Re: Enterprise Solution.

[Angela Hughes]

Yury US,
Yes, I've done it for IBM internally and externally
and it can be done w/TSM.
Thanks,
Angela
--- Yury Us <[EMAIL PROTECTED]> wrote:
> Hi everybody,
> Currently we use ADSM for back up only, but there
> are some other components,
> so I am trying to get information about those
> components too and need a good
> advice.
>
> SUTUATION: We have few overseas locations in
> different countries, where
> development is taking place.
>
> So this is a very important task monitoring the
> software installed on all
> PC, servicepacks installed on every single PC, to
> make the possible
> transition from overseas computers here in
> headquarters.
>
> Another important task is deployment and
> installation the software to the
> clients. Sometimes it is a hundred PC on client
> site.
>
> Third task is to produce the servisepacks and deploy
> them to client.
>
> Next very important task is keeping track about what
> the client has.
>
> QUESTION: Does anybody has experience with Tivoli
> that covers the listed
> above issues?
> Documentation claims that all that software exists
> already. If there are
> people who think that using that software is a smart
> choice I would
> appreciate the answer.
>
> Yuriy Us.


__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Re: Has anybody seen this error??

[Angela Hughes]

Does the P Drive exist anymore?  I've seen this happen
when a drive was once there but no longer exists and
is part of the include stmts in the dsm.opt file.
Thanks,
Angela
--- "Amini, Mehdi" <[EMAIL PROTECTED]>
wrote:
> When upgrading Terminal Server TSM from 3.7.1.0 to
> 4.1, I got this error
>
> Error 1327, invalid Drive: P:\
>
> Please help
>
> Thanks
>
> Mehdi Amini
> LAN/WAN Engineer
> ValueOptions
> 3110 Fairview Park Drive
> Falls Church, VA 22042
> Phone: 703-208-8754
> Fax: 703-205-6879
>
>
>
>
>
**
> This email and any files transmitted with it are
> confidential and
> intended solely for the use of the individual or
> entity to whom they
> are addressed. If you have received this email in
> error please notify
> the sender by email, delete and destroy this message
> and its
> attachments.
>
>
>
**


__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Netapps for ADSM Server?

[Thomas A. La Porte]

Just out of curiosity, has anybody experimented with using a
Network Appliance, or other similar network attached storage
devices, for their ADSM database or logs?

We are using Network Appliance Filers very successfully on our
Oracle servers, so I was curious about the possibility of using
them on our ADSM servers. Just wondering if anybody else has gone
down this path before me, or have even thought about it.

 -- Tom

Thomas A. La Porte
DreamWorks SKG
[EMAIL PROTECTED]

Re: Offsite volume in strange state

[PINNI, BALANAND (SBCSI)]

use delete vol xxx discard=yes force=yes

-Original Message-
From: bbullock [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 3:56 PM
To: [EMAIL PROTECTED]
Subject: Re: Offsite volume in strange state


Hmm, we have about a dozen tapes in this state that are empty but not empty.
We have even brought the tapes back on site and tried the 'audit vol...
fix=yes' command on them and they still are not getting cleared up. We have
opened a call with Tivoli but they have yet to be able to fix it. We are on
AIX 4.3.3 at TSM version 4.1.1, so I'm not sure if our problems are related,
but if they find a fix for us, I'll let you know what it is.

Ben Bullock
Unix system manager
Micron Technology Inc.


> -Original Message-
> From: Thomas Denier [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 13, 2001 2:37 PM
> To: [EMAIL PROTECTED]
> Subject: Offsite volume in strange state
>
>
> Our TSM server log for yesterday afternoon shows many pairs of
> messages like the following:
>
> 14:00:21 ANRD AFMIGR(2967): Space reclamation terminated
> for volume
>  600206 - unexpected result code (1).
> 14:00:21 ANR1092W Space reclamation terminated for volume 600206 -
>  internal server error detected.
>
> The output from 'q v 600206 f=d' is as follows:
>
>Volume Name: 600206
>  Storage Pool Name: VSN_MAIL
>  Device Class Name: VAULT3590
>Estimated Capacity (MB): 9,216.0
>   Pct Util: 0.0
>  Volume Status: Filling
> Access: Offsite
> Pct. Reclaimable Space: 100.0
>Scratch Volume?: Yes
>In Error State?: No
>   Number of Writable Sides: 1
>Number of Times Mounted: 4
>  Write Pass Number: 1
>  Approx. Date Last Written: 07/11/2001 09:19:39
> Approx. Date Last Read: 07/10/2001 17:43:16
>Date Became Pending:
> Number of Write Errors: 0
>  Number of Read Errors: 0
>Volume Location: VAULT
> Last Update by (administrator): BATSYS
>  Last Update Date/Time: 07/11/2001 10:13:48
>
> A 'query content 600206' command reports 'No match found using
> this criteria.' Our server runs under OS/390 and is at level
> 3.7.4.0. The 'delete volume' command fails with a return code
> of 13 with or without the 'discard=yes' option. The volume is
> in fact off-site, which makes 'audit volume' a significant
> undertaking. Is there any way to get rid of a volume like this?
>

Re: Offsite volume in strange state

[Prather, Wanda]

Bring the volume back (it's empty, anyway).  Check it in, run AUDIT VOL
FIX=YES.
That usually fixes this problem.


-Original Message-
From: Thomas Denier [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 4:37 PM
To: [EMAIL PROTECTED]
Subject: Offsite volume in strange state


Our TSM server log for yesterday afternoon shows many pairs of
messages like the following:

14:00:21 ANRD AFMIGR(2967): Space reclamation terminated for volume
 600206 - unexpected result code (1).
14:00:21 ANR1092W Space reclamation terminated for volume 600206 -
 internal server error detected.

The output from 'q v 600206 f=d' is as follows:

   Volume Name: 600206
 Storage Pool Name: VSN_MAIL
 Device Class Name: VAULT3590
   Estimated Capacity (MB): 9,216.0
  Pct Util: 0.0
 Volume Status: Filling
Access: Offsite
Pct. Reclaimable Space: 100.0
   Scratch Volume?: Yes
   In Error State?: No
  Number of Writable Sides: 1
   Number of Times Mounted: 4
 Write Pass Number: 1
 Approx. Date Last Written: 07/11/2001 09:19:39
Approx. Date Last Read: 07/10/2001 17:43:16
   Date Became Pending:
Number of Write Errors: 0
 Number of Read Errors: 0
   Volume Location: VAULT
Last Update by (administrator): BATSYS
 Last Update Date/Time: 07/11/2001 10:13:48

A 'query content 600206' command reports 'No match found using
this criteria.' Our server runs under OS/390 and is at level
3.7.4.0. The 'delete volume' command fails with a return code
of 13 with or without the 'discard=yes' option. The volume is
in fact off-site, which makes 'audit volume' a significant
undertaking. Is there any way to get rid of a volume like this?

Re: TSM server performance help

[Jolley, Bill]

We have a SUN system tsm 3.7.4, tdp for oracle 3.1 using RMAN, gige
connections and a test db of 30GB.

It takes 1.5 hours to backup the test db.  Do anyone have any
knowledge/experience with tuning
parameters or any suggestion as to what to look for as a bottleneck?

-Original Message-
From: bbullock [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 10:28 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM server performance help


I've seen all the replies and they are all good, but I don't think
they will solve your problem. I think the most telling problem is that when
you run backups individually, they work great, but when you have multiple
sessions and processes running at the same time, they all seem to bog down.
We are running 2 of our TSM servers on M80s and they just scream.

It sounds like what bit us when we upgraded to AIX 4.3.3. Because of
the way TSM threads it's jobs, if you don't have a certain setting in AIX,
your TSM server will become a single threaded beast and really bog down.
>From the TSM 4.1.1 readme:

___
**
* Possible performance degradation due to threading  *
**

On some systems Tivoli Storage Manager for AIX may exhibit significant
performance degradation due to TSM using user threads instead of
kernel threads.

This may be an AIX problem however, to avoid the performance degradation
you should set the following environment variables before you start
the server.

export AIXTHREAD_MNRATIO=1:1
export AIXTHREAD_SCOPE=S
___


Making these changes don't require a reboot, so it's worth a shot to
add these in, make sure they get sourced into your current environment (by
logging out & back in, or just running these 2 lines) and then stop and
start the ADSM service.


Ben Bullock
Unix system manager
Micron Technology Inc.


> -Original Message-
> From: Chuck Lam [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, July 10, 2001 5:47 PM
> To: [EMAIL PROTECTED]
> Subject: TSM server performance help
>
>
> Server:  M80 running AIX 4.3.3, 4GB RAM, 768MB ps
>  DiskStoragePool, Rlog, & Database on all on a
>   SAN via fibre channel connection.
> TSM version:4.1
>
> This is a newly configured system.  We are conducting
> tests on it. When we tried to do a few backups by
> themselves, they seemed to get done pretty fast.
> However, when we had 4 migration processes and a
> couple of backups going at the same time, everything
> slowed down to a halt.  According to my client, his
> backup transfer speed was about 100MB per minute. Can
> anyone give me some suggestions to improve the
> performance?  I have attached the 'topas' reading of
> this server.
>
> TIA
>
>
> __
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
>

Re: Offsite volume in strange state

[bbullock]

Hmm, we have about a dozen tapes in this state that are empty but not empty.
We have even brought the tapes back on site and tried the 'audit vol...
fix=yes' command on them and they still are not getting cleared up. We have
opened a call with Tivoli but they have yet to be able to fix it. We are on
AIX 4.3.3 at TSM version 4.1.1, so I'm not sure if our problems are related,
but if they find a fix for us, I'll let you know what it is.

Ben Bullock
Unix system manager
Micron Technology Inc.


