Thanks Paul and Chicks.
I have not soldered GPIO pins to the Zero2W but I am using Pimoroni's
hammer header pin and I suspect this could be the issue?!
For now I have connected a ZeroWh I had lying around. This seems to be
working fine for both the RasPiOS and pCP options. I am trying to get
an
paul- wrote:
> Are you using the correct config.txt settings for the board, as pi4's
> use different settings that pi0-3?
Hi,
Yes, these are two different installations (SD cards) and different
config.txt. I used Raspi OS for the P14B to verify the issue is not with
the screen. For the Pi Zero
paul- wrote:
> The touch is connected to GPIO, and the display device is there.
>
> Check the tweaks page on the pCP interface to make sure Jivelite is
> using fb0
>
> You might try adding to your config.txt
>
> dtoverlay=vc4-kms-v3d
>
> And comment out the gpu_mem line
Thanks Paul. Jivelit
paul- wrote:
> dmesg might be helpful.
>
> Is there a framebuffer device created?
Hi Paul,
Thanks.
I see fb0 is created:
tc@pCP:~$ ls -l /dev/fb*
crw-rw1 root staff 29, 0 Jan 1 1970 /dev/fb0
sh1nt
Hi
I am trying to get Jivelite working on Pi Zero 2w and a Hyperpixel
rectangular touchscreen. I followed the steps at
https://github.com/piCorePlayer/hyperpixel4 by ssh (no HDMI).
All I get is a glowing screen with no startup screen or jivelite display
perhaps similar to @thewebgal. I have als
Hi,
Does LMS monitor support SSD1351 128x128 OLED screens?
sh1ntomi's Profile: http://forums.slimdevices.com/member.php?userid=70545
View this thread: http://forums.slimdevices.com/showthread.php?t=111790
___
Cadster wrote:
> I use SBNetIO to switch my amplifier when my squeezebox is started. This
> plugin sends commands to a home automation server when the playback
> state changes. Perhaps this could work for you. I also the plugin
> kidsplay, to use one of the favorites buttons on my sqb radio to s
Thanks for all the good work with the material skin.
cpd73 wrote:
> With material skin you can define custom actions. These will appear as
> entries in the desired menu - e.g. for a player, in the main menu, for
> an artist etc. These actions can trigger LMS commands, shell commands,
> javascr
Hi,
I have LMS(V 8.1.1) and Squeezelite running on a raspberry pi(3b) with
'nanosound DAC2' (https://nanomesher.com/nanosounddac2/) .
I am looking for ways to trigger execution of a shell script from
squeezelite UI - commands through playlist or perhaps through a plugin.
Any pointers and exampl