22:21, Joe Hershberger wrote:
> >On Wed, Jan 16, 2019 at 12:06 PM Carlo Caione wrote:
> >>
> >> Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
> >> to allow access
guess this is because our changes are around the same
> lines. So one of us needs to rebase after applying the other.
>
> And since my patch fixes the buffer underrun issue for MCAST_TFTP,
> too, you're right that it should probably be pushed first.
It was fairly trivial to resolv
, unsigned char const *p)
> > >
> > > I haven't checked, but can't we use lib/crc32.c for this? The
> > > polynomial is the same...
> > >
> >
> > Yes more than likely. I erred on the side of not changing more than
> > absolutely necessary.
On Tue, Jan 22, 2019 at 5:14 PM Joe Hershberger
wrote:
>
> On Tue, Nov 6, 2018 at 6:17 AM Valentin-catalin Neacsu
> wrote:
> >
> > Print information about Aquantia firmware loaded on the phy.
> >
> > Signed-off-by: Valentin Catalin Neacsu
> > ---
> >
On Tue, Nov 6, 2018 at 6:17 AM Valentin-catalin Neacsu
wrote:
>
> Print information about Aquantia firmware loaded on the phy.
>
> Signed-off-by: Valentin Catalin Neacsu
> ---
> V2:
> - Fix typo in title. (Clement Peron)
>
> drivers/net/phy/aquantia.c | 21 +
> 1 file change
On Wed, Jan 16, 2019 at 12:06 PM Carlo Caione wrote:
>
> Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
> to allow access to the MMD PHY registers.
>
> The MMD PHY registers can be accessed by two means:
>
> 1. Using two new MMD access function hooks in the PHY driver. The
witch back to IEEE
>Standard Registers)
>
> Hook the missing functions so that we can use the `mdio rx/wx` command to
> easily access the extended registers.
>
> Signed-off-by: Carlo Caione
Acked-by: Joe Hershberger
___
U-Boot mai
transmitted, 145 received, 35% packet loss, time 229334ms
> - With SmartEEE:
> 144 packets transmitted, 144 received, 0% packet loss, time 146378ms
>
> Signed-off-by: Vladimir Oltean
Acked-by: Joe Hershberger
___
U-Boot mailing list
On Tue, Dec 18, 2018 at 7:22 PM Vladimir Oltean wrote:
>
> * These are convenience functions for accessing PHY MMD registers
> through clause 22 (indirectly through registers 0xD and 0xE),
> and are exported in the Linux phylib as well.
>
> Signed-off-by: Vladimir Olte
On Tue, Dec 4, 2018 at 12:55 AM Chris Packham wrote:
>
> Some existing device trees don't specify a phy-mode so fallback to GMII
> when a phy-mode is not provided.
>
> Signed-off-by: Chris Packham
Acked-by: Joe Hershberger
___
U
l discussion to port the changes into mvneta
> [https://patchwork.ozlabs.org/patch/1005765/]
>
> Signed-off-by: Aditya Prayoga
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Thu, Dec 27, 2018 at 11:59 AM Ramon Fried wrote:
>
> Some architectures (MIPS) needs mapping to access IOMEM.
> Fix that.
>
> Fixes: f1dcc19b213d ("net: macb: Convert to driver model")
>
> Signed-off-by: Ramon Fried
Acked-by: Joe Hershberger
__
driver unification.
>
> Effect (only for KSZ9031 clock skews): For values greater 900 (== 0ps),
> this silently results in 1860 (== +960ps) instead of the requested one.
>
> Fix the check by using the bit width instead of hardcoded value(s).
>
> Signed-o
gt; port struct mvpp2_port.
>
> Cc: Ken Ma
> Cc: Stefan Chulski
> Signed-off-by: Baruch Siach
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Tue, Oct 30, 2018 at 5:44 AM Valentin-catalin Neacsu
wrote:
>
> If System interface protocol is USXGMII then enable USXGMII autoneg
> Signed-off-by: Valentin Catalin Neacsu
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@list
On Tue, Nov 6, 2018 at 6:17 AM Valentin-catalin Neacsu
wrote:
>
> Print information about Aquantia firmware loaded on the phy.