> -Original Message-
> From: Thomas Denier [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 13, 2001 2:37 PM
> To: [EMAIL PROTECTED]
> Subject: Offsite volume in strange state
>
>
> Our TSM server log for yesterday afternoon shows many pairs of
> messages like the following:
>
> 14:00:21 ANRD AFMIGR(2967): Space reclamation terminated
> for volume
>  600206 - unexpected result code (1).
> 14:00:21 ANR1092W Space reclamation terminated for volume 600206 -
>  internal server error detected.
>
> The output from 'q v 600206 f=d' is as follows:
>
>Volume Name: 600206
>  Storage Pool Name: VSN_MAIL
>  Device Class Name: VAULT3590
>Estimated Capacity (MB): 9,216.0
>   Pct Util: 0.0
>  Volume Status: Filling
> Access: Offsite
> Pct. Reclaimable Space: 100.0
>Scratch Volume?: Yes
>In Error State?: No
>   Number of Writable Sides: 1
>Number of Times Mounted: 4
>  Write Pass Number: 1
>  Approx. Date Last Written: 07/11/2001 09:19:39
> Approx. Date Last Read: 07/10/2001 17:43:16
>Date Became Pending:
> Number of Write Errors: 0
>  Number of Read Errors: 0
>Volume Location: VAULT
> Last Update by (administrator): BATSYS
>  Last Update Date/Time: 07/11/2001 10:13:48
>
> A 'query content 600206' command reports 'No match found using
> this criteria.' Our server runs under OS/390 and is at level
> 3.7.4.0. The 'delete volume' command fails with a return code
> of 13 with or without the 'discard=yes' option. The volume is
> in fact off-site, which makes 'audit volume' a significant
> undertaking. Is there any way to get rid of a volume like this?
>

Re: bare metal restore

[John Freeman]

Hi Joseph

I have used TDP for Workgroups and it worked well but I understand that it
has been superseded by The Kernel Group software.

Regards
John

- Original Message -
From: "Joseph Dawes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 2:21 PM
Subject: bare metal restore


> Has anyone used Bare metal restore? and if yes does it work well??
>
>
>
>
> J

Offsite volume in strange state

[Thomas Denier]

Our TSM server log for yesterday afternoon shows many pairs of
messages like the following:

14:00:21 ANRD AFMIGR(2967): Space reclamation terminated for volume
 600206 - unexpected result code (1).
14:00:21 ANR1092W Space reclamation terminated for volume 600206 -
 internal server error detected.

The output from 'q v 600206 f=d' is as follows:

   Volume Name: 600206
 Storage Pool Name: VSN_MAIL
 Device Class Name: VAULT3590
   Estimated Capacity (MB): 9,216.0
  Pct Util: 0.0
 Volume Status: Filling
Access: Offsite
Pct. Reclaimable Space: 100.0
   Scratch Volume?: Yes
   In Error State?: No
  Number of Writable Sides: 1
   Number of Times Mounted: 4
 Write Pass Number: 1
 Approx. Date Last Written: 07/11/2001 09:19:39
Approx. Date Last Read: 07/10/2001 17:43:16
   Date Became Pending:
Number of Write Errors: 0
 Number of Read Errors: 0
   Volume Location: VAULT
Last Update by (administrator): BATSYS
 Last Update Date/Time: 07/11/2001 10:13:48

A 'query content 600206' command reports 'No match found using
this criteria.' Our server runs under OS/390 and is at level
3.7.4.0. The 'delete volume' command fails with a return code
of 13 with or without the 'discard=yes' option. The volume is
in fact off-site, which makes 'audit volume' a significant
undertaking. Is there any way to get rid of a volume like this?

Enterprise Solution.

[Yury Us]

Hi everybody,
Currently we use ADSM for back up only, but there are some other components,
so I am trying to get information about those components too and need a good
advice.

SUTUATION: We have few overseas locations in different countries, where
development is taking place.

So this is a very important task monitoring the software installed on all
PC, servicepacks installed on every single PC, to make the possible
transition from overseas computers here in headquarters.

Another important task is deployment and installation the software to the
clients. Sometimes it is a hundred PC on client site.

Third task is to produce the servisepacks and deploy them to client.

Next very important task is keeping track about what the client has.

QUESTION: Does anybody has experience with Tivoli that covers the listed
above issues?
Documentation claims that all that software exists already. If there are
people who think that using that software is a smart choice I would
appreciate the answer.

Yuriy Us.

Re: How to make to inclexcl list to fit my needs???

[Martin, Jon R.]

David,

I found it a little easier to do setting up a schedule through the
web interface.  I didn't use command line on the client side because I do
not have root access to the server that was having this problem.  From the
command line you can issue.

dsmc i /dir/subdir/*

This should back up the specified directory, it's subdirectories and
files with disregard to the include exclude list.

I can see how my first post was misleading.  I hope this works for
you

Jon



-Original Message-
From: David Ruiz [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 1:31 PM
To: [EMAIL PROTECTED]
Subject: Re: How to make to inclexcl list to fit my needs???


Hi Jon,
Thanks a lot or answering, I searched all aver my TSM
documentation and I am not able yet to put a "include"
option for the backup command (dsmc incremental) could
you please tell me how you did it?

Thanks again.

David.

--- "Martin, Jon R." <[EMAIL PROTECTED]> wrote:
> David,
>
> I experienced a similar situation.  I
> excluded the object in
> general.  For the occasions when I wanted to back
> that object up I used
> include as an option to my backup command and
> specified the area in
> question.
>
> Thanks,
>
> Jon Martin
>
> -Original Message-
> From: David Ruiz [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, July 12, 2001 8:24 PM
> To: [EMAIL PROTECTED]
> Subject: How to make to inclexcl list to fit my
> needs???
>
>
> Hi all TSMers,
>
> I am trying to build an include/exclude list for a
> HPUX box. I want to backup something sometimes and
> not
> to backup this same thing others, the problem is
> that
> if I put it on an exclude statement, I will never be
> able to backup it unless I include it again. I have
> this:
>
> /opt/tivoli
> /opt/OMImag
> /opt/netscape
> /opt/MC1
> /opt/MC2
> .
> .
> /opt/MC6
> /opt/data
> /opt/development
> .
> .
> .
> /opt/lotsofdirs
>
> I want to backup the whole /opt filesystem but the
> MC1
> and MC2...MC6 in the night and to backup only this
> MC*
> at in the day.
>
> I have already tryied to use two incl/excl lists but
> when I use the second one and some file that was
> included is now excluded it is automaticly deleted
> by
> an expiration process.
>
> I tryied to do the backup with a dsmc command but it
> becomes an never-ending line (too long).
>
> Hope you can give some advice.
>
> David.
>
>
>
>
> __
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/


__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Re: missing volumes

[Kai Hintze]

Hi Steve,

Yes, the tape is scratchable, but you have to explicitly "update libvol
3575lib1 11824f status=scratch". You might want to "q content 11824f" first
just to make sure there isn't anything on the tape. As you surmised, the
library gets confused sometimes and when it can't find the tape it was
looking for it marks the tape private so that TSM doesn't look for it any
more.

- Kai.

>Date:Fri, 13 Jul 2001 09:46:05 +0800
>From:Steve de Souza <[EMAIL PROTECTED]>
>Subject: missing volumes
>
>Hi All,
>
>I have some volumes which appears in a "q libv" as
>follows...(ythis is just one of them)
>
>
>3575LIB1  11824F Private59
>
>
>The usual forth field of "Data" is not displayed. Does this mean that this
>is a "scratchable" tape???
>
>Also, from the actlog, the last entry for this tape is an atempted checkin,
>which has failed as ADSM says that the tape is already in the library.
>The next most recent entry for the tape is a "checkout" from the library,
>which has failed, because the tape it got was the wrong one(I think the
>inventory is stuffed.)
>
>As I am physically holding this tape in my hand, I am very confused
>as to what is going on.
>Several tapes are like this. It also seems that after doing a
>"tapeutil -f /dev/smc0 inventory"
>that some of the tapes that are displayed are not the ones that
>physically appear in the slot
>that it says.
>
>Quite strange. Has anyone got some clues on how to sanity check and
>fix this inventory issue please?
>
>cheers
>steve

Re: How to make to inclexcl list to fit my needs???

[David Ruiz]

Hi Jon,
Thanks a lot or answering, I searched all aver my TSM
documentation and I am not able yet to put a "include"
option for the backup command (dsmc incremental) could
you please tell me how you did it?

Thanks again.

David.

--- "Martin, Jon R." <[EMAIL PROTECTED]> wrote:
> David,
>
> I experienced a similar situation.  I
> excluded the object in
> general.  For the occasions when I wanted to back
> that object up I used
> include as an option to my backup command and
> specified the area in
> question.
>
> Thanks,
>
> Jon Martin
>
> -Original Message-
> From: David Ruiz [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, July 12, 2001 8:24 PM
> To: [EMAIL PROTECTED]
> Subject: How to make to inclexcl list to fit my
> needs???
>
>
> Hi all TSMers,
>
> I am trying to build an include/exclude list for a
> HPUX box. I want to backup something sometimes and
> not
> to backup this same thing others, the problem is
> that
> if I put it on an exclude statement, I will never be
> able to backup it unless I include it again. I have
> this:
>
> /opt/tivoli
> /opt/OMImag
> /opt/netscape
> /opt/MC1
> /opt/MC2
> .
> .
> /opt/MC6
> /opt/data
> /opt/development
> .
> .
> .
> /opt/lotsofdirs
>
> I want to backup the whole /opt filesystem but the
> MC1
> and MC2...MC6 in the night and to backup only this
> MC*
> at in the day.
>
> I have already tryied to use two incl/excl lists but
> when I use the second one and some file that was
> included is now excluded it is automaticly deleted
> by
> an expiration process.
>
> I tryied to do the backup with a dsmc command but it
> becomes an never-ending line (too long).
>
> Hope you can give some advice.
>
> David.
>
>
>
>
> __
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/


__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Re: List Archives by description

[Richard Sims]

>I tried 'dsmc q archive "/*" -desc="my description'  got nothing found

Welcome to the ranks of the frustrated, Jim.  The B/A client manual
doesn't describe the real techniques that need to be employed to make
some of the client commands yield expected results.
What we'd like to do is say "look for all my archive files, beginning
at the root of the mounted file systems".  But it doesn't want to comply.
What you have to do is restrict the search to a file system.
For example, if your file activity is in /home, you can do:
  dsmc q archive /home/ -subdir=yes -desc="whatever"
That should turn up all your files in that area.
Note the foolishness of these client commands: unless you code a
slash (/) or slash-asterisk (/*) at the end of the directory name,
the commands assume that you are looking for an individual *file*
of that name, and turns up nothing.  Aye, carumba!

