> This is what I am concerned about: this hang causes the board to brick
> and can no
> longer be recovered since it has the fuse programmed to close the device,
> right?
Once the board is closed you can only boot from signed images. If the
signed image is not working (hanging during
On Fri, Feb 9, 2024 at 11:25 AM Mathieu Othacehe wrote:
> Once the board is closed you can only boot from signed images. If the
> signed image is not working (hanging during relocation for instance),
> then you can always boot from a new one. All the interfaces: SD-card,
> UART, USB are still
Hello Fabio,
> Just wanted to make sure I understand: if someone programs the fuse to
> close the board,
> it will fail to boot U-Boot proper and this means that the board is
> bricked. Is this correct?
No. I fused the board and with this series applied and the three HAFDBS
commits reverted, I
Hi Mathieu,
On Fri, Feb 9, 2024 at 5:05 AM Mathieu Othacehe wrote:
> No. I fused the board and with this series applied and the three HAFDBS
> commits reverted, I can boot just fine on that board.
Yes, this part I understood.
> Without reverting those commits, the SPL is working fine and
Hi Mathieu,
On Thu, Feb 8, 2024 at 6:45 AM Mathieu Othacehe wrote:
>
> Hello,
>
> This enables AHAB support on the imx93_var_som.
> I was able to test that I can boot from signed images on a closed board.
>
> There is one issue that has been discovered and that is discussed here:
>
Hello,
This enables AHAB support on the imx93_var_som.
I was able to test that I can boot from signed images on a closed board.
There is one issue that has been discovered and that is discussed here:
https://lists.denx.de/pipermail/u-boot/2024-February/545404.html
This series can still be
6 matches
Mail list logo