Hi Feng,
Below is the screen dump after enabling Debug. ..
===
Booting RFL GARD 8000 Controller using u-boot based bootloader
===
U-Boot 1.3.0-rc4 (Jun 24 2010 - 16:47:32)
C
I dont know how the hardware is tied down. But at it seems to be getting
bank 0 correctly.
However, you second bank base address should be bank0_base + size instead of
0.
You may have a hardware problem.
Feng Kan
On Thu, Jun 24, 2010 at 2:14 PM, wrote:
>
> Hi Feng,
> Below is the screen dum
Hi Feng,
We do not have two banks. Our design has only one Bank but two chips
in the single Bank. Any idea how to get this working in u-boot..
Thanks
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : ravi@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
CONFIDENTIALITY NOTE
3 matches
Mail list logo