   Richard Sims, BU

Re: List Archives by description

[Matthew Large]

4.2 has a function called 'convert archive'. this is to replace the need to
access the server from the GUI atleast once before you could query on desc
(previously the only way to query with desc)

check in the manual.. if that doesn't work..

urm..

-Original Message-
From: Jim Taylor [mailto:[EMAIL PROTECTED]]
Sent: 13 July 2001 16:40
To: [EMAIL PROTECTED]
Subject: List Archives by description


Does anyone know how I can get, from a client, alist of archived files that
match description?

I tried 'dsmc q archive "/*" -desc="my description'  got nothing found

I can do a 'dsmc q archive "{filespec}"'  and it provides the description
for the matching files in the results.  I therefore expect that there should
be a way to ask for a list of archived files that have a common description.

ThanX in Advance,

> Jim Taylor
> Enlogix
> *  E-mail: [EMAIL PROTECTED]
> *  Office: (416) 496-5264 ext. 286
> * Cell:  (416)458-6802
> *   Fax: (416) 496-5245
>
>


http://www.phoenixitgroup.com
**Internet Email Confidentiality Footer***

Phoenix IT Group Limited is registered in England and Wales under company
number 3476115.  Registered Office: Technology House, Hunsbury Hill Avenue,
Northampton, NN4 8QS

Opinions, conclusions and other information in this message that do not
relate to the official business of our firm shall be understood as neither
given nor endorsed by it.

No contracts may be concluded on behalf of our firm by means of email
communications.

Confidentiality: Confidential information may be contained in this message.
If you are not the recipient indicated (or responsible for delivery of the
message to such person), you may not take any action based on it, nor should
you copy or show this to anyone; please reply to this email and highlight
the error to the sender, then delete the message from your system.

Monitoring of Messages: Please note that we reserve the right to monitor and
intercept emails sent and received on our network.
Warning:  Internet email is not 100% secure. We ask you to understand and
observe this lack of security when emailing us. We do not accept
responsibility for changes made to this message after it was sent

Viruses: Although we have taken steps to ensure that this email and any
attachments are free from any virus, we advise that in keeping with good
computing practice the recipient should ensure they are actually virus free.

List Archives by description

[Jim Taylor]

Does anyone know how I can get, from a client, alist of archived files that
match description?

I tried 'dsmc q archive "/*" -desc="my description'  got nothing found

I can do a 'dsmc q archive "{filespec}"'  and it provides the description
for the matching files in the results.  I therefore expect that there should
be a way to ask for a list of archived files that have a common description.

ThanX in Advance,

> Jim Taylor
> Enlogix
> *  E-mail: [EMAIL PROTECTED]
> *  Office: (416) 496-5264 ext. 286
> * Cell:  (416)458-6802
> *   Fax: (416) 496-5245
>
>

Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)

[PINNI, BALANAND (SBCSI)]

could u PL give how are u installing it PL?
need not give ant imp. info. just syntax.
do u use GUI on server to configure clients if no PL do its easy.
balanand

-Original Message-
From: Angelica Tulipano [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 9:53 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)


Raminder, i just receive that message, i dont know the name of the verb,
the client is a nt server v4.0.
The message explanation said that is a problem with the API of the client,
i reinstall it but nothing change, the same error still appears.

Ing. Angélica Tulipano
GBM de Panamá, S.A.
Phone (507) 263-9977 ext 202
Fax (507) 269-3604
e-mail: [EMAIL PROTECTED]


 

raminder.braich

@DAVEY.COM To: [EMAIL PROTECTED]

Sent by:   cc:

[EMAIL PROTECTED]Subject: Re: TSM 3.7 CLIENT
problem ANR0444W  
T.EDU  (out of sequence verb)

 

 

07/11/01 12:49

PM

Please respond

to ADSM-L

 

 





What is the verb name? Also what is the size of the tsm client?
> -Original Message-
> From: Angelica Tulipano [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, July 11, 2001 1:08 PM
> To:   [EMAIL PROTECTED]
> Subject:  Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)
>
> I'm having this problem in a tsm client, someone of you know what can it
> be?
>
> ANR0444W Protocol error on session session number for node client node
> name (client platform) - out-of-sequence verb (type verb
> name)
> received.
>
> Thanks
>
>  Angélica Tulipano
> Phone (507) 263-9977 ext 202
> Fax (507) 269-3604
> e-mail: [EMAIL PROTECTED]
>

Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)

[Palmadesso Jack]

I've found very rarely that the passwords between the client and server get
out of sync.  You may want to try resetting the password on the TSM server
and  then resetting the password on the client.

Jack Palmadesso

-Original Message-
From: Angelica Tulipano [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 10:54 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)


I created the service again with the password, change also the password of
the client, reinstall it and the problem continues... thanks for your help.

Ing. Angélica Tulipano
GBM de Panamá, S.A.
Phone (507) 263-9977 ext 202
Fax (507) 269-3604
e-mail: [EMAIL PROTECTED]


 

dthorneycroft

@LACSD.ORG   To: [EMAIL PROTECTED]

Sent by: cc:

[EMAIL PROTECTED]Subject: Re: TSM 3.7 CLIENT
problem ANR0444W  
IST.EDU  (out of sequence verb)

 

 

07/11/01

01:16 PM

Please

respond to

ADSM-L

 

 





Check your password.
I've seen similar errors when starting the scheduler service with
the wrong password.

On Wednesday, July 11, 2001 10:08 AM, Angelica Tulipano
[SMTP:[EMAIL PROTECTED]]
wrote:
> I'm having this problem in a tsm client, someone of you know what can it
> be?
>
> ANR0444W Protocol error on session session number for node client node
> name (client platform) - out-of-sequence verb (type verb
> name)
> received.
>
> Thanks
>
>  Angelica Tulipano
> Phone (507) 263-9977 ext 202
> Fax (507) 269-3604
> e-mail: [EMAIL PROTECTED]
>

Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)

[Angelica Tulipano]

Raminder, i just receive that message, i dont know the name of the verb,
the client is a nt server v4.0.
The message explanation said that is a problem with the API of the client,
i reinstall it but nothing change, the same error still appears.

Ing. Angélica Tulipano
GBM de Panamá, S.A.
Phone (507) 263-9977 ext 202
Fax (507) 269-3604
e-mail: [EMAIL PROTECTED]


   
  
raminder.braich
  
@DAVEY.COM To: [EMAIL PROTECTED]
  
Sent by:   cc: 
  
[EMAIL PROTECTED]Subject: Re: TSM 3.7 CLIENT problem 
ANR0444W  
T.EDU  (out of sequence verb)  
  
   
  
   
  
07/11/01 12:49 
  
PM 
  
Please respond 
  
to ADSM-L  
  
   
  
   
  




What is the verb name? Also what is the size of the tsm client?
> -Original Message-
> From: Angelica Tulipano [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, July 11, 2001 1:08 PM
> To:   [EMAIL PROTECTED]
> Subject:  Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)
>
> I'm having this problem in a tsm client, someone of you know what can it
> be?
>
> ANR0444W Protocol error on session session number for node client node
> name (client platform) - out-of-sequence verb (type verb
> name)
> received.
>
> Thanks
>
>  Angélica Tulipano
> Phone (507) 263-9977 ext 202
> Fax (507) 269-3604
> e-mail: [EMAIL PROTECTED]
>

Re: Schedule DB Backup not executing.

[Rajesh Oak]

Did you check to see if the schedule is Active. Someone might have turned it off by 
mistake.

Rajesh Oak
--

On Fri, 13 Jul 2001 08:25:59
 Poland, Neil wrote:
>Is there anything in the actlog indicating it started and failed? Maybe,
>because there aren't enough drives and the db backup doesn't have a high
>enough priority to override the stg pool backup?
>
>When you query admin events, does it even show up as a future event?
>
>-Original Message-
>From: Martin, Jon R. [mailto:[EMAIL PROTECTED]]
>Sent: Friday, July 13, 2001 8:03 AM
>To: [EMAIL PROTECTED]
>Subject: Schedule DB Backup not executing.
>
>
>We use the following schedule to do a daily full backup of the database.
>This is TSM 3.7 running on AIX 4.3.3.  The past week I have noticed that
>this schedule does not appear to be executing at all.  The only other
>process that is consistently running at this time is a storage pool backup.
>I can start the db backup manually with no problems using the same command
>listed in the schedule.  This schedule has worked for a long time and I can
>not recall any changes we have made in the past month that could be a cause.
>Any ideas on this problem.
>
>
>tsm:>q sched DBBACKUP_FULL type=admin f=d
>
>Schedule Name: DBBACKUP_FULL
>Description: Full db backup
>Command: backup db devclass=3570 type=full scratch=yes wait=yes
>Priority: 5
>Start Date/Time: 10/08/99   08:00:00
>Duration: 1 Hour(s)
>Period: 1 Day(s)
>Day of Week: Any
>Expiration:
>Active?: Yes
>Last Update by (administrator): x
>Last Update Date/Time: 07/12/01   15:52:42
>Managing profile:
>
>Thanks,
>
>Jon Martin
>


Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/

Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)

[Angelica Tulipano]

I created the service again with the password, change also the password of
the client, reinstall it and the problem continues... thanks for your help.

Ing. Angélica Tulipano
GBM de Panamá, S.A.
Phone (507) 263-9977 ext 202
Fax (507) 269-3604
e-mail: [EMAIL PROTECTED]


   

dthorneycroft  

@LACSD.ORG   To: [EMAIL PROTECTED]  

Sent by: cc:   

[EMAIL PROTECTED]Subject: Re: TSM 3.7 CLIENT problem 
ANR0444W  
IST.EDU  (out of sequence verb)

   

   

07/11/01   

01:16 PM   

Please 

respond to 

ADSM-L 

   

   





Check your password.
I've seen similar errors when starting the scheduler service with
the wrong password.

