Hi,
On Wed, May 25, 2022 at 8:21 AM tommy wrote:
> 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
> default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
>valid_lft forever preferred_lft forever
> inet6 ::1/128 scope
Hi Sandro.
Thank you so much for your reply
I followed the instructions and have successfully updated nodes now, update
worked fine !
I just didn't want to needlessly change repos as i've managed to break node
updates previously when I added a yum repo and wanted confirmation before
The error says that you can’t use IPoIB. And you’re using it. IP address on
Infiniband is IPoIB.
I don’t know the reasoning behind this, but as my experience with IB, IPoIB is
a resource hog when you have NFS on top of it. There’s no offload on the
hardware. A 1GbE ethernet card will perform
Il giorno gio 26 mag 2022 alle ore 17:11 morgan cox
ha scritto:
> Thank you for the response Sandro.
>
> I have seen that info, what I was unsure of was if I should do this on a
> Ovirt node from pre-built iso ? (based on centos8-steam) as the
> instructions appear to suggest this is for hosts
Thank you for the response Sandro.
I have seen that info, what I was unsure of was if I should do this on a Ovirt
node from pre-built iso ? (based on centos8-steam) as the instructions appear
to suggest this is for hosts based on Rhel8 ?
___
Users
Il giorno gio 26 mag 2022 alle ore 12:52 morgan cox
ha scritto:
> Hi.
>
> hi - wondering if anyone can advise me, how to update Ovirt nodes
> (installed from pre-built image iso (i.e
> https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.10-2022030308/el8/
> ) from 4.4.10
Hi,
engine=# update vm_dynamic set status = 1 where
vm_guid='7871067f-221c-48ed-a046-f49499ce9be4';
UPDATE 1
Seems like success, but it is not.
After few seconds:
engine=# select status from vm_dynamic where
vm_guid='7871067f-221c-48ed-a046-f49499ce9be4';
status
10
(1 row)
Sorry, duplicate post
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
Hi all,
i am trying to use a mellanox 100g infiniband interface (EoIB) for VM usage.
Acuallu, trying to configure hosts to user it, i have an error and in vsdm.log
i see:
The bridge ovirtib cannot use IP over InfiniBand interface ib0 as port. Please
use RoCE interface instead.
ib0 is
Hi all,
i am facing a problem while trying to associate a Mellanox infiniband interface
to a network and using it for VM traffic.
vdsm log shows the following message:
The bridge cannot use IP over InfiniBand interface as port. Please use RoCE interface instead.
Did anybody face the same
Hi Maria, My system experiencing a similar issue as you have captured. Can you
tell me where I can find the HostedEngine.xml to confirm the virtio disk
associated with my hosted engine error?
___
Users mailing list -- users@ovirt.org
To unsubscribe
Hello,
On Sat, May 21, 2022 at 9:01 AM mert tuncsav
wrote:
>
>
> Hello All,
>
> We have performance issues about i/o for some system on oVirt. Disk type
is a nfs for shared datacenter. We need to use local disk as a secondary
data-domain to deploy vm in shared datacenter. Is there a any chance
On Wed, May 25, 2022 at 5:52 PM Andrei Verovski
wrote:
> Hi,
>
> I have VM which have restarted successfully yet in oVirt web it is being
> shown with “Rebooting” status for a very long time.
>
> I did:
>
> su - postgres
> psql engine
> select vm_guid from vm_static where
Hello all,
I'm facing a strange error. I was able to add a host to a linux bridge based
cluster. However if I try adding the host to a cluster with OVS switch it is
failing. I can see that nmstate was able to create the ovirtmgmt bridge as
well. At that point of time both the ovirtmgmt and the
Hi.
hi - wondering if anyone can advise me, how to update Ovirt nodes (installed
from pre-built image iso (i.e
https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.10-2022030308/el8/
) from 4.4.10 -> 4.5 ?
I have a rhel8.6 server as the engine (standalone) - when i
Hello,
I'm currently still on 4.4.x.
Suppose I have an engine certificate expiring on mid August and I want to
force renew it now using "engine-setup --offline" command.
How can I do it if possible?
How many days before expiration I get the message that it is expiring soon
with a proposal of
Il giorno mer 25 mag 2022 alle ore 20:38 Paul-Erik Törrönen <
pol...@poltsi.fi> ha scritto:
> Hello,
>
> I have oVirt 4.4 (latest that can be installed on RockyLinux 8.5)
> running on a laptop with a self-hosted engine.
>
Any reason for not moving to oVirt 4.5 and RockyLinux 8.6?
--
Sandro
This work around does work for me, for what its worth.
Sent with Proton Mail secure email.
--- Original Message ---
On Tuesday, April 26th, 2022 at 8:09 AM, Sandro Bonazzola
wrote:
>
>
> Il giorno lun 25 apr 2022 alle ore 13:42 Alessandro De Salvo
> ha scritto:
>
> > Hi,
> >
18 matches
Mail list logo