Hello all,
some disks lost contact with solaris 10 system but the disks came back
online on their own. I used vxreattach disk to attach them to dg and
started raid 5 volume.
Voulme's kstate is Enabled however state is DETACH. It bothers me a lot.
In this state also I can mount the volume and
vxrecover -s
-Original Message-
From: veritas-vx-boun...@mailman.eng.auburn.edu
[mailto:veritas-vx-boun...@mailman.eng.auburn.edu] On Behalf Of upen
Sent: Wednesday, January 12, 2011 5:10 PM
To: veritas-vx@mailman.eng.auburn.edu
Subject: [Veritas-vx] (no subject)
Hello all,
some disks
Hi Dana
On 1/12/11, Hudes, Dana hud...@hra.nyc.gov wrote:
vxrecover -s
Thanks for feedback. Unfortunately, no change after running that command.
bash-3.00# vxrecover -s
-bash-3.00# vxtask list
TASKID PTID TYPE/STATEPCT PROGRESS
vxprint -htg myapp-dg | grep myapp-vxvol
v myapp-vxvol
I have the following in my notes about recovery of RAID5
/etc/vx/bin/vxr5check -g dg -iv volume
On Wed, Jan 12, 2011 at 5:48 PM, upen upendra.gan...@gmail.com wrote:
Hi Dana
On 1/12/11, Hudes, Dana hud...@hra.nyc.gov wrote:
vxrecover -s
Thanks for feedback. Unfortunately, no change after
Open a ticket with Symantec :)?
Try vxvol start myapp-vxvol
Also, FYI,
http://docsrv.sco.com/cgi-bin/man/man?vxvol+1M
Andrey Dmitriev
Mentora Group
-Original Message-
From: veritas-vx-boun...@mailman.eng.auburn.edu
[mailto:veritas-vx-boun...@mailman.eng.auburn.edu] On Behalf Of upen
I have the following in my notes about recovery of RAID5
/etc/vx/bin/vxr5check -g dg -iv volume
/etc/vx/bin/vxr5check -g myapp-dg myapp-vxvol
VxVM vxr5check INFO V-5-2-1451 verification in process... passed
Thanks William but the o/p is still DETACH for Volume
On 1/12/11, Andrey Dmitriev admitr...@mentora.com wrote:
Open a ticket with Symantec :)?
I don't have support contract with Symantec.
Try vxvol start myapp-vxvol
That's already done, that's why KSTATE is ENABLED and I can mount the
volume as well with RW access.
Also, FYI,
The man page for vxvol has an entry for maint. vxvol -g dg maint vol
will detach the volume. Try the command to see if it will attach the
volume.
On Wed, Jan 12, 2011 at 7:03 PM, upen upendra.gan...@gmail.com wrote:
I have the following in my notes about recovery of RAID5