On Wednesday, July 11, 2001 10:08 AM, Angelica Tulipano
[SMTP:[EMAIL PROTECTED]]
wrote:
> I'm having this problem in a tsm client, someone of you know what can it
> be?
>
> ANR0444W Protocol error on session session number for node client node
> name (client platform) - out-of-sequence verb (type verb
> name)
> received.
>
> Thanks
>
>  Angelica Tulipano
> Phone (507) 263-9977 ext 202
> Fax (507) 269-3604
> e-mail: [EMAIL PROTECTED]
>

Re: WIN NT CLIENTS PROBLEM.Confused.

[Rajesh Oak]

Check the dsm.opt file. If the parameter
DOMAIN  ALL-LOCAL
is present it will pick up all the drives including mapped drives.
Else you will have to put in the
DOMAIN  C:
DOMAIN  D:
in the dsm.opt file.


Rajesh Oak
--

On Fri, 13 Jul 2001 09:31:33
 PINNI, BALANAND (SBCSI) wrote:
>Hi
>
>Recently some NT Clients have been giving problems intermittently.
>Every day some clients at random  on 3 different AIX TSM  servers don't
>backup
>d and e drives but c drive  does get backed up.
>PL help!!
>I am really confused!!
>Its random not consistent with clients.
>I would really appreciate any help pl.
>I don't find any problems on AIX /HP/SUN Boxes.
>balanand pinni
>


Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/

Re: Schedule DB Backup not executing.

[Nicholas Cassimatis]

You have "xx" in as the last updater of the schedule.  Not sure if your
TSM Admin ID is really a string of x's or not, but if that ID isn't present
on the system any more, or no longer has the authority to run the BACKUP DB
command, the schedule will fail.  Also, since you're going to a scratch
tape, you need to make sure you have scratch tapes available.  You should
see some entries in the actlog around 08:00 to tell you why it failed.

Nick Cassimatis
[EMAIL PROTECTED]

Today is the tomorrow of yesterday.

Re: Antwort: Re: using compression on netware tsm clients

[Richard Sims]

>The solution cannot be to use more powerfull clients.

Hmm.  Given that, and whereas it takes 10x longer for the client to
do backups with compression than without, does your client backup
log show retries with compression?  I'm wondering if it's something
like having COMPRESSAlways No in effect and the files already being
compressed such that the expand in client compression and the
transaction has to be repeated?  There should be some indication in
your logs as to why this behavior is occurring.  If not, consider
activating client tracing for a sample job.

  Richard Sims, BU

WIN NT CLIENTS PROBLEM.Confused.

[PINNI, BALANAND (SBCSI)]

Hi

Recently some NT Clients have been giving problems intermittently.
Every day some clients at random  on 3 different AIX TSM  servers don't
backup
d and e drives but c drive  does get backed up.
PL help!!
I am really confused!!
Its random not consistent with clients.
I would really appreciate any help pl.
I don't find any problems on AIX /HP/SUN Boxes.
balanand pinni

Antwort: Re: using compression on netware tsm clients

[Juergen Heinrich]

Hi John,

thank you for your prompt answer.
The client machine are very powerfull because they are used as file and print
servers for
over 500 users. (Compaq ProLiant Server)
The same machines are used as Notes Servers under Windows NT and the compression
works.
The solution cannot be to use more powerfull clients.

Sincerly
Jürgen

Has anybody seen this error??

[Amini, Mehdi]

When upgrading Terminal Server TSM from 3.7.1.0 to 4.1, I got this error

Error 1327, invalid Drive: P:\

Please help

Thanks

Mehdi Amini
LAN/WAN Engineer
ValueOptions
3110 Fairview Park Drive
Falls Church, VA 22042
Phone: 703-208-8754
Fax: 703-205-6879




**
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the sender by email, delete and destroy this message and its
attachments.


**

Re: AW: SQL on OS390

[Toora, Kuli]

i think there is a command -noprompt that may help here.

I have TSM on OS390 2.7 and the SQL syntax i use is :

//STEP01  EXEC PGM=IKJEFT1B,DYNAMNBR=100,REGION=4M,ACCT=38
//STEPLIB  DD DSN=CEE.SCEERUN,DISP=SHR
//SYSTSPRT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SYSTCPD  DD DSN=TCP.SYSB.TCPPARMS(TCPDATA),DISP=SHR 
//DSCOPT   DD DSN='options file',DISP=SHR
//DSCLANG  DD DSN=ADSM.V3R1M0.SANSMSG(ANSMENU),DISP=SHR   
//SYSTSIN  DD *   
ANSADM -ID= -PAS= -NOCONFIRM
//SYSINDD *  
SET SQLDISPLAYMODE W 
SELECT * -   
FROM BACKUPS -   
WHERE NODE_NAME ='**' -
> 'dataset name' 
QUIT 
/*   

this has been working fine without problems.

Thanks,

Kuli Toora
Npower
Enterprise Services
Kingswinford

01384 275346
Mobile : 07989 492903

mailto:[EMAIL PROTECTED]



-Original Message-
From: Bruno Calce [mailto:[EMAIL PROTECTED]]
Sent: 13 July 2001 14:50
To: [EMAIL PROTECTED]
Subject: AW: AW: SQL on OS390


I haven't found out yet how to turn off the prompt. I don't know
when this message appears and when it doesn't (one time the same query
runs without getting this message, the other time it gets it).
i really would like to know, what happens inside dsmadmc...

anyway, the prompt loop can be avoided by inserting a line in the 
SYSIN after the query statement with the response 'YES'. I did it
once, and the prompt never came back again .

sorry for not being more accurate, but i also spent too much time
on finding out what should be documented. hope this works!

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 15:19
An: [EMAIL PROTECTED]
Betreff: Re: AW: SQL on OS390

Well, this is a lot closer to what I am looking for.

It almost worked.

Now it gets stuck in a prompt loop:

ANR2963W This SQL query may produce a very large result table ...

Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
..

Is there a way to turn off the prompts ?





Bruno Calce <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 08:39 AM
Please respond to "ADSM: Dist Stor Manager"

 
To: [EMAIL PROTECTED]
cc: 
Subject:AW: SQL on OS390


hello,
i guess you have to use QUIT before the "/*".

my job looks like this and it works://S99QBAT JOB  NOTIFY=S99Q

//**
//* EXECUTE ADMIN CLIENT IN BATCH  *
//**
//SERVER  EXEC PGM=DSMADMC, 
//PARM='/-ID=BAT -PA=BATUSER1' 
//SYSPRINT DD SYSOUT=* 
//SYSINDD * 
  SELECT MSGNO,MESSAGE,DATE_TIME FROM ACTLOG WHERE - 
 ORIGINATOR='SERVER' AND - 
 (SEVERITY='E' OR SEVERITY='W' OR MSGNO=) - 
 AND DATE_TIME>='2001-07-01 00:00:00.00' 
  QUIT 
//DSCOPT   DD DISP=SHR,DSN=DSM1.ADMIN.OPTIONS 
//DSCLANG  DD DISP=SHR,DSN=SYS1.SANSMSG(ANSMENU) 

regards
bruno

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 14:19
An: [EMAIL PROTECTED]
Betreff: Re: SQL on OS390

Thanks for the many answers about using "+". However, it doesn't work.

I guess I didn't make my self clear.   I am running ADSM in batch, not
"TSO in BATCH" !!

The only reason the "+" works is because it is TSO in BATCH !  Here is
what I am trying to do:

//STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
//STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
//DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
//SYSPRINT DD   SYSOUT=*
//SYSINDD   *
 select volume_name,stgpool_name,pct_utilized from volumes where
 pct_utilized<40 order by pct_utilized > forray.volutil
/*

I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
nothing. I get:

adsm> ANR2907E Unexpected SQL operator token - '/'.
   |
 ..V
 lect volume_name,stgpool_name,pct_utilized from volumes where /

ANS8001I Return code 3.

Note, this works for almost everything else TSM allows as a command.





Luuk Kleibrink <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 02:46 AM
Please respond to "ADSM: Dist Stor Manager"


To: [EMAIL PROTECTED]
cc:
Subject:Re: SQL on OS390


Zoltan,

This works (NOTE: don't put spaces around the comma's, this might be your
problem)

One machine= (one big db and one TSM server) or (two smaller db and two TSM servers)

[Adam Boyer]

Hello,

We will be moving all of our backup clients over to TSM shortly.  Currently,
we are in the designing phase, and one of our major questions is this:

One of our future backup clients is quite big, with around 30 million
objects.  This is probably not far from the sum of all objects on all of our
other future clients.

We have one backup server, a Sun UE450 with 4 x 300 MHz CPUs and up to two GB
RAM available for our use.

We are wondering if it is advantageous to run two TSM servers on that one
machine.  One instance and its databse would be dedicated to the one big
client, and one instance of the TSM server would be for everything else.
This would make one large database into two smaller databases, possibly
improving performance of TSM operations for the majority of machines in our
environment.  But, then we'd also have two servers competing for resources,
etc.

So, to sum:  how much of a negative impact would doubling our database size,
from 22 GB to 44 GB, have?  Could this be allayed by running two TSM servers
on our backup server?  Are there other considerations/complications?

Any advice is greatly appreciated.

(I searched the archives, however, so please do not refer me to them in
general, but if you know of a specific message that pertains, that would be
great.)


Adam J Boyer
Communications Analyst
Board of Governors of the Federal Reserve System

AW: AW: SQL on OS390

[Bruno Calce]

I haven't found out yet how to turn off the prompt. I don't know
when this message appears and when it doesn't (one time the same query
runs without getting this message, the other time it gets it).
i really would like to know, what happens inside dsmadmc...

anyway, the prompt loop can be avoided by inserting a line in the 
SYSIN after the query statement with the response 'YES'. I did it
once, and the prompt never came back again .

sorry for not being more accurate, but i also spent too much time
on finding out what should be documented. hope this works!

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 15:19
An: [EMAIL PROTECTED]
Betreff: Re: AW: SQL on OS390

Well, this is a lot closer to what I am looking for.

It almost worked.

Now it gets stuck in a prompt loop:

ANR2963W This SQL query may produce a very large result table ...

Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
..

Is there a way to turn off the prompts ?