>
> Signed-off-by: Valentin Catalin Neacsu
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.d
ess((void *)gd->fdt_blob,
> - cp_node);
>
> - port->priv->mdio_base = (void *)mdio_addr;
> + phy_ofnode = ofnode_get_parent(offset_to_ofnode(phy_node));
> + phy_base = ofn
/net/net.c
> +++ b/net/net.c
> @@ -657,6 +657,7 @@ restart:
> /* Invalidate the last protocol */
> eth_set_last_protocol(BOOTP);
> debug_cond(DEBUG_INT_STATE, "--- net_loop Fail!\n");
> +
On Tue, Jan 22, 2019 at 1:26 AM Simon Goldschmidt
wrote:
>
> Hi Joe,
>
> On Tue, Jan 15, 2019 at 10:00 AM Joe Hershberger
> wrote:
> >
> > On Thu, Nov 22, 2018 at 9:58 AM Simon Goldschmidt
> > wrote:
> > >
> > > ETHADDR_WILDCARD is defi
atch just calls
> regulator_set_enable() which shouldn't have such restrictions.
>
> Fixes: ad8c43cbcafb ("net: dm: fec: Support the phy-supply
> binding")
>
> Signed-off-by: Adam Ford
Acked-by: Joe Hershberger
___
U-Boot mailing
n Goldschmidt
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
s being absent for eth10addr and above.
>
> Fix this by changing ETHADDR_WILDCARD from "\\d?" to "\\d*" to allow
> more than one digit.
>
> Signed-off-by: Simon Goldschmidt
Acked-by: Joe Hershberger
___
U-Boot ma
Hi Simon,
On Mon, Jan 14, 2019 at 10:29 AM Tom Rini wrote:
>
> On Mon, Jan 14, 2019 at 04:42:10PM +0100, Simon Goldschmidt wrote:
> > Am 14.12.2018 um 14:28 schrieb Tom Rini:
> > >On Fri, Dec 14, 2018 at 09:56:19AM +0100, Simon Goldschmidt wrote:
> > >
> > >>+Tom
> > >>
> > >>On Sun, Dec 9, 2018
On Mon, Jan 7, 2019 at 5:47 PM Simon Glass wrote:
>
> At present this stores the error number in an unsigned int so an error is
> never detected. Use the existing signed variable instead.
>
> Signed-off-by: Simon Glass
Acked-by: Joe Hershberger
__
On Wed, Dec 19, 2018 at 1:04 PM Simon Goldschmidt
wrote:
>
> This fixes CVE-2018-18439 ("insufficient boundary checks in network
> image boot") by using lmb to check for a valid range to store
> received blocks.
>
> Signed-off-by: Simon Goldschmidt
ms to clause 22. otherwise it conforms to clause 45.
>
> Signed-off-by: Pankaj Bansal
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Fri, Nov 9, 2018 at 8:21 AM Neil Armstrong wrote:
>
> Add the compatible strings in the Synopsys DWMAC driver for :
> - The Amlogic GXBB (and other GX) SoC
> - The Amlogic AXG (and other GX) SoC
>
> Neil Armstrong (2):
> net: designware: add meson meson gxbb comptatible
> net: designware: a
ory contents to other hosts.
>
> Fix the padding code to zero out the padded bytes at the end.
>
> Tested on socfpga gen5.
>
> Signed-off-by: Simon Goldschmidt
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
Thanks for tackling this.
On Sat, Nov 17, 2018 at 6:31 AM Simon Goldschmidt
wrote:
>
> This option seems unused as no mainline board enables it and it does
> not compile since some years.
>
> Additionally, it has a potential buffer underrun issue (reported as
> a side node in CVE-2018-
e size mask before setting the new
> length.
>
> Tested on socfpga gen5.
>
> Signed-off-by: Simon Goldschmidt
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon,
On Wed, Nov 14, 2018 at 1:07 PM Simon Goldschmidt
wrote:
>
> On 14.11.2018 16:51, Simon Goldschmidt wrote:
> > On 14.11.2018 16:35, Daniele Bianco wrote:
> >> On Wed, Nov 14, 2018 at 04:26:17PM +0100, Andrea Barisani wrote:
> >>> On Wed, Nov 14, 2018 at 04:13:00PM +0100, Simon Goldschmid
On Mon, Nov 5, 2018 at 10:06 PM Tom Rini wrote:
>
> On Mon, Nov 05, 2018 at 11:51:41AM -0600, Joe Hershberger wrote:
>
> > Hi Tom,
> >
> > Built successfully on Travis:
> > https://travis-ci.org/jhershbe/u-boot/builds/450020193
> >
Hi Cédric,
https://patchwork.ozlabs.org/patch/990058/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990052/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990063/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991704/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990056/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990051/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990055/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990060/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990050/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990053/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991709/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991708/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990061/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990062/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990059/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991712/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991713/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991710/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Cédric,
https://patchwork.ozlabs.org/patch/990057/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Grygorii,
https://patchwork.ozlabs.org/patch/991707/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Quentin,
https://patchwork.ozlabs.org/patch/991334/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
601 - 700 of 4631 matches
Mail list logo