Bruno Calce <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 08:39 AM
Please respond to "ADSM: Dist Stor Manager"

 
To: [EMAIL PROTECTED]
cc: 
Subject:AW: SQL on OS390


hello,
i guess you have to use QUIT before the "/*".

my job looks like this and it works://S99QBAT JOB  NOTIFY=S99Q

//**
//* EXECUTE ADMIN CLIENT IN BATCH  *
//**
//SERVER  EXEC PGM=DSMADMC, 
//PARM='/-ID=BAT -PA=BATUSER1' 
//SYSPRINT DD SYSOUT=* 
//SYSINDD * 
  SELECT MSGNO,MESSAGE,DATE_TIME FROM ACTLOG WHERE - 
 ORIGINATOR='SERVER' AND - 
 (SEVERITY='E' OR SEVERITY='W' OR MSGNO=) - 
 AND DATE_TIME>='2001-07-01 00:00:00.00' 
  QUIT 
//DSCOPT   DD DISP=SHR,DSN=DSM1.ADMIN.OPTIONS 
//DSCLANG  DD DISP=SHR,DSN=SYS1.SANSMSG(ANSMENU) 

regards
bruno

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 14:19
An: [EMAIL PROTECTED]
Betreff: Re: SQL on OS390

Thanks for the many answers about using "+". However, it doesn't work.

I guess I didn't make my self clear.   I am running ADSM in batch, not
"TSO in BATCH" !!

The only reason the "+" works is because it is TSO in BATCH !  Here is
what I am trying to do:

//STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
//STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
//DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
//SYSPRINT DD   SYSOUT=*
//SYSINDD   *
 select volume_name,stgpool_name,pct_utilized from volumes where
 pct_utilized<40 order by pct_utilized > forray.volutil
/*

I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
nothing. I get:

adsm> ANR2907E Unexpected SQL operator token - '/'.
   |
 ..V
 lect volume_name,stgpool_name,pct_utilized from volumes where /

ANS8001I Return code 3.

Note, this works for almost everything else TSM allows as a command.





Luuk Kleibrink <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 02:46 AM
Please respond to "ADSM: Dist Stor Manager"


To: [EMAIL PROTECTED]
cc:
Subject:Re: SQL on OS390


Zoltan,

This works (NOTE: don't put spaces around the comma's, this might be your
problem):

//TSO1 EXEC PGM=IKJEFT01
//SYSPRINT DD SYSOUT=X
//SYSTSPRT DD SYSOUT=X
//SYSTERM  DD SYSOUT=X
//SYSOUT   DD SYSOUT=X
//SYSTCPD  DD DSN=SYS1.TCPPARMS(TCPDATA),DISP=SHR
//DSCOPT   DD DSN=SYP.TSM.TSOADMIN.OPTIONS,DISP=SHR
//DSCLANG  DD DSN=SYS2.TSM.SANSMSG(ANSMENU),DISP=SHR
//SYSTSIN  DD *
 DSMADMC -ID=id -PA=password -OUT='OS390 data set name' +
 SELECT STGPOOL_NAME,SUM(NUM_FILES) AS FILES, +
 SUM(LOGICAL_MB) AS MB,NODE_NAME FROM OCCUPANCY +
 GROUP BY STGPOOL_NAME,NODE_NAME ORDER BY NODE_NAME,STGPOOL_NAME

Luuk Kleibrink
Delta Lloyd Nuts Ohra

Re: using compression on netware tsm clients

[Lindsay Morris]

Look at idlewait (client think time and compression time, comm wait (network
time), and media wait (TSM server time) in the accounting log
(server-dir/dsmaccnt.log - you may need to SET ACCOUNTING ON)

Then you can definitely see where the slowdown is.  Compression on a low-end
client will slow things down.  Can your netwrok hardware do compression
instead?

> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Juergen Heinrich
> Sent: Friday, July 13, 2001 9:43 AM
> To: [EMAIL PROTECTED]
> Subject: using compression on netware tsm clients
>
>
>
>
> Hi,
>
> We are using compression on tsm netware clients (netware version
> 5.0 and 5.1).
> The Netware Server are dual pentium systems with 256 and 512 MByte RAM
> The TSM Client Version is 4.1.2.13
> The client option file:
> (See attached file: Dsm.opt)
>
> The backup speed of the incremental backup is very slow.
> We do need compression, because we are using WAN connections (max speed
> 256 KBit/s) to the TSM server.
>
> We have tested the uncompressed and compressed backup in a LAN (100 MBit/s
> ethernet)
> environment.
> It seems to be that the speed of uncompressed backups is up to 10
> time higher!
>
> Did anybody know a solution for this problem?
> sincerly
>
> Juergen Heinrich
> Verdi Information Consult GmbH
> Wittestrasse 30 K
> D 13509 Berlin
> Germany
>
> Phone:+49 (0)30 / 43 73 67 0
> Mobil:+49 170 / 3115109
> Fax: +49 30 / 437367-16
>

Re: AW: SQL on OS390

[Zoltan Forray/AC/VCU]

Well, this is a lot closer to what I am looking for.

It almost worked.

Now it gets stuck in a prompt loop:

ANR2963W This SQL query may produce a very large result table ...

Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
Do you wish to proceed? (Yes/No)
..

Is there a way to turn off the prompts ?





Bruno Calce <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 08:39 AM
Please respond to "ADSM: Dist Stor Manager"

 
To: [EMAIL PROTECTED]
cc: 
Subject:AW: SQL on OS390


hello,
i guess you have to use QUIT before the "/*".

my job looks like this and it works://S99QBAT JOB  NOTIFY=S99Q

//**
//* EXECUTE ADMIN CLIENT IN BATCH  *
//**
//SERVER  EXEC PGM=DSMADMC, 
//PARM='/-ID=BAT -PA=BATUSER1' 
//SYSPRINT DD SYSOUT=* 
//SYSINDD * 
  SELECT MSGNO,MESSAGE,DATE_TIME FROM ACTLOG WHERE - 
 ORIGINATOR='SERVER' AND - 
 (SEVERITY='E' OR SEVERITY='W' OR MSGNO=) - 
 AND DATE_TIME>='2001-07-01 00:00:00.00' 
  QUIT 
//DSCOPT   DD DISP=SHR,DSN=DSM1.ADMIN.OPTIONS 
//DSCLANG  DD DISP=SHR,DSN=SYS1.SANSMSG(ANSMENU) 

regards
bruno

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 14:19
An: [EMAIL PROTECTED]
Betreff: Re: SQL on OS390

Thanks for the many answers about using "+". However, it doesn't work.

I guess I didn't make my self clear.   I am running ADSM in batch, not
"TSO in BATCH" !!

The only reason the "+" works is because it is TSO in BATCH !  Here is
what I am trying to do:

//STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
//STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
//DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
//SYSPRINT DD   SYSOUT=*
//SYSINDD   *
 select volume_name,stgpool_name,pct_utilized from volumes where
 pct_utilized<40 order by pct_utilized > forray.volutil
/*

I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
nothing. I get:

adsm> ANR2907E Unexpected SQL operator token - '/'.
   |
 ..V
 lect volume_name,stgpool_name,pct_utilized from volumes where /

ANS8001I Return code 3.

Note, this works for almost everything else TSM allows as a command.





Luuk Kleibrink <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 02:46 AM
Please respond to "ADSM: Dist Stor Manager"


To: [EMAIL PROTECTED]
cc:
Subject:Re: SQL on OS390


Zoltan,

This works (NOTE: don't put spaces around the comma's, this might be your
problem):

//TSO1 EXEC PGM=IKJEFT01
//SYSPRINT DD SYSOUT=X
//SYSTSPRT DD SYSOUT=X
//SYSTERM  DD SYSOUT=X
//SYSOUT   DD SYSOUT=X
//SYSTCPD  DD DSN=SYS1.TCPPARMS(TCPDATA),DISP=SHR
//DSCOPT   DD DSN=SYP.TSM.TSOADMIN.OPTIONS,DISP=SHR
//DSCLANG  DD DSN=SYS2.TSM.SANSMSG(ANSMENU),DISP=SHR
//SYSTSIN  DD *
 DSMADMC -ID=id -PA=password -OUT='OS390 data set name' +
 SELECT STGPOOL_NAME,SUM(NUM_FILES) AS FILES, +
 SUM(LOGICAL_MB) AS MB,NODE_NAME FROM OCCUPANCY +
 GROUP BY STGPOOL_NAME,NODE_NAME ORDER BY NODE_NAME,STGPOOL_NAME

Luuk Kleibrink
Delta Lloyd Nuts Ohra

Re: SQL on OS390

[Christo Heuër]

Hi Zoltan,

Why don't you run the tso batch interface - seeing that your current way
does not work as you've indicated.
The sample JCL I sent you uses IKJEFT01 utility which gives you a
batch interface into TSO - which in turn gives you an interface into the
admin client - as far as I can make out this is what you want to achieve.
Seeing that the + works in batch why not go for it - you have nothing to
loose.

Cheers
Christo

> Thanks for the many answers about using "+". However, it doesn't work.
>
> I guess I didn't make my self clear.   I am running ADSM in batch, not
> "TSO in BATCH" !!
>
> The only reason the "+" works is because it is TSO in BATCH !  Here is
> what I am trying to do:
>
> file://STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
> file://STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
> file://DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
> file://DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
> file://SYSPRINT DD   SYSOUT=*
> file://SYSINDD   *
>  select volume_name,stgpool_name,pct_utilized from volumes where
>  pct_utilized<40 order by pct_utilized > forray.volutil
> /*
>
> I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
> nothing. I get:
>
> adsm> ANR2907E Unexpected SQL operator token - '/'.
>|
>  ..V
>  lect volume_name,stgpool_name,pct_utilized from volumes where /
>
> ANS8001I Return code 3.
>
> Note, this works for almost everything else TSM allows as a command.
>
>
>
>
>
> Luuk Kleibrink <[EMAIL PROTECTED]>
> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
> 07/13/2001 02:46 AM
> Please respond to "ADSM: Dist Stor Manager"
>
>
> To: [EMAIL PROTECTED]
> cc:
> Subject:Re: SQL on OS390
>
>
> Zoltan,
>
> This works (NOTE: don't put spaces around the comma's, this might be your
> problem):
>
> file://TSO1 EXEC PGM=IKJEFT01
> file://SYSPRINT DD SYSOUT=X
> file://SYSTSPRT DD SYSOUT=X
> file://SYSTERM  DD SYSOUT=X
> file://SYSOUT   DD SYSOUT=X
> file://SYSTCPD  DD DSN=SYS1.TCPPARMS(TCPDATA),DISP=SHR
> file://DSCOPT   DD DSN=SYP.TSM.TSOADMIN.OPTIONS,DISP=SHR
> file://DSCLANG  DD DSN=SYS2.TSM.SANSMSG(ANSMENU),DISP=SHR
> file://SYSTSIN  DD *
>  DSMADMC -ID=id -PA=password -OUT='OS390 data set name' +
>  SELECT STGPOOL_NAME,SUM(NUM_FILES) AS FILES, +
>  SUM(LOGICAL_MB) AS MB,NODE_NAME FROM OCCUPANCY +
>  GROUP BY STGPOOL_NAME,NODE_NAME ORDER BY NODE_NAME,STGPOOL_NAME
>
> Luuk Kleibrink
> Delta Lloyd Nuts Ohra

Re: using compression on netware tsm clients

[John Naylor]

Juergen,

Looks like your client machines are not powerful enough.

John




**
The information in this E-Mail is confidential and may be legally
privileged. It may not represent the views of Scottish and Southern
Energy plc.
It is intended solely for the addressees. Access to this E-Mail by
anyone else is unauthorised. If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted
to be taken in reliance on it, is prohibited and may be unlawful.
Any unauthorised recipient should advise the sender immediately of
the error in transmission.

Scottish Hydro-Electric and Southern Electric are trading names of
Scottish and Southern Energy Group.
**

Re: Schedule DB Backup not executing.

[Poland, Neil]

Is there anything in the actlog indicating it started and failed? Maybe,
because there aren't enough drives and the db backup doesn't have a high
enough priority to override the stg pool backup?

When you query admin events, does it even show up as a future event?

-Original Message-
From: Martin, Jon R. [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 8:03 AM
To: [EMAIL PROTECTED]
Subject: Schedule DB Backup not executing.


We use the following schedule to do a daily full backup of the database.
This is TSM 3.7 running on AIX 4.3.3.  The past week I have noticed that
this schedule does not appear to be executing at all.  The only other
process that is consistently running at this time is a storage pool backup.
I can start the db backup manually with no problems using the same command
listed in the schedule.  This schedule has worked for a long time and I can
not recall any changes we have made in the past month that could be a cause.
Any ideas on this problem.


tsm:>q sched DBBACKUP_FULL type=admin f=d

Schedule Name: DBBACKUP_FULL
Description: Full db backup
Command: backup db devclass=3570 type=full scratch=yes wait=yes
Priority: 5
Start Date/Time: 10/08/99   08:00:00
Duration: 1 Hour(s)
Period: 1 Day(s)
Day of Week: Any
Expiration:
Active?: Yes
Last Update by (administrator): x
Last Update Date/Time: 07/12/01   15:52:42
Managing profile:

Thanks,

Jon Martin

Re: How to make to inclexcl list to fit my needs???

[Richard Sims]

>I am trying to build an include/exclude list for a
>HPUX box. I want to backup something sometimes and not
>to backup this same thing others, the problem is that
>if I put it on an exclude statement, I will never be
>able to backup it unless I include it again.
...
>I have already tryied to use two incl/excl lists but
>when I use the second one and some file that was
>included is now excluded it is automaticly deleted by
>an expiration process.

David - You can use two incl/excl lists...but in your current case,
TSM sees them as applying to the same filespace, so you
have the dilemma you encountered.  What can do is make TSM believe that the
single filespace is two different filespaces.  Recall that files are unique per
the combination of nodename, filespace name, and filename.  If you institute
an alternate nodename in your client, you can have an alternate image of your
filespace on the server (in total).  You can achieve this via an alternate
server stanza in your dsm.sys file which specifies a nodename of convenience for
your purposes.  Whether you want to commit that much redundant server space is
a decision factor.

  Richard Sims, BU

bare metal restore

[Joseph Dawes]

Has anyone used Bare metal restore? and if yes does it work well??




J

using compression on netware tsm clients

[Juergen Heinrich]

Hi,

We are using compression on tsm netware clients (netware version 5.0 and 5.1).
The Netware Server are dual pentium systems with 256 and 512 MByte RAM
The TSM Client Version is 4.1.2.13
The client option file:
(See attached file: Dsm.opt)

The backup speed of the incremental backup is very slow.
We do need compression, because we are using WAN connections (max speed
256 KBit/s) to the TSM server.

We have tested the uncompressed and compressed backup in a LAN (100 MBit/s
ethernet)
environment.
It seems to be that the speed of uncompressed backups is up to 10 time higher!

Did anybody know a solution for this problem?
sincerly

Juergen Heinrich
Verdi Information Consult GmbH
Wittestrasse 30 K
D 13509 Berlin
Germany

Phone:+49 (0)30 / 43 73 67 0
Mobil:+49 170 / 3115109
Fax: +49 30 / 437367-16

 Dsm.opt

Schedule DB Backup not executing.

[Martin, Jon R.]

We use the following schedule to do a daily full backup of the database.
This is TSM 3.7 running on AIX 4.3.3.  The past week I have noticed that
this schedule does not appear to be executing at all.  The only other
process that is consistently running at this time is a storage pool backup.
I can start the db backup manually with no problems using the same command
listed in the schedule.  This schedule has worked for a long time and I can
not recall any changes we have made in the past month that could be a cause.
Any ideas on this problem.


tsm:>q sched DBBACKUP_FULL type=admin f=d

Schedule Name: DBBACKUP_FULL
Description: Full db backup
Command: backup db devclass=3570 type=full scratch=yes wait=yes
Priority: 5
Start Date/Time: 10/08/99   08:00:00
Duration: 1 Hour(s)
Period: 1 Day(s)
Day of Week: Any
Expiration:
Active?: Yes
Last Update by (administrator): x
Last Update Date/Time: 07/12/01   15:52:42
Managing profile:

Thanks,

Jon Martin

Re: SQL on OS390

[John Naylor]

Zoltan.

<<  Thanks for the many answers about using "+". However, it doesn't work. >>

<<  I guess I didn't make my self clear.   I am running ADSM in batch, not >>
<<  "TSO in BATCH" >>

Why do you not want to run your batch sql using the ikjeft01 batch program and
calling a macro ?
That way you can build up a library of your all commonly used sql.
See below some rexx for invoking the dsmc tso interface in the batch jcl uusing
the ikjeft01 program

/*rexx*/
 //
 /* Routine : DSMC   Type : TSO/ISPF */
 /*  */
 /* Exec to invoke the ADSM TSO administrative client interface. This*/
 /* allows you to issue commands to ADSM without issuing MVS commands*/
 /*  */
 /*  Invocation : >-- DSMC ---<  */
 /*  */
 /*  Input  : None   */
 /*  */
 /*  Output : N/A*/
 /*  */
 /*  Externals  : None   */
 /*  */
 /*  Futures: None   */
 /*  */
 //
Arg parms


dummy = PROMPT(ON)/* PROMPT must be ON for the i/f   */
  /* to work..without it the session */
  /* is severed before p/w checking  */

dummy = OUTTRAP('status.')
"STATUS ADSM"
dummy = OUTTRAP(OFF)
ADSM_OK = 0
Do ctr = 1 to status.0/* Scan the STATUS o/p...  */
  If POS('EXECUTING',status.ctr) > 0 then
do/* looking for EXECUTING message   */
  ADSM_OK = 1 /* to indicate ADSM is active  */
  LEAVE ctr
end
End

If ADSM_OK then NOP
  else/* ADSM not up,so can't continue   */
do
  Say 'DSMC TSO client interface is not available as ADSM is not'
  Say 'running on this system.'
  Exit
end

"ALLOC F(DSCOPT)  DA('SMS.PARMLIB(DSMCOPTS)') SHR REU"
"ALLOC F(DSCLANG) DA('SYS1.SANSMSG(ANSMENU)') SHR REU"

"CALL 'SYS1.LINKLIB(DSMADMC)' '"parms"'"

"FREE F(DSCOPT DSCLANG )"

Exit


Hope this helps

John




**
The information in this E-Mail is confidential and may be legally
privileged. It may not represent the views of Scottish and Southern
Energy plc.
It is intended solely for the addressees. Access to this E-Mail by
anyone else is unauthorised. If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted
to be taken in reliance on it, is prohibited and may be unlawful.
Any unauthorised recipient should advise the sender immediately of
the error in transmission.

Scottish Hydro-Electric and Southern Electric are trading names of
Scottish and Southern Energy Group.
**

Re: How to make to inclexcl list to fit my needs???

[Martin, Jon R.]

David,

I experienced a similar situation.  I excluded the object in
general.  For the occasions when I wanted to back that object up I used
include as an option to my backup command and specified the area in
question.

Thanks,

Jon Martin

-Original Message-
From: David Ruiz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 12, 2001 8:24 PM
To: [EMAIL PROTECTED]
Subject: How to make to inclexcl list to fit my needs???


Hi all TSMers,

I am trying to build an include/exclude list for a
HPUX box. I want to backup something sometimes and not
to backup this same thing others, the problem is that
if I put it on an exclude statement, I will never be
able to backup it unless I include it again. I have
this:

/opt/tivoli
/opt/OMImag
/opt/netscape
/opt/MC1
/opt/MC2
.
.
/opt/MC6
/opt/data
/opt/development
.
.
.
/opt/lotsofdirs

I want to backup the whole /opt filesystem but the MC1
and MC2...MC6 in the night and to backup only this MC*
at in the day.

I have already tryied to use two incl/excl lists but
when I use the second one and some file that was
included is now excluded it is automaticly deleted by
an expiration process.

I tryied to do the backup with a dsmc command but it
becomes an never-ending line (too long).

Hope you can give some advice.

David.




__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Re: SQL on OS390

[MC Matt Cooper (2838)]

I use the same mechanism but I can fit it all on 1 PDS member.

//TSMJOB1  EXEC PGM=IKJEFT01
//STEPLIB  DD   DSN=SYS1.CEE.SCEERUN,DISP=SHR
//DSCLANG  DD DSN=SYS1.TSM.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD DSN=AGPP.TSM.TSOADMIN.OPTIONS,DISP=SHR
//SYSHELP  DD DSN=SYS1.TCPIP.SEZAHELP,DISP=SHR
//SYSIN  DD  DUMMY
//SYSTSIN DD *
DSMADMC -ID= -PASSWORD= MACRO DD:TRYME
//TRYME DD *
 select * from -
  backups where -
   node_name='USCLES803' -
  and  backup_date<'2001-04-01'  -
   order by BACKUP_DATE
/*
//SYSTSPRT  DD SYSOUT=*
//SYSUDUMP DD SYSOUT=*

Hope it helps,
Matt

-Original Message-
From: Bill Colwell [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 12, 2001 4:07 PM
To: [EMAIL PROTECTED]
Subject: Re: SQL on OS390

Zoltan,

I use a plus sign, but I don't try to put long selects into the call
command,
instead I use a macro.  Here is some jcl and a macro -

//QUERYVOL EXEC PGM=IKJEFT01,DYNAMNBR=100
/SYSPRINT DD  SYSOUT=*
//SYSTSPRT DD  SYSOUT=*
//SYSTSIN  DD *
FREE F(DSCLANG DSCOPT)
DEL   'mytsoid.SELVOLS.OUTPUT'
ALLOC F(DSCLANG) DA('ADSM.V3R1M21.SANSMSG(ANSMENU)') SHR REU
ALLOC F(DSCOPT) DA('ADSM.V3R1.ADMIN.PORT1600.TSOOPT') SHR REU
CALL 'ADSM.V3R1M21.LINKLIB(DSMADMC)' +
 '-ID=mytsmid -PASS=mypass +
 MACRO ''ADSM.V3R1.PROD.MACS(SELVOLS)'' '


/*  */
/* macro file to select all tape volumes*/
/*  */
/*  */
set sqldisplaymode w
select * -
   from adsm.volumes  -
   where stgpool_name ^= 'BACKUPPOOL' -
   > 'mytsoid.SELVOLS.OUTPUT'


Hope this helps,

--
--
Bill Colwell
C. S. Draper Lab
Cambridge, Ma.
[EMAIL PROTECTED]
--

In <[EMAIL PROTECTED]>, on 07/12/01
   at 04:06 PM, Zoltan Forray/AC/VCU <[EMAIL PROTECTED]> said:

>I see lots of SQL floating around here.

>Since my server is OS390, I tried a "query" in batch.  However, the
>command was too long for a 72-column "card".

>What character is used to continue SQL commands onto subsequent lines ?  I
>tried the standard "-" which works for almost *ALL* other OS390 utilities,
>but it didn't work for TSM.

>This is TSM 4.1.3.

>===
>Zoltan Forray
>Virginia Commonwealth University
>University Computing Center
>e-mail: [EMAIL PROTECTED]
>voice: 804-828-4807

AW: SQL on OS390

[Bruno Calce]

hello,
i guess you have to use QUIT before the "/*".

my job looks like this and it works://S99QBAT JOB  NOTIFY=S99Q

//**
//* EXECUTE ADMIN CLIENT IN BATCH  *
//**
//SERVER  EXEC PGM=DSMADMC, 
//PARM='/-ID=BAT -PA=BATUSER1'  
//SYSPRINT DD SYSOUT=*  
//SYSINDD * 
  SELECT MSGNO,MESSAGE,DATE_TIME FROM ACTLOG WHERE -
 ORIGINATOR='SERVER' AND -  
 (SEVERITY='E' OR SEVERITY='W' OR MSGNO=) - 
 AND DATE_TIME>='2001-07-01 00:00:00.00'
  QUIT  
//DSCOPT   DD DISP=SHR,DSN=DSM1.ADMIN.OPTIONS   
//DSCLANG  DD DISP=SHR,DSN=SYS1.SANSMSG(ANSMENU)

regards
bruno

-Ursprüngliche Nachricht-
Von: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]]
Gesendet am: Freitag, 13. Juli 2001 14:19
An: [EMAIL PROTECTED]
Betreff: Re: SQL on OS390

Thanks for the many answers about using "+". However, it doesn't work.

I guess I didn't make my self clear.   I am running ADSM in batch, not
"TSO in BATCH" !!

The only reason the "+" works is because it is TSO in BATCH !  Here is
what I am trying to do:

//STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
//STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
//DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
//SYSPRINT DD   SYSOUT=*
//SYSINDD   *
 select volume_name,stgpool_name,pct_utilized from volumes where
 pct_utilized<40 order by pct_utilized > forray.volutil
/*

I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
nothing. I get:

adsm> ANR2907E Unexpected SQL operator token - '/'.
   |
 ..V
 lect volume_name,stgpool_name,pct_utilized from volumes where /

ANS8001I Return code 3.

Note, this works for almost everything else TSM allows as a command.





Luuk Kleibrink <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 02:46 AM
Please respond to "ADSM: Dist Stor Manager"


To: [EMAIL PROTECTED]
cc:
Subject:Re: SQL on OS390


Zoltan,

This works (NOTE: don't put spaces around the comma's, this might be your
problem):

//TSO1 EXEC PGM=IKJEFT01
//SYSPRINT DD SYSOUT=X
//SYSTSPRT DD SYSOUT=X
//SYSTERM  DD SYSOUT=X
//SYSOUT   DD SYSOUT=X
//SYSTCPD  DD DSN=SYS1.TCPPARMS(TCPDATA),DISP=SHR
//DSCOPT   DD DSN=SYP.TSM.TSOADMIN.OPTIONS,DISP=SHR
//DSCLANG  DD DSN=SYS2.TSM.SANSMSG(ANSMENU),DISP=SHR
//SYSTSIN  DD *
 DSMADMC -ID=id -PA=password -OUT='OS390 data set name' +
 SELECT STGPOOL_NAME,SUM(NUM_FILES) AS FILES, +
 SUM(LOGICAL_MB) AS MB,NODE_NAME FROM OCCUPANCY +
 GROUP BY STGPOOL_NAME,NODE_NAME ORDER BY NODE_NAME,STGPOOL_NAME

Luuk Kleibrink
Delta Lloyd Nuts Ohra

Re: do adsm supports image-backups

[Jeff Bach]

Customers? Does the Kernel Group bare metal work?  How hard is it to
maintain?  When will TSM provide a full solution?

Jeff


-Original Message-
From:   Richard Sims [SMTP:[EMAIL PROTECTED]]
Sent:   Friday, July 13, 2001 7:18 AM
To: [EMAIL PROTECTED]
Subject:Re: do adsm supports image-backups

>we use 'mksysb'  to backup OS image,VG information  and file
systesms. is
>it possible to do the same using ADSM .

Since a working operating system is a pre-req to using ADSM/TSM,
there's
not much value in using ADSM/TSM for the bare metal phase of system
recovery.  The Kernel Group is a principal provider of bare metal
restore
capabilities.  See  www.tkg.com/products.html .

   Richard Sims, BU


**
This email and any files transmitted with it are confidential
and intended solely for the individual or entity to
whom they are addressed.  If you have received this email
in error destroy it immediately.
**

Re: SQL on OS390

[Zoltan Forray/AC/VCU]

Thanks for the many answers about using "+". However, it doesn't work.

I guess I didn't make my self clear.   I am running ADSM in batch, not
"TSO in BATCH" !!

The only reason the "+" works is because it is TSO in BATCH !  Here is
what I am trying to do:

//STEP1EXEC PGM=DSMADMC,PARM='-ID=BATCHADM -PASSWORD=BATCHADM'
//STEPLIB  DD   DSN=TIVOLI.SANRLOAD,DISP=SHR
//DSCLANG  DD   DSN=TIVOLI.SANSMSG(ANSMENU),DISP=SHR
//DSCOPT   DD   DSN=TIVOLI.BATCH.OPTIONS(DSMOPT),DISP=SHR
//SYSPRINT DD   SYSOUT=*
//SYSINDD   *
 select volume_name,stgpool_name,pct_utilized from volumes where
 pct_utilized<40 order by pct_utilized > forray.volutil
/*

I have tried "-", "+" and even "/" as was suggested by a co-worker ! Still
nothing. I get:

adsm> ANR2907E Unexpected SQL operator token - '/'.
   |
 ..V
 lect volume_name,stgpool_name,pct_utilized from volumes where /

ANS8001I Return code 3.

Note, this works for almost everything else TSM allows as a command.





Luuk Kleibrink <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07/13/2001 02:46 AM
Please respond to "ADSM: Dist Stor Manager"


To: [EMAIL PROTECTED]
cc:
Subject:Re: SQL on OS390


Zoltan,

This works (NOTE: don't put spaces around the comma's, this might be your
problem):

//TSO1 EXEC PGM=IKJEFT01
//SYSPRINT DD SYSOUT=X
//SYSTSPRT DD SYSOUT=X
//SYSTERM  DD SYSOUT=X
//SYSOUT   DD SYSOUT=X
//SYSTCPD  DD DSN=SYS1.TCPPARMS(TCPDATA),DISP=SHR
//DSCOPT   DD DSN=SYP.TSM.TSOADMIN.OPTIONS,DISP=SHR
//DSCLANG  DD DSN=SYS2.TSM.SANSMSG(ANSMENU),DISP=SHR
//SYSTSIN  DD *
 DSMADMC -ID=id -PA=password -OUT='OS390 data set name' +
 SELECT STGPOOL_NAME,SUM(NUM_FILES) AS FILES, +
 SUM(LOGICAL_MB) AS MB,NODE_NAME FROM OCCUPANCY +
 GROUP BY STGPOOL_NAME,NODE_NAME ORDER BY NODE_NAME,STGPOOL_NAME

Luuk Kleibrink
Delta Lloyd Nuts Ohra

Re: logical volume backup or image backup

[Richard Sims]

>Does anyone know how to do an image backup or a logical volume backup ?

See  Raw Logical Volume (Image) Backup
in the B/A Client manual.

Re: selective backup

[Hali J Coleman]

I had this probelm as well.

You need to specify the filesystem this way --
/export/nim/mksysb/sysbkp/selective/*

Try that to see if it works.

Hali J. Coleman
Systems Management Integration Professional
ESS - Enterprise Storage Services
IBM Global Services
526-0514 (Tie Line)
919-486-0514 (External)
1-800-946-4646 PIN 1460993 (Pager)

"A Candle loses nothing by lighting another Candle... It only Shines
Brighter"


Pothula S Paparao/Singapore/Contr/IBM@[EMAIL PROTECTED]> on 07/13/2001
06:44:20 AM

Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>

Sent by:  "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>


To:   [EMAIL PROTECTED]
cc:
Subject:  selective backup


Hi TSMers,

when i choose selective backup to run. i shows the follwing message.

ANS1092E No files matching search criteria were found
ANS1804E Selective Backup processing of
'/export/nim/mksysb/sysbkp/selective' finished with failures.

but backup finished without failures. is this serious to notice ?

regards
sree.

logical volume backup or image backup

[Joseph Dawes]

Does anyone know how to do an image backup or a logical volume backup ? I
was told this is quicker to backup and restore because tsm looks at it like
it's one file. Please let me know. Thanks






J

Re: selective backup

[Arnaud Brion]

Hi Pothula,

Concerning message ANS1804E, I have no answer for you, but the most astonishing thing 
is your first message "No files matching search criteria were found" : if you're sure 
there were data in this directory, you should not have this message.
According to my own experience, you should have a look at your "exclude" statements in 
this client node option file : if you excluded this directory, even if you explicitely 
start a selective backup of it, nothing will be backed up !
Hope this helps ;-))
Arnaud

-Original Message-
From: Pothula S Paparao
Sent: Freitag, 13. Juli 2001 13:56
To: [EMAIL PROTECTED]
Subject: selective backup


Hi TSMers,

when i choose selective backup to run. i shows the follwing message.

ANS1092E No files matching search criteria were found
ANS1804E Selective Backup processing of
'/export/nim/mksysb/sysbkp/selective' finished with failures.

but backup finished without failures. is this serious to notice ?

regards
sree.

Re: do adsm supports image-backups

[Richard Sims]

>we use 'mksysb'  to backup OS image,VG information  and file systesms. is
>it possible to do the same using ADSM .

Since a working operating system is a pre-req to using ADSM/TSM, there's
not much value in using ADSM/TSM for the bare metal phase of system
recovery.  The Kernel Group is a principal provider of bare metal restore
capabilities.  See  www.tkg.com/products.html .

   Richard Sims, BU

Re: SQL on OS390

[Richard Sims]

> speaking of SQL, does anyone know where the SQL reference is for ADSM because
>it doesn't appear to be the same standard that we have on ORacle.

TSM SQL capabilities are subset, as described in the Admin Guide and Admin
Reference manuals.  See also the ADSMv3 Technical Guide redbook.
There is also: "Using the ADSM SQL Interface",
http://www.uni-karlsruhe.de/~rz57/ADSM/3rd/handouts/raibeck.ps
(a PostScript file, to print or see with a utility like the free Ghostscript or
GSview).

  Richard Sims, BU

Re: Restore on a different client machine?

[Pothula S Paparao]

hi ,
please try this option, it might help to suite ur needs. try this command
from aix prompt.

dsmc restore -virtualnodename=nodename -subdir=yes

regards
sree.


"Martin, Jon R." <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 07/13/2001 04:43:29

Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>

Sent by:  "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>


To:   [EMAIL PROTECTED]
cc:
Subject:  Re: Restore on a different client machine?


When you run the dsm session. There is an option to change you
login/connection from the menu bar ( FILE / LOGON ).  On the server you
want
to restore to login to dsm as the server you want to restore from.  From
there on it is the same as usual.



-Original Message-
From: Yahya Ilyas [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 12, 2001 4:18 PM
To: [EMAIL PROTECTED]
Subject: Restore on a different client machine?


Is it possible to restore to a different client machine?I need to do a
restore of a directory to a different client(node), both client machines
are
AIX 4.3.3.  Please send me details.

Thanks
Yahya

>   -
>   Yahya Ilyas
>   Systems Programmer Senior
>   Systems Integration & Management
>   Information Technology
>   Arizona State University, Tempe, AZ 85287-0101
>
>   [EMAIL PROTECTED]
>   Phone: (480) 965-4467
>
>

selective backup

[Pothula S Paparao]

Hi TSMers,

when i choose selective backup to run. i shows the follwing message.

ANS1092E No files matching search criteria were found
ANS1804E Selective Backup processing of
'/export/nim/mksysb/sysbkp/selective' finished with failures.

but backup finished without failures. is this serious to notice ?

regards
sree.

do adsm supports image-backups

[Pothula S Paparao]

we use 'mksysb'  to backup OS image,VG information  and file systesms. is
it possible to do the same using ADSM .
regards
sree.

Re: missing volumes

[Richard Sims]

>I have some volumes which appears in a "q libv" as
>follows...(ythis is just one of them)
>
>3575LIB1  11824F Private59
>
>The usual forth field of "Data" is not displayed. Does this mean that this
>is a "scratchable" tape???
>
>Also, from the actlog, the last entry for this tape is an atempted checkin,
>which has failed as ADSM says that the tape is already in the library.
>The next most recent entry for the tape is a "checkout" from the library,
>which has failed, because the tape it got was the wrong one(I think the
>inventory is stuffed.)
...

The fourth field from Query LIBVolume, Last Use, may be blank if the volume was
last used for a DUMPDB operation or, more commonly, the volume is empty and
Defined to a storage pool.  Query Volume should tell you more.

This is where your Activity Log comes into play.  Customers should have entries
going back as far as any volume is likely to have a single use, which may be a
year or more.  That is, you want to be able to determine what happened to
volumes in their last transition (from Scratch to Private, for example).
Perform a Query ACtlog search on those volumes to determine what has been
happening to them.

  Richard Sims, BU

Re: Restore on a different client machine?

[Pothula S Paparao]

hi yahya
try out this option from aix prompt of any node where u wanna restore this
directory or files.

dsmc restore -virtualnodname=nodename  

See that you have owenship permissions for accessing the above node or else
u can use 'admin' id to restore.

Yahya Ilyas <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 07/13/2001 04:17:35

Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>

Sent by:  "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>


To:   [EMAIL PROTECTED]
cc:
Subject:  Restore on a different client machine?


Is it possible to restore to a different client machine?I need to do a
restore of a directory to a different client(node), both client machines
are
AIX 4.3.3.  Please send me details.

Thanks
Yahya

>   -
>   Yahya Ilyas
>   Systems Programmer Senior
>   Systems Integration & Management
>   Information Technology
>   Arizona State University, Tempe, AZ 85287-0101
>
>   [EMAIL PROTECTED]
>   Phone: (480) 965-4467
>
>

Re: LTO 3583 terrible reclamation performance

[Fitzsimons, Peter]

Hi Don and Tomáš

The correct link for the firmware is
http://ssddom01.storage.ibm.com/techsup/swtechsup.nsf/support/ultrium3583fmr

The other link points to an older version of the firmware last time I
checked.

Also, before powering of the library to re-initialise the tape drives after
a firmware upgrade, open the door and let the robotics move to the bottom
under its own control. If you don't a cable may come loose when the robotics
hit the bottom



Peter Fitzsimons
Technology Expert
Netbridge Systems Integration
Phone   +61 8 8304 1777
Fax   +61 8 8304 1711

-Original Message-
From: France, Don G (Pace) [mailto:[EMAIL PROTECTED]] 
Sent: Wednesday, 11 July 2001 4:06 PM
Subject: Re: LTO 3583 terrible reclamation performance

Search the archives for "LTO Performance", for full history... the essential
item is your firmware level...

For 3580, 3581, and 3583 mach types (Customer Setup), the customer can
download 0CE1 from:
ftp://service.boulder.ibm.com/storage/358x
Choose 0CE1.fmr
Instructions for verifying the current LTO drive microcode release and how
to install the new release can be found in the IBM Ultrium Device 
Drivers Installation and Users Guide available from:
ftp://ftp.software.ibm.com/storage/devdrvr/
For 3584s, have the customer request his CE update the LTO drive microcode.


Don France
EDS Infrastructure Engineering
San Jose, CA
mailto:[EMAIL PROTECTED]   
PACE - http://www.pacepros.com   
Bus-Ph:   (408) 257-3037




-Original Message-
From: Hrouda Tomáš [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 10, 2001 9:59 PM
To: [EMAIL PROTECTED]
Subject: LTO 3583 terrible reclamation performance


Hi all,

one of our customer has terrible reclamation, move data and audit volume
performance on 3583 LTO library - about 40 MB/hour of reclaimed data
wvhole reclamation of one volume take "week", although backup and
restore operations goes at normal speed (seconds for megabytes). Any ideas?

TSM 4.1.3.0 on AIX 4.3.3, LTO 3583 (one drive) with last firmware 2.50.0025,
20GB reclaimpool on disk.
---
Odchozí zpráva neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.262 / Virová báze: 132 - datum vydání: 12.6.2001


**
This email may be confidential and/or privileged. Only the intended 
recipient may access or use it. Any dissemination, distribution or
copying of this email is strictly prohibited. If you are not the
intended recipient please notify us immediately by return email and
then erase the email.

We use virus scanning software but exclude all liability for viruses 
or similar in any attachment or message...,..,..,.
**

Auto clean of 3590 drive

[Ganu Sachin, IBM]

Hi

I have RS/6000 SP2 with AIX 4.3.3 and Tivoli Stoarge Manager 3.7.0. I have
3590 E11 & 3590 B11 connected to it. I use these drive for TSM use only. For
both the drives, I have set Clean option to ASNEEDED at TSM level. However
Autoclean is happening only for B11 and not E11 drive. Any guess ?

The Atape version is 5.0.2.0

Regards

Sachin Ganu